Toshiba Perception 1 2 User Manual

CALL FORWARDING 3A. Press them button. 
Call Forwarding enables you to direct your station’s incoming calls to 
another station. There are four types of call forwarding available: 
n Call Forward All Calls 
W Call Forward Busy 
W Call Forward No Answer 
n Call Forward Busy/No Answer 
In addition, there are two types of Call Forwarding System that apply to 
calls from DID, TIE, and CCSA trunks. These types of Call Forwarding 
can only be directed to an attendant console: 
W Call Forward Busy (System/DID)...

16. Lift the handset. 
26. Dial the access code flu B 
-. 
36. Dial the number to which calls 
are to be forwarded. 
40. Dial a. 
To Use Call Forward Busy 
(SYSTEM/DID : 
IA. Press the 
bl : button. 
2A. Dial a (the only number to 
which calls can be forwarded). 
3A. Press them button. 
16. Lift the handset. 
28. Dial the access code fl[ B 
38. Dial a. 
48. Dial 1. 
To Use Call Forward Busy/No 
Answer (SYSTEM/DID): 
1A. Press them button. 
2A. Dial 1 (the only number to 
which calls can be forwarded)....

To Use Call PickLID G~OUD: 
1. 
2. Lift the handset. . You will hear dial tone. 
Press the m button or dial You will be connected to any call that is ringing at any station in your 
the access code a B) group. 
To lnltlate a Conference: 
1. Press the m button. 
2. Dial the desired number. 
3. Press them button when The DN LED indication will change from On-hold to In-use status. 
the new party answers. A 3-party conference will be established. 
To Return to Your Orlginal 
Connection: 
I. Press the...

28. Dial the access code fl B B 
38. Hang up. Do Not Disturb will be canceled. 
LEAST COST ROUTING 
NOTES: 
1. Outgoing calls and features will still function white the telephone is 
in the DND mode; however, the telephone will appear to be busy to Your system will automatically select the least costly route (trunk group) 
any incoming calls. for the call that you want to make. If that route is busy, the next best 
route will be selected (if permitted by your Class of Service). 
2. The activation of Do...

To Establish Off-hook Call 
Announce from a Statlon: 
1. Lift the handset. 
2. Dial the directory number of 
the desired station. 
3A. If the calling station has an 
automatic OCA feature, the 
called station will hear warning 
lone and you will hear 
ringback tone. 
38. If the calling station has a 
manual OCA feature, there are You will hear dial tone. 
The system reads call forwards and station hunting data, to see if they 
are set, since those features take precedence over OCA. 
The OCA LED will...

To Park a Call: 
1. Press theI m button, or 
press the B m button 
and dial the access code 4 
IEbb, 
-. 
2. Hang up or dial another call. 
To Reconnect a Parked Call: 
IA. Lifl the handset. 
or 
16. Press them button (this is 
necessary only for calls which 
are parked on a DN other than 
the primary DN). 
2A. Press them button or dial 
the access code (00 B . 
To Hold a Call: 
1. Press the w button. 
2. Hang up. 
To Reconnect a Held Call: 
1. Lift the handset. 
CALL HOLD AND TRANSFER 
CALL HOLDING...

To Accept the Waltlng Call While 
Holding the Existing Call: 
1. Press them button, or 
press the B button 
and dial the access code 4 0 The CWT LED will light steadily, the DN LED will indicate the On-hold 
status, and you will be connected to the waiting call. 
To Return to the Orlglnal Call: 
1. Press the appropriate 
q button. 
To Disconnect One Call and 
Remain Connected to the Other 
Call: 
1. Hang up while connected to 
the call that you want to 
terminate. 
2. Press the 
q button. 
To Accept a...

To Obtain a Message and 
Cancel Message Waltlng at the 
Station: 
1. Lift the handset. 
2A. Press them button. 
. . or . . . 
28. Dial Message Center number. 
3. Collect your message(s). 
4. Hangup. 
To Cancel Message Waking at 
the Statlon: 
1A. While the lele hone is idle, 
press the 
di button. 
. . . or . . . 
1 B. Lift the handset. 
28. Dial the access code fl B 
-. 
38. Hang up. MESSAGE WAITING 
Message Waiting allows the attendant or alternative Message Center to 
inform a station user that a...

3. Dial the desired paging group 
number (2 - 17). 
4. Announce your page. Speak slowly and distinctly, and repeat your message. 
To Page All Internal Groups: 
1. Lift the handset. You will hear dial tone. 
2A. Press the m button and dial You will now be connected to the internal all-paging group. 
i (the Internal All Paging 
Group number). 
. . . or . 
28. Dial the access code fl@ D 
__ and dial 1. You will be connected to the internal all-paging zone. 
. . or . . . 
2C. To page the Expanded Internal...

3. Dial your mailbox number. 
4. Press ihe m button (or 1 if 
access code is used). 
To Cancel Call Forvfard to Voice 
Mail: 
1. Press them button or dial 
the access code (10 b 
To Program Your Message 
Button to Retrieve Messages 
Automatically: 
1. Press the m button. 
2. Dial your Voice Mail number. 
3. Dial your mailbox number and 
pass code. 
4. Press them button. 
5. To respond, press them 
button. The CFD LED will light steadily, and the call will be forwarded to your 
mailbox. 
The call forward...