ViewSonic Pjl7211 Projector User Manual

PJL7211ViewSonic6

ItemDescription
COLOR TEMP
Using the ▲/▼ buttons switches the color temperature mode.
To adjust CUSTOM
Selecting a mode whose name includes CUSTOM and then pressing the ► button or the ENTER button displays a dialog to aid you in adjusting the OFFSET and GAIN of the selected mode.
OFFSET adjustments change the color intensity on the whole tones of the test pattern.
GAIN adjustments mainly affect color intensity on the brighter tones of the test pattern.
Choose an item using the...

PJL7211ViewSonic7

ItemDescription
MY MEMORY
This projector has 4 memories for adjustment data (for all the items of the PICTURE menu).Selecting a function using the ▲/▼ buttons and pressing the ► or ENTER button performs each function.
SAVE- ó SAVE-2 ó SAVE-3 ó SAVE-4
LOAD-4 óLOAD-3 ó LOAD-2 ó LOAD-1
SAVE-1, SAVE-2, SAVE-3, SAVE-4Performing a SAVE function saves the current adjustment data into the memory linked in the number included in the function’s name. • Remember that the current data...

PJL7211ViewSonic8

IMAGE menu
From the IMAGE menu, items shown in the table 
below can be performed.
Select an item using the ▲/▼ cursor buttons, and 
press the ► cursor button or ENTER button to 
execute the item. Then perform it according to the 
following table.
ItemDescription
ASPECT
Using the ▲/▼ buttons switches the mode for aspect ratio. 
For a computer signal
NORMAL ó 4:3 ó 16:9 ó 16:10          
For a video signal or component video signal
4:3 ó 16:9 ó 14:9     
For no signal
4:3 (fixed)
•...

PJL7211ViewSonic9

ItemDescription
H PHASE
Using the ◄/► buttons adjusts the horizontal phase to eliminate flicker.
Right ó Left
• This item can be selected only for a computer signal or a component video signal.
H SIZE
Using the ◄/► buttons adjusts the horizontal size.
Small ó Large
• This item can be selected only for a computer signal.• When this adjustment is excessive, the picture may not be displayed correctly. In such a case, please reset the adjustment by pressing the RESET button on the...

PJL7211ViewSonic30

INPUT menu
From the INPUT menu, items shown in the table 
below can be performed.
Select an item using the ▲/▼ cursor buttons, and 
press the ► cursor button or ENTER button to 
execute the item. Then perform it according to the 
following table.
ItemDescription
PROGRESSIVE
Using the ▲/▼ buttons switches the progress mode.
TV ó FILM ó OFF  
• This function is performed only for the VIDEO input, and for 480i@60 or 576i@50 signal at the COMPUTER IN input.• When the TV or FILM is...

PJL7211ViewSonic3

ItemDescription
VIDEO FORMAT
Using the ◄/► buttons switches the mode for video format.
AUTO  ó  NTSC  ó  PAL  ó  SECAM
      N-PAL ó M-PAL ó NTSC4.43 
• This item is performed only for a video signal from the VIDEO port.• The AUTO mode automatically selects the optimum mode.• The AUTO operation may not work well for some signals. If the picture becomes unstable (e.g. an irregular picture, lack of color), please select the mode according to the input signal.
COMPUTER IN
Use the...

PJL7211ViewSonic3

ItemDescription
RESOLUTION
The resolution for the COMPUTER IN input signals can be set on this projector.
(1)  In the INPUT menu select the RESOLUTION using the ▲/▼ 
buttons and press the ► button. The RESOLUTION menu will be  
displayed.
(2)   In the RESOLUTION menu select the 
resolution you wish to display using the ▲/▼ buttons.  Selecting AUTO will set a resolution appropriate to the input signal.
(3)   Pressing the ► or 
ENTER button when selecting a STANDARD resolution will...

PJL7211ViewSonic33

SETUP menu
From the SETUP menu, items shown in the table 
below can be performed.
Select an item using the ▲/▼ cursor buttons, and 
press the ► cursor button or ENTER button to 
execute the item. Then perform it according to the 
following table.
ItemDescription
KEYSTONE
Using the ◄/► buttons corrects the vertical keystone distortion.
Shrink the bottom of the image ó Shrink the top of the image
• The adjustable range of this function will vary among inputs. For some input, this...

PJL7211ViewSonic34

SCREEN menu
From the SCREEN menu, items shown in the table 
below can be performed.
Select an item using the ▲/▼ cursor buttons, and 
press the ► cursor button or ENTER button to 
execute the item. Then perform it according to the 
following table.
ItemDescription
LANGUAGE
Using the ▲/▼/◄/► buttons switches the OSD (On Screen Display) language.
ENGLISH ó FRANÇAIS ó DEUTSCH ó  ESPAÑOL         (shown in the LANGUAGE dialog)  
Press the ENTER or INPUT button to save the language...

PJL7211ViewSonic35

ItemDescription
MyScreen
This item allows you to capture an image for use as a MyScreen image which can be used as the BLANK screen and START UP screen. Display the image you want to capture before executing the following procedure.
1.  Selecting this item displays a dialog 
titled “MyScreen”. It will ask you if 
you start capturing an image from the current screen.
Please wait for the target image to be displayed, and press the ENTER or INPUT button when the image is displayed. The...