Home
>
Toshiba
>
Communications System
>
Toshiba Strata Xiie, Strata Xxe Electronic Key Telephone Systems Installation And Maintenance Manual
Toshiba Strata Xiie, Strata Xxe Electronic Key Telephone Systems Installation And Maintenance Manual
Here you can view all the pages of manual Toshiba Strata Xiie, Strata Xxe Electronic Key Telephone Systems Installation And Maintenance Manual. The Toshiba manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 121
PROGRAMMING PROCEDURES SECTION 300-020-300 JULY 1966 TABLE 39 PROGRAM 5XX STATION CLASS OF SERVICE #l 1) Lock in the SET switch on the HCAU. SPKR LED flashes continuously. INT and CO LEDs go on according to present s on or 0 If the LED is already on, depressing its asso- ciated key will turn it off and vice versa. LEDs may be turned off and on until the desired pat- with this program or . . . 6B) Go to Step 2 in another program table . . . or . e . 6C) Transfer data into working memory...
Page 122
PROGRAMMING PROCEDURES SECTION 300-020-300 JULY 1986 TABLE 40 PROGRAM 5#XX STATION CLASS OF SERVICE #2 1) Lock in the SET switch on the HCAU. W/FL LED on. em IS In program mode. grammed.) NOTE: INT and CO LEDs go on according to present For multiple station programming, refer to keys, turn their associate LED is already on, depressing its asso- ed off and on until the desired pat- 6B) Go to Step 2 in gG;h& program table . . . or s . ~ 6C) Transfer data into working memory per -62-
Page 123
PROGRAMMING PROCEDURES SECTION 300-020-300 JULY1986 TABLE 41 PROGRAM 6XX STATION TOLL RESTRICTION CLASSIFICATION 1). Lock in SET switch on the HCAU. SPKR LED flashes continuously. tation programming, refer to Para- INT, CO LEDs go on according to present data. the System Record Sheet. Using the An X on the record sheet means the LED should off, as required. If the LED is already on, depressing its asso- rned off and on until the desired pat- All station 17 LEDs (except MW/FL) go off. this...
Page 124
PROGRAMMING PFjOCEOURES SECTION 300-020-300 JULY 1986 TABLE 42 PROGRAM 6#XX STATION-TO-STATION HUNTING 1) Lock in the SET switch on the HCAU. Station 17 MW/FL LED on. ram defines the station hunt destination. This LEDs as shown below. with this program 6B) Go to Step 2 in gonb%x program table . . . or . . . 6C) Transfer data into working memory per Paragraph 02.06. SET LED goes off. Station 17 MW/FL LED goes off. -64-
Page 125
PRUGRAMMING PROCEDURES SECTION 300-020-300 JULY 1988 TABLE 43 PROGRAM 7XX STATION OUTGOING CALL RESTRICTION 1) Lock in the SET switch on the HCAU. Station 17 MW/FL LED on. as requrred. 0 LED on = Restricted outgoing calls. 0 Each CO key/LED represents itself-that is, if the CO1 .LED is on, then the station being e LED is already on, depressing its asso- ciated key will turn it off and vice versa. LEDs may be turned off and on until the desired pat- 66) Go to Step 2 in another program table...
Page 126
PROGRAMMING PROCEDURES SECTION 300-020-300 JULY 1986 TABLE 44 PROGRAM 8XX CO RINGING ASSIGNMENTS-DAY 1) Lock in the SET switch on the HCAU. W/FL LED on. ystem IS In program mode. grammed.) NOTE: e station to be pro- CO LEDs indicate present data. For multiple station programming, refer to 2) A maximum of eight stations may be assigned to ring for any given CO /inc. If more are assigned, as required. 0 LED on = Restricted outgoing calls. 0 Each CO key/LED represents itself-that is, if the...
Page 127
PROGRAMMING PROCEDURES SECTION .300-020-300 JULY 1986 TABLE 45 PROGRAM 8#XX CO RINGING ASSIGNMENTS-DAY 2 W/FL LED on. I) Lock in the SET switch on the HCAU. ystem IS In program mode. NOTE: CO LEDs indicate present data. For multiple station programming, refer to 2) A maximum of eight stations may be assigned to ring for any given CO line. if more are assigned, as required. 0 LED on = Ring in DAY 2 mode. @ Each CO key/LED represents itself-that is, if the CO1 LED is on, then the station...
Page 128
PROGRAMMING PROCEDURES SECTION 300-020-300 JULY 1986 TABLE 46 PROGRAM SXX CO RINGING ASSIGNMENTS-NITE SET LED on. 1) Lock in the SET switch on the HCAU. Station 17 MW/FL LED on. System is in program mode. 2) Depress the m key on station 17. 3) Dial Ei) 1 Bon the dial pad. (XX = the number of the station to be pro- grammed.) NO TE. Normal functions halt on station 17. SPKR LED steady on. SPKR LED flashes continuously. CO LEDs indicate present data. For multiple station programming, refer...
Page 129
TOSHIBA SYSTEM PRACTICES ELECTRONIC KEY TELEPHONE SYSTEM Strata XII, & XX, SYSTEM RECORD JULY 1986 Strata@ X/I, & XX= SYSTEM RECORD APPENDIX 1 TSD 86-06-06