Toshiba Dvr610 User Manual

							Downloaded from www.Manualslib.com manuals search engine 61EN61EN
Disc 
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
VCR Function
Others
SPECIAL PLAYBACK
Chasing Playback during Recording
Note
•  Playback image may freeze momentarily using this 
function.
However, this does not affect the recording.
•  The 2x fast forward playback is not available.
•  [REC  I] is not available during this function.
•  You must cancel this function first by pressing  [STOP C] once. Then you can use [REC I]  to use 
OTR (one-touch timer recording) function or change 
recording time for the OTR.
•  “Wait for a moment.” will be displayed on the screen  if you press [PLAY  B] before 1 minute of recording.
•  This function is available only when you are 
recording on a DVD-RW in VR mode, with the 
recording mode LP, EP or SLP.
You can play back the already recorded part of the 
currently recording program without waiting for the 
recording to the end. This function works from 1 
minute after the start of the recording.
1) During recording, press [PLAY B].
Playback will start from the beginning of the program 
that you are currently recording.
Screen for the current playback:
1/   5 1/   50:01:00 / 1:23:45-RWVRORG
If you play back the fast forward playback and the 
playback reaches the scene recorded 1 minute before, 
the forwarding playback will automatically return to 
the normal playback.
2) Press  [STOP  C] once to stop playback.
The resume message will appear.
Screen for the current recording:
L1
551:23:45
LP 1:01Resume ON
-RWVRORG
To stop recording, press [STOP  C] again.
To cancel the resume, press [STOP  C] again.
 
Using [TIME SLIP] ...
With [TIME SLIP], even if you leave your couch while 
you are watching TV through this unit, you can come 
back and watch rest of the program from right where 
you left at any convenient time with just one button. 
Please make sure to put VR mode DVD-RW disc, and set 
the recording mode to LP, EP or SLP.
1) While viewing a TV broadcast via this unit, press  [TIME SLIP].
This unit start to record the TV broadcast.
2) Press [TIME SLIP] again. Playback will start from the point at which you press 
[TIME SLIP] first while recording continues.
•  While viewing the recorded content, you can pause and resume the playback by pressing [TIME SLIP].
3) Press  [STOP  C] once to stop playback.
To stop recording, press [STOP  C] again.
To cancel the resume, press [STOP  C] again.
E9KGAUD_D-VR610KU_EN.indd   61 E9KGAUD_D-VR610KU_EN.indd   61 2007/12/18   17:10:47
2007/12/18   17:10:47  
						

							Downloaded from www.Manualslib.com manuals search engine 62 EN62 EN
You can also play back a recorded title during current 
recording or the timer recording on the same disc.
1) During recording, press [DISPLAY].Screen for the current recording:
L1
311:23:45-RWVRORG
2) Select  icon using [{ / B], then press [ENTER].
The title number next to 
 will be highlighted.
Title:
Enter a desired title number to search using
[K / L] or [the Number buttons], then press 
[ENTER].
Selected title playback will start.
Chapter:
To move to 
 for chapter, press [B].
Enter a desired chapter number to search using 
[K / L] or [the Number buttons], then press 
[ENTER].
Selected chapter playback will start.
If you play back the currently recording program and the 
playback reaches the scene recorded 1 minute before, 
the forwarding playback will automatically return to the 
normal playback.
Simultaneous Playback and Recording
SPECIAL PLAYBACK
3) Press  [STOP  C] once to stop playback.
The resume message will appear.
Screen for the current recording:
 
L1
311:30:25
LP 1:01Resume ON
-RWVRORG
To stop recording, press [STOP  C] again. 
To cancel the resume, press [STOP  C] again.
Note
•  Playback image may freeze momentarily using this 
function.
However, this does not affect the recording.
•  The 2x fast forward playback is not available.
•  This function is available only when you are 
recording on a DVD-RW in VR mode, with the 
recording mode LP, EP or SLP.
•  Only the titles (chapters) in the original can be  selected.
You cannot select titles from the title list.
•  When you stop the playback after the timer  recording is completed, the unit will be switched to 
the timer standby mode if another program has been 
set (refer to “Hints for Timer Recording” on page 41).
E9KGAUD_D-VR610KU_EN.indd   62 E9KGAUD_D-VR610KU_EN.indd   62 2007/12/18   17:10:47
2007/12/18   17:10:47  
						

