ViewSonic Pjl7211 Projector User Manual

PJL7211ViewSonic6

1.Press ASPECT button on the remote control.   
Each time you press the button, the projector switches the 
mode for aspect ratio in turn. 
Selecting an aspect ratio
● ASPECT button does not work when no proper signal is inputted.
● NORMAL mode keeps the original aspect ratio setting.
1.Press SEARCH button on the remote control.
The projector will start to check its input ports in order, and 
display the image of the proper signal found first.
The projector checks the selected...

PJL7211ViewSonic7

Operating
Adjusting the projector’s elevator
When the place to put the projector is slightly uneven to the left or right, use the 
elevator feet to place the projector horizontally. 
Using the feet can also tilt the projector in order to project at 
a suitable angle to the screen, elevating the front side of the 
projector within 14 degrees.
This projector has 2 elevator feet and 2 elevator buttons. An elevator foot is 
adjustable while pushing the elevator button on the same...

PJL7211ViewSonic8

Operating
1.Press the POSITION button on the remote control when no menu 
is indicated. 
The “POSITION” indication will appear on the screen.
Adjusting the position
2.Use the ▲/▼/◄/► cursor buttons to adjust the picture position.
When you want to reset the operation, press the RESET button 
on the remote control during the operation.
To complete this operation, press the POSITION button again. 
Even if you do not do anything, the dialog will automatically 
disappear after a few...

PJL7211ViewSonic9

Operating
• The zoom level can be finely adjusted. Closely watch the screen to 
find the level you want.
NOTE
1.Press the ON button of MAGNIFY on the remote control.  
The “MAGNIFY” indication will appear on the screen and the 
projector will go into the MAGNIFY mode. When the ON button 
of MAGNIFY is pressed first after the projector is started, the 
picture will be zoomed twice. The indication will disappear in 
several seconds with no operation.
Using the magnify feature
2.Use...

PJL7211ViewSonic0

Operating
1.Press the BLANK button on the remote control.  
The BLANK screen will be displayed instead of the screen of 
input signal. Please refer to the BLANK item in the SCREEN 
menu.
To exit from the BLANK screen and return to the input signal 
screen, press the BLANK button again. 
Temporarily blanking the screen
●  
The projector automatically exits from the BLANK mode when 
some control buttons are pressed.
1.Press the FREEZE button on the remote control.  
The “FREEZE”...

PJL7211ViewSonic

Operating
1.To start the MENU, press the MENU button. The MENU you last used (EASY 
or ADVANCED) will appear. EASY MENU has priority to appear just after 
powered on.
Using the menu function
2.(1)  Use the ▲/▼ cursor buttons to select an item to 
operate. If you want to change it to the ADVANCED 
MENU, select the ADVANCED MENU.
(2)   Use the ◄/► cursor buttons to operate the item.
This projector has the following menus:  
PICTURE, IMAGE, INPUT, SETUP, SCREEN, OPTION, SECURITY...

PJL7211ViewSonic

Operating
Using the menu function (continued)
3.To close the MENU, press the MENU button again or select EXIT and press 
the ◄ cursor button or ENTER button. Even if you do not do anything, the 
dialog will automatically disappear after about 30 seconds.
●  If you want to move the menu position, use the cursor buttons after pressing the 
POSITION button.
●   Some functions cannot be performed when a certain input port is selected, or 
when a certain input signal is...

PJL7211ViewSonic3

EASY MENU
From the EASY MENU, items shown in the table 
below can be performed.
Select an item using the ▲/▼ cursor buttons. Then 
perform it according to the following table.
ItemDescription
ASPECTUsing the ◄/► buttons switches the mode for aspect ratio.See the ASPECT item in IMAGE menu.
KEYSTONEUsing the ◄/► buttons corrects the vertical keystone distortion. See the KEYSTONE item in SETUP menu.
 PICTURE MODE
Using the ◄/► buttons switches the picture mode.
The picture modes are...

PJL7211ViewSonic4

ItemDescription
ECO MODEUsing the ◄/► buttons turns off/on the eco mode.See the ECO MODE item in SETUP menu.
MIRRORUsing the ◄/► buttons switches the mode for mirror status.See the MIRROR item in SETUP menu.
RESET
Performing this item resets all of the EASY MENU items except the FILTER TIME and LANGUAGE.A dialog is displayed for confirmation. Selecting the OK using the ► button performs resetting.
FILTER TIME
The usage time of the air filter is shown in the menu.Performing this...

PJL7211ViewSonic5

PICTURE menu
From the PICTURE menu, items shown in the table 
below can be performed. 
Select an item using the ▲/▼ cursor buttons, and 
press the ► cursor button or ENTER button to 
execute the item. Then perform it according to the 
following table.
ItemDescription
BRIGHTNESSUsing the ◄/► buttons adjusts the brightness.Dark ó Light
CONTRASTUsing the ◄/► buttons adjusts the contrast.Weak ó Strong
GAMMA
Using the ▲/▼ buttons switches the gamma mode.
To adjust CUSTOM
Selecting a...