Toshiba Satellite Pro Te2000 Manual

							THE
 G
RAND
 TOUR
  2-15 CAUTION: Check the Slim Select Bay indicator when you use the CD-
RW/DVD-ROM drive. Do not press the eject button, disconnect a drive or
turn off the computer while the light is glowing. Doing so could damage
the CD/DVD or the drive.
CD-RW/DVD-ROM drives and media are manufactured according to the specifica-
tions of six marketing regions. When you purchase DVD media, make sure it
matches your drive, otherwise it will not play properly.
Code Region
1 Canada, United States
2 Japan, Europe, South Africa, Middle East
3 Southeast Asia, East Asia
4 Australia, New Zealand, Pacific Islands, Central America, South
America, Caribbean
5 Russia, Indian Subcontinent, Africa, North Korea, Mongolia
6 China
Slim Select Bay HDD adaptor
You can increase your computer’s data storage capacity by installing an optional,
integrated, 2 1/2 HDD in the Slim Select Bay.
Figure 2-12 The Slim Select Bay HDD adaptor
Slim Select Bay modules
RELEASE LATCH 
						

							THE
 G
RAND
 TOUR
Users Manual
2-16
Slim Select Bay 2nd battery pack
An optional battery pack can be installed in the Slim Select Bay to increase the
computer’s battery power and operating time. For details, refer to the documenta-
tion accompanying the secondary battery pack. Refer to Chapter 8, Optional
Devices, for details on installing a Slim Select Bay 2nd battery pack.
Figure 2-13  The Slim Select Bay 2nd battery pack
Weight saver
Installing a weight saver module in the Slim Select Bay lets you reduce the carrying
weight of the computer.
Figure 2-14 The weight saver 
						

							  3-1
GETTING
 S
TARTED
Chapter 3
Getting Started
This chapter provides basic information to get you started using your computer. It
covers the following topics:
❑Setting up your work space — for your health and safety
NOTE: Be sure also to read Instruction Manual for Safety & Comfort. This
guide, which is included with the computer, explains product liability.
❑Opening the display
❑Connecting the AC adaptor
❑Turning on the power
❑Windows
® XP Professional setup
❑Windows
® 2000 setup
❑Turning off the power
❑Restarting the computer
❑Restoring the Windows system
If you are a new user, follow the steps in each section of this chapter as you prepare
to operate your computer.
NOTE: All users should be sure to carefully read the sections Windows 
®
XP Professional setup and Windows® 2000 setup, which describe actions
to take when you turn on the power for the first time. 
						

							3-2
Users Manual
GETTING
 S
TARTED
Setting up your work space
Establishing a comfortable work site is important for you and your computer.
A poor work environment or stressful work habits can result in discomfort or
serious injury from repetitive strain to your hands, wrists or other joints.
Proper ambient conditions should also be maintained for the computer’s
operation. This section discusses the following topics:
❑ ❑❑ ❑
❑General conditions
❑ ❑❑ ❑
❑Placement of the computer and peripheral devices
❑ ❑❑ ❑
❑Seating and posture
❑ ❑❑ ❑
❑Lighting
❑ ❑❑ ❑
❑Work habits
General conditions
In general, if you are comfortable, so is your computer, but read the following
to make sure your work site provides a proper environment.
❑ ❑❑ ❑
❑Make sure there is adequate space around the computer for proper
ventilation.
❑ ❑❑ ❑
❑Make sure the AC power cord connects to an outlet that is close to the
computer and easily accessible.
❑ ❑❑ ❑
❑The temperature should be 5 to 35 degrees Centigrade (41 to 95 degrees
Fahrenheit) and the relative humidity should be 20 to 80 percent.
❑ ❑❑ ❑
❑Avoid areas where rapid or extreme changes in temperature or humidity
may occur.
❑ ❑❑ ❑
❑Keep the computer free of dust, moisture, and exposure to direct sunlight.
❑ ❑❑ ❑
❑Keep the computer away from heat sources, such as electric heaters.
❑ ❑❑ ❑
❑Do not use the computer near liquids or corrosive chemicals.
❑ ❑❑ ❑
❑Do not place the computer near objects that create strong magnetic fields
(e.g., stereo speakers).
❑ ❑❑ ❑
❑Do not operate the computer in close proximity to a mobile phone.
Placement of computer
Position the computer and peripheral devices to provide comfort and safety.
❑ ❑❑ ❑
❑Set the computer on a flat surface at a comfortable height and distance.
The display should be no higher than eye level to avoid eye strain. 
						

							  3-3
GETTING
 S
TARTED
❑ ❑❑ ❑
❑Place the computer so that it is directly in front of you when you work and
make sure you have adequate space to easily operate other devices.
❑ ❑❑ ❑
❑Allow adequate space behind the computer to let you freely adjust the
display. The display should be angled to reduce glare and maximize
visibility.
❑ ❑❑ ❑
❑If you use a paper holder, set it at about the same height and distance as
the computer.
Seating and posture
The height of your chair in relation to the computer and keyboard as well as
the support it gives your body are primary factors in reducing work strain.
Refer to the following tips and to figure 3-1.
Figure 3-1 Posture and positioning of the computer
❑ ❑❑ ❑
❑Place your chair so that the keyboard is at or slightly below the level of
your elbow. You should be able to type comfortably with your shoulders
relaxed.
❑ ❑❑ ❑
❑Your knees should be slightly higher than your hips. If necessary, use a
foot rest to raise the level of your knees to ease pressure on the back of
your thighs.
❑ ❑❑ ❑
❑Adjust the back of your chair so it supports the lower curve of your spine.
❑ ❑❑ ❑
❑Sit straight so that your knees, hips and elbows form approximately 90
degree angles when you work. Do not slump forward or lean back too far.
BELOW EYE LEVEL
FOOT REST90O ANGLES 
						