							Downloaded from www.Manualslib.com manuals search engine 63EN63EN
Disc 
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
VCR Function
Others
SEARCH
Using [SKIP j ] / [SKIP i ]
Press [DVD] first.
1) During playback, press [SKIP i ] to skip the 
current title or chapter and move to the next.
The title or chapter will move forward by one at a time.
•  If there is no chapter in one title, the current title will 
be skipped. 
To go back to the beginning of the current title or 
chapter, press [SKIP  j ].
Press it twice in quick successions to go to the previous 
title or chapter. The title or chapter will move 
backward one title at a time.
Using [DISPLAY]
Press [DVD] first.
1) During playback, press [DISPLAY].
2) Use  [{ / B] to select 
 , then press [ENTER].
e.g.) DVD-video
1/   5 1/   5DVD0:01:00 / 1:23:45Video
The number next to  will be highlighted.
3) Title: Use [K / L] or [the Number buttons] to enter a 
desired title number to search, then press [ENTER].
Title search will start.
Chapter:
Press [B] to move to the number next to 
 for 
chapter. 
Use [K / L] or [the Number buttons] to enter a 
desired chapter number to search, then press 
[ENTER].
After the search, playback will start automatically.
Title/Chapter Search
      
Note
•  In search mode display, total numbers of each search  contents (title/chapter/time) are shown as a 
denominator.
1/   5 1/   5 0:01:00 / 1:23:45DVDVideo
total number 
of titles total number 
of chapters total time
of the title
Using [SKIP j ] / [SKIP i ]
Press [DVD] first.
1) During playback, press [SKIP i] to skip the 
current track/file and move to the next.
The track/file will move forward one at a time.
To go back to the beginning of the current track/file, 
press  [SKIP  j ].
Press it twice in quick successions to go to the previous 
track/file. The track/file will move backward one at a 
time.
Track Search
Note
•  During CD playback, you can enter a track number  directly using [the Number buttons] for track search 
without displaying the menu.
    
Using [DISPLAY]
Press [DVD] first.
• For audio CD, MP3 or WMA, skip to step 2.
1) During playback, press [DISPLAY].
2) Use  [{ / B] to select 
 , then press [ENTER].
e.g.) audio CD
1/   5CD0:00:15 / 0:05:00
e.g.) MP3 files
1/   50:00:15MP3
The number next to  will be highlighted.
3) Use  [K / L] or [the Number buttons] to enter a  desired track/file number to search, then press 
[ENTER].
After the search, playback will start automatically.
E9KGAUD_D-VR610KU_EN.indd   63 E9KGAUD_D-VR610KU_EN.indd   63 2007/12/18   17:10:48
2007/12/18   17:10:48  
						

							Downloaded from www.Manualslib.com manuals search engine 64 EN64 EN
Press [DVD] first.
• For audio CD, skip to step 2.
1) During playback, press [DISPLAY].
2) Use  [{ / B] to select 
 , then press [ENTER].
e.g.) DVD-video
1/   5 1/   5 0:01:00 / 1:23:45DVDVideo
e.g.) audio CD
1/   5CD0:00:15 / 0:05:00
The number next to  will be highlighted.
To move to the number next to 
 , press [B].
When time search is not available, 
 and time 
counter are not displayed.
3) Use  [K / L / { / B] or [the Number buttons] to  enter a desired time to search, then press [ENTER].
After the search, playback will start automatically.
Note
•  Time search is available only in the same track, file or title.
Time Search
      
 
SEARCH
E9KGAUD_D-VR610KU_EN.indd   64 E9KGAUD_D-VR610KU_EN.indd   64 2007/12/18   17:10:50
2007/12/18   17:10:50  
						

