Toshiba E Studio 200S User Manual

1
2
3
4
5
6
7
9
10
11
128
1-2BEFORE MAKING COPIES
1. DESCRIPTION OF THE OPTIONAL EQUIPMENT
 Automatic document feeder (MR-2012) Reversing automatic document feeder (MR-3011)
 Stapler (KK-1600)
 Job separator (MJ-5001) Offset tray (MJ-5002)
 Automatic duplexing unit (MD-0101)
 Stack feed bypass (MY-1016)
 Paper feed unit (MY-1015)
 Paper feed pedestal (KD-1009)
e-STUDIO16
e-STUDIO20/25
 Stapler (KK-1600)
 Automatic duplexing unit
(MD-0101)
 Stack feed bypass
(MY-1016)
 Automatic document feeder (MR-2012)...

7-11
1
2
3
4
5
6
7
9
10
11
128
Replacing Ozone Filter
The Ozone Filter should be replaced when the Process Unit is replaced.
A new Ozone Filter has been provided with the Process Unit.
Remove the old Ozone Filter from the copier.  Then, install the
new Ozone Filter into the copier.
Note
Discard the used Ozone Filter properly.
Downloaded From ManualsPrinter.com Manuals 

1
2
3
4
5
6
7
9
10
11
128
1-2BEFORE MAKING COPIES
1. DESCRIPTION OF THE OPTIONAL EQUIPMENT
 Automatic document feeder (MR-2012) Reversing automatic document feeder (MR-3011)
 Stapler (KK-1600)
 Job separator (MJ-5001) Offset tray (MJ-5002)
 Automatic duplexing unit (MD-0101)
 Stack feed bypass (MY-1016)
 Paper feed unit (MY-1015)
 Paper feed pedestal (KD-1009)
e-STUDIO16
e-STUDIO20/25
 Stapler (KK-1600)
 Automatic duplexing unit
(MD-0101)
 Stack feed bypass
(MY-1016)
 Automatic document feeder (MR-2012)...

7-13
1
2
3
4
5
6
7
9
10
11
1282
Rotate the blue knob on the side in the direction of
the arrow and remove any misfed originals.
3
Lift the blue handles on the internal paper guide
assembly and pivot the assembly to the right.
4
Rotate the blue knob on the side to remove any
misfed originals. Then return the paper guide
assembly to its normal position.
By rotating the knob in the reverse direction of the arrow,
you can also remove misfed originals from the under side of
the reversing automatic document...

1
2
3
4
5
6
7
9
10
11
128
1-2BEFORE MAKING COPIES
1. DESCRIPTION OF THE OPTIONAL EQUIPMENT
 Automatic document feeder (MR-2012) Reversing automatic document feeder (MR-3011)
 Stapler (KK-1600)
 Job separator (MJ-5001) Offset tray (MJ-5002)
 Automatic duplexing unit (MD-0101)
 Stack feed bypass (MY-1016)
 Paper feed unit (MY-1015)
 Paper feed pedestal (KD-1009)
e-STUDIO16
e-STUDIO20/25
 Stapler (KK-1600)
 Automatic duplexing unit
(MD-0101)
 Stack feed bypass
(MY-1016)
 Automatic document feeder (MR-2012)...

7-15
1
2
3
4
5
6
7
9
10
11
1289
Remove any misfed originals.  Then close the access
panel.
1
Open the side cover.  This cover is located below
the optional duplex unit and optional bypass unit (if
installed).Paper Misfeeds in Cassette 2 (optional)
2
Remove any misfed paper.  Then close the cover.
Downloaded From ManualsPrinter.com Manuals 

1
2
3
4
5
6
7
9
10
11
128
1-2BEFORE MAKING COPIES
1. DESCRIPTION OF THE OPTIONAL EQUIPMENT
 A Re
 Stapler \(KK-1600\)
 Job separ Offset tr
 A
 Stac
 P
 P
e-STUDIO16
e-STUDIO20/25
 Stapler \(KK-1600\)
 A
\(MD-0101\)
 Stac
\(MY
 A
 Re
 Finisher including 
br
\(e-STUDIO20/25 only\)
 P
Large Capacity F
 \(KD-1010\)**
\(e-STUDIO20/25 only\)
*
*
Furoption f\) can be installed in KD-
1009.
Downloaded From ManualsPrinter.com Manuals
BEFORE MAKING COPIES
Control Panel
IMAGE MODE
Y
selected image mode illuminates...

7-17
1
2
3
4
5
6
7
9
10
11
128
1
Make sure that the stack feed bypass is opened (if
installed). Then lift the handle of the automatic
duplexing unit to open it.
2
Open the paper guide. Paper Misfeeds in the Automatic Duplexing Unit
(optional)
3
Remove any misfed paper.  Then lower the paper
guide and latch the duplexer into position.
1
Remove the misfed paper from the bypass guide.
Reset the paper on the bypass tray.
Paper Misfeeds on the Bypass Guide (optional)
Downloaded From ManualsPrinter.com Manuals 

1
2
3
4
5
6
7
9
10
11
128
1-2BEFORE MAKING COPIES
1. DESCRIPTION OF THE OPTIONAL EQUIPMENT
 Automatic document feeder (MR-2012) Reversing automatic document feeder (MR-3011)
 Stapler (KK-1600)
 Job separator (MJ-5001) Offset tray (MJ-5002)
 Automatic duplexing unit (MD-0101)
 Stack feed bypass (MY-1016)
 Paper feed unit (MY-1015)
 Paper feed pedestal (KD-1009)
e-STUDIO16
e-STUDIO20/25
 Stapler (KK-1600)
 Automatic duplexing unit
(MD-0101)
 Stack feed bypass
(MY-1016)
 Automatic document feeder (MR-2012)...

7-19
1
2
3
4
5
6
7
9
10
11
128
Paper Misfeeds in the Fuser area
1
Making sure that the stack feed bypass and the
automatic duplexing unit are opened, open the side
cover.
2
Loosen the two blue screws fixing the fuser cover
and open the fuser cover by holding the blue felt
part.
Caution
As the Fuser Section is heated, pay special attention when
handling it. If hot, allow the fuser to cool prior to touching.
3
Pull out the part of the paper jammed inside the fuser
unit with the co-packed jam clearance...