Toshiba E Studio 200S User Manual

1
2
3
4
5
6
7
9
10
11
128
1-2BEFORE MAKING COPIES
1. DESCRIPTION OF THE OPTIONAL EQUIPMENT
 A Re
 Stapler \(KK-1600\)
 Job separ Offset tr
 A
 Stac
 P
 P
e-STUDIO16
e-STUDIO20/25
 Stapler \(KK-1600\)
 A
\(MD-0101\)
 Stac
\(MY
 A
 Re
 Finisher including 
br
\(e-STUDIO20/25 only\)
 P
Large Capacity F
 \(KD-1010\)**
\(e-STUDIO20/25 only\)
*
*
Furoption f\) can be installed in KD-
1009.
Downloaded From ManualsPrinter.com Manuals
BEFORE MAKING COPIES
Control Panel
IMAGE MODE
Y
selected image mode illuminates...

7-31
1
2
3
4
5
6
7
9
10
11
128
When the message display shows the following message, copying cannot be performed any longer.
8. CALLING FOR SERVICE
The telephone number of your service technician will be displayed (if pre-programmed).
Note the phone number, then turn the power off and immediately call for service.
Note
Since a heater is used to fix toner images to the copy paper, a safety circuit is incorporated in the
copier. After you turn on the power switch, if a cer tain temperature is not attained...

1
2
3
4
5
6
7
9
10
11
128
1-2BEFORE MAKING COPIES
1. DESCRIPTION OF THE OPTIONAL EQUIPMENT
 A Re
 Stapler \(KK-1600\)
 Job separ Offset tr
 A
 Stac
 P
 P
e-STUDIO16
e-STUDIO20/25
 Stapler \(KK-1600\)
 A
\(MD-0101\)
 Stac
\(MY
 A
 Re
 Finisher including 
br
\(e-STUDIO20/25 only\)
 P
Large Capacity F
 \(KD-1010\)**
\(e-STUDIO20/25 only\)
*
*
Furoption f\) can be installed in KD-
1009.
Downloaded From ManualsPrinter.com Manuals
BEFORE MAKING COPIES
Control Panel
IMAGE MODE
Y
selected image mode illuminates...

8-1
1
2
3
4
5
6
7
9
10
11
128
8. USER TEST MODE
1. AUTOMATIC TEST  MODE ............................................................................................. 8-2
AUTO TEST .................................................................................................................... 8-2
2. INDIVIDUAL TEST  MODE .............................................................................................. 8-3
INDIVIDUAL TEST Summary...

1
2
3
4
5
6
7
9
10
11
128
2
1. TOSHIBA QUALITY IS SECOND TO NONE (Cont.)
General
Toners
Optimum Image Quality
Genuine Toshiba toners use ultra-fine quality materials and precisely controlled parameters so that
Toshiba copiers can continually generate sharp, high-quality image output.
Cost Advantage
Genuine Toshiba toners mean value. They are designed to use only the proper amount of toner enabling
the machine to continue to operate until all the toner has been used.  In this way you get the full value...

8-3
1
2
3
4
5
6
7
9
10
11
128
2. INDIVIDUAL TEST MODE
INDIVIDUAL TEST  Summary
In INDIVIDUAL TEST mode, you can perform specific tests on this copier.
1
Press the  key to enter the program menu.
2
Select “05.TEST MODE” and press the  key.
3
Select “02.INDIVIDUAL TEST” and press the  key.
PROGRAM
01.DEFAULT SETTINGS
02.LISTS
03.INITIAL SETUP
04.MENU LIST
05.TEST MODE
TEST MODE
01.AUTO TEST
02.INDIVIDUAL TEST
03.TEST RESULT LIST
INDIVIDUAL TEST
01.ADF TEST
02.KEY TEST
03.LED TEST
04.LCD TEST
05.SPEAKER...

1
2
3
4
5
6
7
9
10
11
128
2
1. TOSHIBA QUALITY IS SECOND TO NONE (Cont.)
General
Toners
Optimum Image Quality
Genuine Toshiba toners use ultra-fine quality materials and precisely controlled parameters so that
Toshiba copiers can continually generate sharp, high-quality image output.
Cost Advantage
Genuine Toshiba toners mean value. They are designed to use only the proper amount of toner enabling
the machine to continue to operate until all the toner has been used.  In this way you get the full value...

8-5
1
2
3
4
5
6
7
9
10
11
1287
To continue the ADF test, press  key, and then
repeat Steps 5 to 8.  To end the ADF test, press the
 key.
8
If the number of documents loaded is consistent with
the number of documents unload, select “1.YES” and
press the 
 key.
If the documents are not fed properly (even once),
select “2.NO” and press the 
 key.
 The results of the ADF test can be confirmed with the self
test report. 
 Page 8-12
 If the result of the ADF test is judged to be NG, call your
service...

1
2
3
4
5
6
7
9
10
11
128
2
1. TOSHIBA QUALITY IS SECOND TO NONE (Cont.)
General
Toners
Optimum Image Quality
Genuine Toshiba toners use ultra-fine quality materials and precisely controlled parameters so that
Toshiba copiers can continually generate sharp, high-quality image output.
Cost Advantage
Genuine Toshiba toners mean value. They are designed to use only the proper amount of toner enabling
the machine to continue to operate until all the toner has been used.  In this way you get the full value...

8-7
1
2
3
4
5
6
7
9
10
11
128
5. LED TEST
The LED test checks LED operation by lighting all the LEDs on the control panel.
1
Press the  key to enter the program menu.
2
Select “05.TEST MODE” and press the  key.
3
Select “02.INDIVIDUAL TEST” and press the  key.
4
Select “03.LED TEST” and press the  key.
5
Visually check that all the LEDs are on. After
checking, press 
 key.
6
If all the LEDs turned on, select the “1.OK” and press
the 
 key.
If even one LED did not light, select the “2.NG” and
press the...