							Downloaded from www.Manualslib.com manuals search engine 65EN65EN
Disc 
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
VCR Function
Others
REPEAT/RANDOM/PROGRAM PLAYBACK/SLIDE SHOW
Repeat Playback
Random Playback
   
Available repeat function may vary depending the discs.
Press [DVD] first.
•  For audio CD, MP3, or WMA, skip to step 2, or press 
[REPEAT] and skip to step 3.
1) During playback, press [DISPLAY] or [REPEAT]. •  If you press [REPEAT], skip to step3.
2) Use  [{ / B] to select 
 , then press [ENTER] within  
1 second, or wait for 1 second to display the 
selection menu.
1/   5 1/   5DVD0:01:00 / 1:23:45Video
3) Use  [K / L] to select a desired option to repeat,  then press [ENTER].
e.g.) DVD-video
1/   5 1/   5DVDOFF
Title
Chapter
A - B
0:01:00 / 1:23:45Video
e.g.) audio CD
1/   5CD0:00:15 / 0:05:00
Track
All
A - BOFF
e.g.) MP3/WMA/JPEG files
1/   50:00:15MP3
Track
All
GroupOFF
e.g.) DivX® files
1/   5DivX
Track
All
Group
A - BOFF
0:00:15 / 0:05:00
The selected repeat playback will start.
Repeat
Title
1/   5 1/   5DVD0:01:00 / 1:23:45Video
You can play back a disc randomly instead of playing 
back in the original order.
Press [DVD] first.
1) Press [SETUP] in stop mode.
2) Use  [K  / L] to select “CD Playback Mode”,  then press 
[ENTER].
“CD Playback Mode” menu will appear.
3) Use  [K / L] to select “Random Play”, then press  [ENTER].
Random playback will start.
e.g.) audio CD
1/   50:00:15 / 0:05:00
RandomCD
Note
•  To cancel random playback, press [STOP  C] twice 
during random playback. “OFF” appears on the 
display menu.
Note
•  Point B for the repeat A-B playback should be set  within the same title or track of point A.
•  To cancel the repeat playback, select “OFF” at step 3.  The repeat setting will also be canceled when you 
stop playback.
•  You cannot select “Group” during the random  playback of MP3/WMA/JPEG files.
•  For some DivX® files, A-B repeat playback may not  function.
•  Chapter/Track repeat will be canceled whenever a  Chapter/Track is skipped forward or backward.
•  During the A-B repeat, if you reaches the point A  with any reverse playback, the reverse playback will 
be canceled and the A-B repeat playback resumes 
from point A.
Title:
The current title will be played back repeatedly.
Chapter:
The current chapter will be played back repeatedly.
All:
The current disc will be played back repeatedly.
A-B:
Desired section can be played back repeatedly.
1) Use [K / L] to select “A-B”, then press [ENTER].
2) Press [ENTER] at the desired starting point A.
3) Press [ENTER] at the desired ending point B.
Track:
The current track or file will be played back repeatedly.
Group:
The current folder will be played back repeatedly. 
E9KGAUD_D-VR610KU_EN.indd   65 E9KGAUD_D-VR610KU_EN.indd   65 2007/12/27   14:36:37
2007/12/27   14:36:37  
						

