ViewSonic Pjl7211 Projector User Manual

PJL7211ViewSonic56

Regarding the indicator lamps (continued)
• When the interior portion has become overheated, for safety 
purposes, the projector is automatically shut down, and the indicator lamps 
may also be turned off. In such a case, disconnect the power cord, and wait at 
least 45 minutes. After the projector has sufficiently cooled down, please make 
confirmation of the attachment state of the lamp and lamp cover, and then turn 
the power on again.
NOTE
POWER 
indicator
LAMP 
indicator
TEMP...

PJL7211ViewSonic57

Phenomena that may be easy to be mistaken for machine defects
About the phenomenon confused with a machine defect, check and cope with it 
according to the following table.
PhenomenonCases not involving a machine defectReference page
Power does not come on.
The electrical power cord is not plugged in.
Correctly connect the power cord.
The main power source has been interrupted during operation such as by a power outage (blackout), etc.
Please disconnect the power plug from...

PJL7211ViewSonic58

Phenomena that may be easy to be mistaken for machine defects (continued)
PhenomenonCases not involving a machine defectReference 
page
Video screendisplay freezes.
The FREEZE function is working.
Press the FREEZE button to restore the screen to normal.0
Colors have afaded- outappearance, orColor tone is poor.
Color settings are not correctly adjusted.
Perform picture adjustments by changing the COLOR TEMP, COLOR, TINT and/or COLOR SPACE settings, using the menu functions.
26,...

PJL7211ViewSonic59

Specifications
Specification
ItemSpecification
Product nameLiquid crystal projector
Liquid Crystal Panel786,432 pixels (1024 horizontal x 768 vertical)
LensZoom lens,  f = 19 ~ 22 mm    (approximately)
Lamp190W UHP
Power supplyAC 100-120V/3.0A, AC220-240V/1.5A
Power consumption250W
Temperature range5 ~ 35°C (Operating)
Size317 (W) x 98 (H) x 288 (D) mm* Not including protruding parts. Please refer to the following figure.
Weight (mass)approx. 3.2kg
Ports
Computer input port...

PJL7211ViewSonic60
Specifications (continued)
AA
288
0.7
317
214103
30
95163
58.2
75.568.3
129.7
8.464.5
3.3
109.711.7
[UNIT:mm]
CEILING MOUNT SURFACE
LENS CENTERM4 INSERT NUTA-A5:13 THREADS DETAILS 

PJL7211ViewSonic6
Customer Support
For technical support or product service, see the table below or contact\
 your reseller.
Note : You will need the product serial number.
Country/RegionWeb SiteT=Telephone
F=FaxE-mail
Australia/New Zealandwww.viewsonic.com.auAUS=1800 880 818
NZ=0800 008 [email protected]
Canadawww.viewsonic.comT (Toll-Free)= 1-866-463-4775T (Toll)= 1-424-233-2533F= [email protected]
Europe/Middle East/Baltic countries/North...

PJL7211ViewSonic6

Limited Warranty
VIEWSONIC® PROJECTOR
What the warranty covers: 
ViewSonic warrants its products to be free from defects in material and w\
orkmanship, under 
normal use, during the warranty period. If a product proves to be defect\
ive in material or 
workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace 
the product with a like product. Replacement product or parts may includ\
e remanufactured or 
refurbished parts or components. 
Limited...

PJL7211ViewSonic63

How to get service: 
1.    For information about receiving service under warranty, contact ViewSonic Customer 
Support (please refer to “Customer Support” page). You will need to provide your product’s 
serial number.
2.    
To obtain warranted service, you will be required to provide (a) the or\
iginal dated sales slip, (b) your 
name, (c) your address, (d) a description of the problem, and (e) \
the serial number of the product.
3.     Take or ship the product freight prepaid in...

PJL7211ViewSonic64

Mexico Limited Warranty
VIEWSONIC® PROJECTOR
What the warranty covers:ViewSonic warrants its products to be free from defects in material and w\
orkmanship, under normal use, during the warranty period. If a product proves to be defective in \
material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a \
like product. Replacement product or parts may include remanufactured or refurbished p\
arts or components &...

PJL7211ViewSonic65

Contact Information for Sales & Authorized Service (Centro Autorizado de Servicio) within Mexico:
Name, address, of manufacturer and importers:México, Av. de la Palma #8 Piso 2 Despacho 203, Corporativo Interpalmas,Col. San Fernando Huixquilucan, Estado de MéxicoTel: (55) 3605-1099http://www.viewsonic.com/la/soporte/index.htm
NÚMERO GRATIS DE ASISTENCIA TÉCNICA PARA TODO MÉXICO: 001.866.823.2004
Hermosillo:Distribuciones y Servicios Computacionales SA de CV.Calle Juarez 284 local...