Toshiba E Studio 200S User Manual

1
2
3
4
5
6
7
9
10
11
128
2
1. TOSHIBA QUALITY IS SECOND TO NONE (Cont.)
General
Toners
Optimum Image Quality
Genuine Toshiba toners use ultra-fine quality materials and precisely controlled parameters so that
Toshiba copiers can continually generate sharp, high-quality image output.
Cost Advantage
Genuine Toshiba toners mean value. They are designed to use only the proper amount of toner enabling
the machine to continue to operate until all the toner has been used.  In this way you get the full value...

8-9
1
2
3
4
5
6
7
9
10
11
128
7. SPEAKER TEST
The speaker test checks speaker operation by changing the volume output from the speaker.
1
Press the  key to enter the program menu.
2
Select “05.TEST MODE” and press the  key.
3
Select “02.INDIVIDUAL TEST” and press the  key.
4
Select “05.SPEAKER TEST” and press the  key.
5
Select the speaker volume level by using the 
key or  key.
 Level 0 produces on sound, and Level 7 the maximum
volume. Speaker sound is output at the volume level
selected. Check that...

1
2
3
4
5
6
7
9
10
11
128
2
1. TOSHIBA QUALITY IS SECOND TO NONE (Cont.)
General
Toners
Optimum Image Quality
Genuine Toshiba toners use ultra-fine quality materials and precisely controlled parameters so that
Toshiba copiers can continually generate sharp, high-quality image output.
Cost Advantage
Genuine Toshiba toners mean value. They are designed to use only the proper amount of toner enabling
the machine to continue to operate until all the toner has been used.  In this way you get the full value...

8-11
1
2
3
4
5
6
7
9
10
11
128
9. TEST  PRINT
The test print checks the print function by printing a test pattern.
1
Press the  key to enter the program menu.
2
Select “05.TEST MODE” and press the  key.
3
Select “02.INDIVIDUAL TEST” and press the  key.
4
Select “07.PRINT TEST” and press the  key.
 The PRINT TEST pattern is printed out and the following
message appears:
 If the result of the PRINT test is judged to be NG, call your
service representative.
Printing accepted
PROGRAM
01.DEFAULT SETTINGS...

1
2
3
4
5
6
7
9
10
11
128
2
1. TOSHIBA QUALITY IS SECOND TO NONE (Cont.)
General
Toners
Optimum Image Quality
Genuine Toshiba toners use ultra-fine quality materials and precisely controlled parameters so that
Toshiba copiers can continually generate sharp, high-quality image output.
Cost Advantage
Genuine Toshiba toners mean value. They are designed to use only the proper amount of toner enabling
the machine to continue to operate until all the toner has been used.  In this way you get the full value...

9-1
1
2
3
4
5
6
7
9
10
11
128
9. MAINTENANCE
1. DAILY INSPECTION ....................................................................................................... 9-2
2. CLEANING THE WIRE ................................................................................................... 9-3
3. SIMPLE TROUBLESHOOTING ...................................................................................... 9-5
Downloaded From ManualsPrinter.com Manuals 

1
2
3
4
5
6
7
9
10
11
128
1-2BEFORE MAKING COPIES
1. DESCRIPTION OF THE OPTIONAL EQUIPMENT
 Automatic document feeder (MR-2012) Reversing automatic document feeder (MR-3011)
 Stapler (KK-1600)
 Job separator (MJ-5001) Offset tray (MJ-5002)
 Automatic duplexing unit (MD-0101)
 Stack feed bypass (MY-1016)
 Paper feed unit (MY-1015)
 Paper feed pedestal (KD-1009)
e-STUDIO16
e-STUDIO20/25
 Stapler (KK-1600)
 Automatic duplexing unit
(MD-0101)
 Stack feed bypass
(MY-1016)
 Automatic document feeder (MR-2012)...

9-3
1
2
3
4
5
6
7
9
10
11
128
2. CLEANING THE WIRE
When the black lines in the direction of paper feed are generated on the copy, clean the charger wire.
BE SURE TO TURN OFF THE POWER before cleaning the charger wire.
Cleaning the charger wire
1
Open the front cover.
2
Clean the charger.
 Hold the cleaning knob, pull it out slowly and fully to the
front and then push it back to the inside carefully and
completely. Repeat this 2 or 3 times.
Note
Make sure that the charger knob is pushed in fully inside....

1
2
3
4
5
6
7
9
10
11
128
1-2BEFORE MAKING COPIES
1. DESCRIPTION OF THE OPTIONAL EQUIPMENT
 Automatic document feeder (MR-2012) Reversing automatic document feeder (MR-3011)
 Stapler (KK-1600)
 Job separator (MJ-5001) Offset tray (MJ-5002)
 Automatic duplexing unit (MD-0101)
 Stack feed bypass (MY-1016)
 Paper feed unit (MY-1015)
 Paper feed pedestal (KD-1009)
e-STUDIO16
e-STUDIO20/25
 Stapler (KK-1600)
 Automatic duplexing unit
(MD-0101)
 Stack feed bypass
(MY-1016)
 Automatic document feeder (MR-2012)...

9-5
1
2
3
4
5
6
7
9
10
11
128
3. SIMPLE TROUBLESHOOTING
Countermeasure
Press any key except for the 
 key.
(It takes a while until the copier becomes
ready.)
Input the correct department code.
Wait until the copier becomes ready.
Reference page
_
1-13
1-10
Items to be checked
Is the copier in the Energy
Saving mode?
Is a department code required?
Is the code correct?
Is the “Warming up” message
displayed? Check the following items and, if the problem still occurs, call for service.
Copier does not start...