							Downloaded from www.Manualslib.com manuals search engine 66 EN66 EN
Program Playback
Note
•  To erase tracks you selected, press [CLEAR] at step 4.
•  You can make program settings up to 50 tracks.
•  To cancel program playback, press [STOP C] twice 
during program playback. “OFF” appears on the TV 
screen.
•  You may also select a desired track using [the  Number buttons] at step 4.
REPEAT/RANDOM/PROGRAM PLAYBACK/SLIDE SHOW
You can program the disc to play back in your desired 
order.
Press [DVD] first.
1) Press [SETUP] in stop mode.
2) Use  [K  / L] to select “CD Playback Mode”,  then press 
[ENTER].
“CD Playback Mode” menu will appear.
3) Use  [K / L] to select “Program Play”, then press  [ENTER].
4) Use  [K / L] to select a desired track, then press  [ENTER] or [B].
CD Playback Mode
Program Play
0:00:00
Total
--
--------------------------------------------------------------------------------------------------
Repeat this step until you program all the desired 
tracks.
5) Press  [PLAY  B].
CD Playback Mode
Program Play
0:31:07
Total
09
041006--------------------------------------------------------------------------------------------
Program playback will start.
Slide Show
You can select the display time between 5 seconds and 
10 seconds.
Press [DVD] first.
1) Follow steps 1 and 2 in “Program Playback” on the 
left.
2) Use  [K  / L] to select “Slide Show”, then press 
[ENTER].
3) Use  [K / L] to select the display time, then press  [ENTER].
4) Press [SETUP] to exit.
Note
•  Large-size JPEG files take a few moments to be  displayed.
E9KGAUD_D-VR610KU_EN.indd   66 E9KGAUD_D-VR610KU_EN.indd   66 2007/12/18   17:10:53
2007/12/18   17:10:53  
						

							Downloaded from www.Manualslib.com manuals search engine 67EN67EN
Disc 
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
VCR Function
Others
DVD-video may have subtitles in one or more languages. 
Available subtitle languages can be found on the disc 
case. You can switch subtitle languages during playback.
Press [DVD] first.
1) During playback, press [DISPLAY].
2) Use  [{ / B] to select 
 , then press [ENTER] within  
1 second, or wait for 1 second to display the 
selection menu.
e.g.)  DVD-video
1/   5 1/   5DVD0:01:00 / 1:23:45Video
3) Use  [K / L] to select a desired subtitle language,  then press [ENTER].
1/   5 1/   5DVD0:01:00 / 1:23:45
   OFF
1.EnglishVideo
Subtitle will be displayed in the selected language.
When “OFF” is selected, subtitle will disappear.
SELECTING THE FORMAT OF AUDIO AND VIDEO
Switching Subtitles
 
Note
•  Some discs will only allow you to change the subtitle from the disc menu. Press [DISC MENU] or [TOP 
MENU] to display the disc menu.
•  If a 4-digit language code appears in the subtitle  menu, refer to the “LANGUAGE CODE” on page 106.
•  For disc with DivX® files, the TV screen only displays  the number of subtitle languages and “- - - -“ next to 
the numbers.
You can select the format of audio and video as you prefer depending on \
the contents of the disc you are playing back.
When playing back a DVD-video recorded with 2 or more 
soundtracks (these are often in different languages), you 
can switch them during playback.
When playing back audio CD, you can switch “L/R”(stereo), 
“L”(left) or “R”(right).
Press [DVD] first.
1) During playback, press [DISPLAY] or [AUDIO 
].
•  If you press [AUDIO 
], skip to step3.
2) Use  [{ / B] to select 
 , then press [ENTER] within  
1 second, or wait for 1 second to display the 
selection menu.
3) Use  [K / L] to select a desired audio soundtrack or  audio channel, then press [ENTER].
For DVD-video, VR mode DVD-RW, or DivX® files
• Audio soundtrack will switch.
e.g.)  DVD-video
1/   5 1/   5DVD0:01:00 / 1:23:45
1.Dolby Digital  2ch English
2.Dolby Digital  5.1ch EnglishVideo
•  If the title contains both main and sub audio, you can 
further select “L“ (main), “R“ (sub), “L/R“ (mixe\
d of 
main and sub).
For audio CD
• Audio channel will switch.
e.g.)  audio CD
1/   5CD0:00:15 / 0:05:00
2. L
3. R1. L/R
Switching Audio Soundtrack
   
Note
•  Some discs will only allow you to change the  soundtrack from the disc menu. Press [DISC MENU] 
or  [TOP MENU] to display the disc menu.
E9KGAUD_D-VR610KU_EN.indd   67 E9KGAUD_D-VR610KU_EN.indd   67 2007/12/18   17:10:54
2007/12/18   17:10:54  
						

