ViewSonic Pjl7211 Projector User Manual

PJL7211ViewSonic36

ItemDescription
MyScreen Lock
Using the ▲/▼ buttons turns on/off the MyScreen lock function.
ON ó OFF
When the ON is selected, the item MyScreen is locked. Use this function for protecting the current MyScreen.
• This function cannot be selected when the ON is selected to the MyScreen PASSWORD item in the SECURITY menu.
MESSAGE
Using the ▲/▼ buttons turns on/off the message function.
ON ó OFF
When the ON is selected, the following message function works.
“AUTO IN PROGRESS” while...

PJL7211ViewSonic37

ItemDescription
SOURCE NAME
Each input port for this projector can have a name applied to it.
(1)  Use the ▲/▼ buttons on the SCREEN menu to select the 
SOURCE NAME and press the ► or ENTER button.  The SOURCE NAME menu will be displayed.
(2)   Use the ▲/▼ buttons on the SOURCE 
NAME menu to select the port to be named and press the ► button. Right side of the menu is blank until a name is specified. The SOURCE NAME dialog will be displayed.
(3)   The current name will be displayed...

PJL7211ViewSonic38

ItemDescription
C.C.(Closed Caption)
The C.C. is the function that displays a transcript or dialog of the audio portion of a video, files or other presentation or other relevant sounds. It is required to have NTSC format video or 480i@60 format component video source supporting C.C. feature to utilize this function.It may not work properly, depending on equipment or signal source. In this case, please turn off the Closed Caption.
DISPLAY
Select Closed Caption DISPLAY setting from...

PJL7211ViewSonic39

OPTION menu
From the OPTION menu, items shown in the table 
below can be performed.
Select an item using the ▲/▼ cursor buttons, and 
press the ► cursor button or ENTER button to 
execute the item, except for the items LAMP TIME 
and FILTER TIME. Then perform it according to the 
following table
ItemDescription
AUTO SEARCH
Using the ▲/▼ buttons turns on/off the automatic signal search function.
ON ó OFF
When the ON is selected, detecting no signal automatically cycles through input...

PJL7211ViewSonic40

ItemDescription
AUTO OFF
Using the ▲/▼ buttons adjusts the time to count down to automatically turn the projector off.
Long (max. 99 minutes) ó Short (min. 0 minute = DISABLE)
When the time is set to 0, the projector is not turned off automatically.When the time is set to 1 to 99, and when the passed time with no-signal or an unsuitable signal reaches at the set time, the projector lamp will be turned off. If one of the projector’s buttons or the remote control buttons is pressed...

PJL7211ViewSonic4

ItemDescription
MY BUTTON
This item is to assign one of the following functions to the MY BUTTON 1/2 on the remote control.
(1)   Use the ▲/▼ buttons on the MY BUTTON menu to select a 
MY BUTTON - (1/2) and press the ► button to display the MY 
BUTTON setup dialog. 
(2)   Then using the ▲/▼/◄/► buttons sets one of the following 
functions to the chosen button. Press the ENTER or INPUT button to save the setting.
• COMPUTER IN: Sets port to COMPUTER IN.• VIDEO: Sets port to the...

PJL7211ViewSonic4

ItemDescription
SERVICE
Selecting this item displays the SERVICE menu.Select an item using the ▲/▼ buttons, and press the ► button or the ENTER button on the remote control to execute the item.
FAN SPEED
Using the ▲/▼ buttons switches the rotation speed of the cooling fans. The HIGH is the mode for use at highlands etc. Note that the projector is noisier when the HIGH is selected.
HIGH ó NORMAL
AUTO ADJUST
Using the ▲/▼ buttons to select one of the mode. When the DISABLE is...

PJL7211ViewSonic43

ItemDescription
SERVICE(continued)
KEY LOCK
Using the ▲/▼ buttons turns on/off the key lock feature. When ON 
is selected, the buttons on the projector except the STANDBY/ON button are locked.
ON ó OFF
• Please use this function to prevent tampering or accidental operation. This function does not have any effect on the remote control.
REMOTE FREQ.
(1)  Use the ▲/▼ button to change the projector’s remote sensor 
frequency setting.
1:NORMAL ó 2:HIGH
(2)   Use the ◄/► button to change...

PJL7211ViewSonic44

This projector is equipped with security functions.From the SECURITY menu, items shown in the table below can be performed.To use SECURITY menu: User registration is required before using the security functions.
Enter the SECURITY menu
1.  Use the ▲/▼ buttons on the SECURITY menu to select ENTER PASSWORD and press the ► button. The ENTER PASSWORD box will be displayed.  
2.  
Use the ▲/▼/◄/► buttons to enter the registered password. The factory default password is 2578. This password...

PJL7211ViewSonic45

ItemDescription
MyScreen 
PASSWORD
The MyScreen PASSWORD function can be used to prohibit access to the MyScreen function and prevent the currently registered MyScreen image from being overwritten.
1 Turning on the MyScreen PASSWORD1-1  Use the ▲/▼ buttons on the SECURITY menu to select MyScreen PASSWORD and press the ► button to display the MyScreen PASSWORD on/off menu.
1-2   Use the ▲/▼ buttons on the MyScreen 
PASSWORD on/off menu to select ON. The ENTER NEW PASSWORD box (small)...