Toshiba Strata Dk24, Dk56, Dk96 Instruction Manual

FIGURE ‘I-7-ELECTRONIC TELEPHONE WALL 
MOUNTING BASE ROTATION 
3.20 Standard Telephone Connections 
3.21 Standard telephones areconnected to PSTU 
or PESU (via the MDF) with standard twisted-pair 
jacketed telephone cable. Single-pair wiring is 
required for telephone connection (refer to Wiring 
Diagrams, Section 200-096-209, for wiring/inter- 
connecting details). 
I NOTE: 
See Section 200-096-209 for secondarypro- 
tector information. 
3.22 The standard telephone cable’s overall loop 
resistance,...

INSTALLATION-TELEPHONE 
SECTION 200-096-207 
FEBRUARY1991 
Program 29 
l Assigns DSS console’s individual button func- 
tions. 
3.40 HDCB Door Phone/Lock Control Box In- 
stallation 
3.41 
The HDCB Door Phone Control Box sup- 
ports three door phones (MDFB), or two door 
phones and one door lock control. Wiring connec- 
tions for the HDCB are the same as for an elec- 
tronic telephone. 
3.42 The overall combined length of the HDCB 
and MDFB cable run from the KSU to the tele- 
phone must not exceed 1,000...

INSTALLATION-TELEPHONE 
SECTION 200-096-207 
FEBRUARY1991 
1) Remove the screw from the bottom of the 
cover. Detach the cover from the base and 
metal frame. 
2) Position the metal frame and base to the 
mounting surface and secure with two 1 -inch 
pan head wood screws. 
3) Attach cover to the metal frame and base. 
4 DIGITAL TELEPHONE 
UPGRADE OPTIONS 
4.00 The following contains digital telephone in- 
stallation instructions. It includes step-by-step di- 
rections and drawings on how to upgrade...

INSTALLATION-TELEPHONE 
SECTION 200-096-207 
FEBRUARY1991 
TOP ASSEMBLY 
RS-232 (FEMALE) 
DE-25 CONNECTOR 
/ 
-/ TO P2 OF 
BOTTOM 
PC6 
IMPORTANT: DO NOT CONNECT DIU 
CABLES TO HHEU CONNECTOR 
-.- -. DIGITAL TELEPHONE BASE 
FlGURE7-9-PDIU-DI/DIGITALTELEPHONElNSTALLATlON 
NOTE: 
The DIU strap must be replaced if the PDIU- 
DI is removed from the telephone. 
4) Attach the PDIU-DI to the bottom of thedigital 
telephone and secure with the four captive 
screws (Figure 7-l). 
5) Remove the telephone number...

INSTALLATION-TELEPHONE 
SECTION 200-096-207 
FEBRUARY1991 
3) Set the SW601 switch on the HHEU to 
HEADSET for the headset/loud bell applica- 
tion (Figure 7-10). 
4A) Connect the HESC-65A cable to P601 of the 
HHEU if the loud ringing bell option is re- 
quired (see Figure 7-10). 
4B) If the headset receiver is not to receive OCA, 
cut one side of the R607 resistor on the HHEU 
(Figure 7-10) and then remove the resistor to 
eliminate electrical contact. 
5) Position the HHEU PCB on the standoffs 
inside...

INSTALLATION-TELEPHONE 
SECTION 200-096-207 
FEBRUARY1991 
3) Position the DVSU PCB on the standoffs 
(Figure7-12),andsecurewiththefourscrews 
provided. 
4) Connect the DVSU wire plugs to the connec- 
tors labelled DVSU on both of the telephone’s 
PCBs (Figures 7-l 1 and 7-12). 
IMPORTANT NOTE! 
Make sure that the DVSU wire plugs are 
connected to the proper connectors. 
5) Reinstall the telephone base (Figure 7-l), 
and secure it with its four captive screws. 
4.15 Carbon Straps: If a carbon-type...

4.20 Digital Telephone Connections 
4.21 
Wiring Diagrams, Section 200-096-209, 
provide point-to-point MDF wiring diagrams for 
connecting digital telephones, DDSS consoles, 
and PDIU-DSs to STRATA DK systems. Refer to 
Programming Procedures, Section 200-096-300, 
for programming requirements and procedures. 
The following paragraphs provide general re- 
quirements for telephone installation. 
WARNING! 
1. Never install the telephone wiring dur- 
ing a lightning storm. 
2. Never install the telephone...

INSTALLATION-TELEPHONE 
SECTION 200-096-207 
FEBRUARY1991 
Program 29 
l Assigns DDSS console’s individual button func- 
tions. 
4.40 PDIU-DI Connections 
4.41 A digital telephone with an integrated data 
interface unit (PDIU-DI) requires one wire pair and 
one PDKU circuit (See Paragraph 4.20 for digital 
telephonewiring information and Section 200-096- 
208 for instructions on how to connect peripheral 
devices to PDIU-Dls). 
4.50 PDIU-DS Connections 
4.51 The stand-alone data interface (PDIU-DS) is...

TOSHIBASYSTEM PRACTICES 
DIGITALKEYTELEPHONESYSTEMS INSTALLATION-PERIPHERALS 
SECTION 200-096-208 
FEBRUARY1991 
Stra ta@mcr 
RELEASE 1,2, and.3 
INSTALLATION 
CHAPTER EIGHT 
PERIPHERALS INSTALLATION  

INSTALLATION-PERIPHERALS 
SECTION 200-096-208 
FEBRUARY1991 
PARAGRAPH TABLEOFCONTENTS 
SUBJECT . 
PAGE 
1 
2 
2.10 
2.20 
3 
3.10 
3.20 
4 
4.10 
4.20 
5 
5.10 
5.20 
6 
6.00 
6.10 
7 
7.10 
7.20 
8 
8.10 
8.20 
8.30 
9 
9.00 
9.10 
9.20 
10 
11 
12 
12.00 
12.10 
12.20 
12.30 
12.40 
12.50 
12.60 
12.70 
12.80 
13 
13.00 
14 GENERAL ............................................................................................................... 
RESERVE POWER/POWER FAILURE 
OPTIONS.....