							Downloaded from www.Manualslib.com manuals search engine 68 EN68 EN
You can enjoy stereophonic virtual space through your 
existing 2 channel stereo system.
Press [DVD] first.
• For audio CD, MP3 or WMA, skip to step 2.
1) During playback, press [DISPLAY].
2) Use  [{ / B] to select 
 , then press [ENTER] within  
1 second, or wait for 1 second to display the 
selection menu.
e.g.) DVD-video
1/   5 1/   5DVD0:01:00 / 1:23:45Video
3) Use  [K / L] to select “OFF”, “Type 1” or “Type 2”,  then press [ENTER].
e.g.) DVD-video
1/   5 1/   5DVD0:01:00 / 1:23:45
OFF
Type 1
Type 2Video
OFF : no effect
Type 1  : natural effect
Type 2  : emphasized effect
Note
•  Select “OFF” if sound is distorted.
•  The setting will be kept when the unit is turned off.
Switching Virtual Surround System
      
  
SELECTING THE FORMAT OF AUDIO AND VIDEO
Switching Camera Angles
Reducing Block Noise
      
Some DVD-video have scenes shot from two or more 
angles. Angle information should be on the disc case if 
the disc contains multi-angle scenes.
Press [DVD] first.
1) During playback, press [DISPLAY].
2) Use  [{ / B] to select 
 , then press [ENTER].
1/   5 1/   5DVD0:01:00 / 1:23:45Video
Angle icon appears when a switching camera angle is available.
Angle will switch each time you press [ENTER].
Press [DVD] first.
1) During playback, press [DISPLAY].
2) Use  [{ / B] to select 
 , then press [ENTER] within  
1 second, or wait for 1 second to display the 
selection menu.
e.g.) DVD-video
1/   5 1/   5DVD0:01:00 / 1:23:45Video
3) Use [K / L] to, select “Noise Reduction”, then press [ENTER].
 
1/   5 1/   5DVD0:01:00 / 1:23:45
Noise Reduction  OFF
Black Level  OFFVideo
4) Use [K / L] to select a desired option, then press [ENTER].
1/   5 1/   5DVD0:01:00 / 1:23:45
OFF
Type 1
Type 2Video
Your setting will be activated.
This function reduces noise in the playback picture. If 
noises appear on the TV screen during playing back 
discs recorded in long time recording mode such as EP 
or SLP, select “Type 1” or “Type 2”.
(“Type 2” is more effective.)
When playing back discs with a few noises such as 
DVD-video, select “OFF”.
Note
•  Angle icon does not appear on the TV screen if you  set “Angle Icon” to “OFF” in “Playback” menu.
Refer to page 90.
E9KGAUD_D-VR610KU_EN.indd   68 E9KGAUD_D-VR610KU_EN.indd   68 2007/12/18   17:10:55
2007/12/18   17:10:55  
						

							Downloaded from www.Manualslib.com manuals search engine 69EN69EN
Disc 
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
VCR Function
Others
You can adjust the black level to control the brightness 
of the picture in order to get a better picture.
1) During playback, press [DISPLAY].
2) Use  [{ / B] to select 
. Press [ENTER] within  1 
second, or wait for 1 second to display the selection 
menu.
e.g.) DVD-video 
1/   5 1/   5DVD0:01:00 / 1:23:45Video
3) Use  [K / L] to select “Black Level”, then press  [ENTER].
1/   5 1/   5DVD0:01:00 / 1:23:45
Noise Reduction  OFF
Black Level  OFFVideo
4) Use  [K / L] to select “ON”, then press [ENTER].
Your setting will be activated.
1/   5 1/   5DVD0:01:00 / 1:23:45
OFFVideo
ON
Note
•  You can adjust black level setting only during playback.
•  The setting will be kept even when the unit is turned  off.
•  The default setting is “ON”.
•  You cannot adjust the black level for the images  output through the HDMI.
Adjusting Black Level
     