							3-4
Users Manual
GETTING
 S
TARTED
Lighting
Proper lighting can improve legibility of the display and reduce eye strain.
❑ ❑❑ ❑
❑Position the computer so that sunlight or bright indoor lighting does not
reflect off the screen. Use tinted windows, shades or other screen to
eliminate sun glare.
❑ ❑❑ ❑
❑Avoid placing the computer in front of bright light that could shine
directly in your eyes.
❑ ❑❑ ❑
❑If possible, use soft, indirect lighting in your computer work area. Use a
lamp to illuminate your documents or desk, but be sure to position the
lamp so that it does not reflect off the display or shine in your eyes.
Work habits
A key to avoiding discomfort or injury from repetitive strain is to vary your
activities. If possible, schedule a variety of tasks into your work day. If you
must spend long periods at the computer, finding ways to break up the routine
can reduce stress and improve your efficiency.
❑ ❑❑ ❑
❑Sit in a relaxed posture. Good positioning of your chair and equipment as
described earlier can reduce tension in your shoulders or neck and ease
back strain.
❑ ❑❑ ❑
❑Vary your posture frequently.
❑ ❑❑ ❑
❑Occasionally stand up and stretch or exercise briefly.
❑ ❑❑ ❑
❑Exercise and stretch your wrists and hands a number of times during the
day.
❑ ❑❑ ❑
❑Frequently, look away from the computer and focus your eyes on a
distant object for several seconds, for example 30 seconds every 15
minutes.
❑ ❑❑ ❑
❑Take frequent short breaks instead of one or two long breaks, for
example, two or three minutes every half hour.
❑ ❑❑ ❑
❑Have your eyes examined regularly and visit a doctor promptly, if you
suspect you might be suffering from a repetitive strain injury.
A number of books are available on ergonomics and repetitive strain injury or
repetitive stress syndrome. For more information on these topics or for
pointers on exercises for such stress points as hands and wrists, please check
with your library or book vendor. Also refer to the computer’s Instruction
Manual for Safety & Comfort. 
						

							  3-5
GETTING
 S
TARTED
Opening the display
The display panel can be rotated in a wide range of angles for optimal viewing.
1. Slide the display latch on the front of the computer to the right to unlatch
the display panel.
2. Lift the panel up and adjust it to the best viewing angle for you.
NOTE: When you open the display, hold it with both hands and lift up
slowly.
Figure 3-2 Opening the display panel
Connecting the AC adaptor
Attach the AC adaptor when you need to charge the battery or you want to
operate from AC power. It is also the fastest way to get started, because the
battery pack will need to be charged before you can operate from battery
power.
The AC adaptor can be connected to any power source supplying from 100 to
240 volts and 50 or 60 hertz. For details on using the AC adaptor to charge the
battery pack, refer to Chapter 6, Power and Power-Up Modes.
CAUTION: Use of the wrong adaptor could damage your computer.
TOSHIBA assumes no liability for any damage in such case. The current
rating for the computer is 5.0 amperes. 
						

							3-6
Users Manual
GETTING
 S
TARTED
1. Connect the power cord to the AC adaptor.
Figure 3-3  Connecting the power cord to the AC adaptor
2. Connect the AC adaptor’s DC output plug to the DC IN port on the back
side of the computer.
Figure 3-4  Connecting the adaptor to the computer
3. Plug the power cord into a live wall outlet. The Battery and DC IN indicator
on the front of the computer should glow. 
						

							  3-7
GETTING
 S
TARTED
Turning on the power
This section describes how to turn on the power.
NOTE: After you turn on the power for the first time, do not turn it off
until you have set up the operating system (OS) and the OS has started
up.
1. If the external diskette drive is connected, make sure it is empty. If a diskette is
in the drive, press the eject button and remove the diskette.
2. Open the display panel.
3. Press and hold the button for two or three seconds.6. Enable the desired
Hibernation settings for When I press the power button and When I close
the lid.
Figure 3-5 Turning on the power 
						

							3-8
Users Manual
GETTING
 S
TARTED
Windows XP Professional/2000 setup
When you first turn on the power, the computer’s initial screen is the
Microsoft Windows  XP Professional Startup Screen Logo.
Follow the on-screen directions.
If you ordered Windows 2000, the operating system is not preinstalled. Follow
the steps below to install the Windows 2000 and TOSHIBA utilities.
1. Turn on the computer, load the Product Recovery CD-ROM in the drive
and turn off the power.
2. Hold down the C key and turn on the power. When In Touch with
Tomorrow TOSHIBA appears, release the C key.
3. Follow the on-screen instructions.
NOTE: You can get the Product key from a seal on the bottom of the
computer (Windows 2000 only).
Windows 98 setup
When you first turn on the power, the computer’s initial screen is the
Microsoft Windows 98 Startup Screen Logo. Follow the on-screen directions
for each screen. During setup, you can click the Back button to return to the
previous screen.
Be sure to read the Windows End User License Agreement display
carefully.
NOTE: Be sure to read the License Agreement carefully.
Turning off the power
The power can be turned off in one of the following modes: Shut down (Boot),
Hibernation or Standby mode.
Shut Down mode (Boot mode)
IWhen you turn off the power in Shut Down mode, no data is saved and the
computer will boot to the operating system’s main screen.
1. If you have entered data, save it to the hard disk or to a diskette.