SELECTING THE FORMAT OF AUDIO AND VIDEO
E9KGAUD_D-VR610KU_EN.indd   69 E9KGAUD_D-VR610KU_EN.indd   69 2007/12/18   17:10:58
2007/12/18   17:10:58  
						

							Downloaded from www.Manualslib.com manuals search engine 70 EN70 EN
INFORMATION ON DISC EDITING
Guide to a Title ListEditing Discs
Title list allows you to check the titles recorded on the 
disc easily. You can choose a title to play back from this 
list and easily edit the titles as you prefer.
Press [TOP MENU].
Title List
1 / 2
JAN/ 1/08 12:00AM  L1  LP12:00AM (2:00:00)  JAN/  1/08  L1  LP
456
123
ORG
Chapter Mark
Protect Edit Title  Name Scene Delete
Edit
JAN/31/08 11:00PM L1 LP
0 : 00 : 59
2
ORG
78
910
11
456
3312
  1.   Title list: List of the titles recorded on the disc, and 
their information.
  
•  For DVD+RW/+R, empty title always appears at the 
last of the title list.
  •  For the titles being blocked by the v-chip system, 
“BLOCK” will be displayed and you cannot watch the 
contents.
  2.   The protect icon: Appears when the title has been  protected. (Original titles only)
 3.   Arrow: Indicating there is a previous / next page.
  4.   Title list icon: Indicates a type of the displayed title  list.
ORG : VR (Original) +VR : +VR mode
PL : VR (Playlist) Video : Video mode
  5.   Title name
  6.   Title information: Displays various information on  the selected title.
 7.   Submenu: Submenus for the selected menu are  displayed here.
  8.   Title name (editable): If you do not name the title,  the recorded date, time and the recording mode are 
displayed here.
  9.   Progress bar: 
Indicating the progress of the playback. 
The vertical lines in the bar indicates chapter marks, 
and “L ” sliding on the bar indicates current point of 
playback displayed in the preview window.
 10.    Preview  window: Preview of the selected title is  displayed here.
 11.    Playback  status: Indicating the current playback  status of the selected title.
Press [RETURN] to exit the title list.
Edit the recorded disc
You will find editing discs is easy. This unit offers 
convenient edit functions which are possible only with 
DVD-RW/-R and DVD+RW/+R.
You can edit the following from a title list.
•  Assigning a name to a title
• Dividing a title
• Combining titles
•  Adding titles to a playlist
• Erasing all playlist
•  Setting or releasing the title protection
•  Adding or deleting chapter marks
•  Deleting titles or parts of titles
(Possible editing functions depend on the recording 
format and editing method.)
Original and playlist (VR mode)
For VR mode DVD-RW, you can edit the recordings in 
playlist without changing the original recordings. Playlist 
does not take up much disc space. After you make a 
recording to VR mode DVD-RW, a playlist will be created 
automatically.
What “Original” or “Playlist” is for?
Throughout this manual, you will find original and playlist 
which refer to the actual content and the edited version.
•  Original content refers to what’s actually recorded on 
the VR mode DVD-RW.
•  Playlist content refers to the edited version of the VR 
mode DVD-RW; how the original content is to be played 
back.
Finalizing a disc
•  This will allow a disc that is recorded on this unit to be  played back on other DVD player — without finalization 
it will not be playable on other DVD player.
•  After finalizing a DVD-RW/-R or DVD+R, you cannot edit  any information that is on that disc.
•  If you have recorded in DVD+RW, then editing is still  permitted after finalizing.
Using these editing functions to modify copyrighted 
content for any purpose other than your private viewing 
may be prohibited under the Copyright Laws of the 
United States and other countries, and may subject you 
to civil and criminal liability.
E9KGAUD_D-VR610KU_EN.indd   70 E9KGAUD_D-VR610KU_EN.indd   70 2007/12/18   17:10:59
2007/12/18   17:10:59