Toshiba Dvr610 User Manual

							Downloaded from www.Manualslib.com manuals search engine 21EN21EN
Disc 
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
VCR Function
Others
Note
•  If S-video cable is connected to the S-VIDEO OUT 
jack, the picture from the VCR will not be displayed.
•  Connect this unit directly to the TV. If the RCA audio/ video cables are connected to a VCR, pictures may be 
distorted due to the copy protection system.
•  You will not be able to hear the sound being output  from DVD if you are not connecting DVD AUDIO OUT 
when you made either S-video or component video 
out connection.
•  Progressive signal will not be output from the  VIDEO OUT or S-VIDEO OUT jack. 
After you have completed the connections
•  Switch the input selector on your TV to an appropriate external input channel. Press a button on the TV’s 
original remote control that selects an external input 
channel until the DVD recorder’s opening picture 
appears. Check your TV owner’s manual for details. 
To set progressive scan mode, refer to page 94
•  This unit is compatible with the progressive scan system. The 
feature provides you the higher quality images than the 
traditional output system. To utilize this feature, you must 
set “Progressive” to “ON”.
CONNECTION TO A TV
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your 
local store.
S-VIDEO IN
DVDDIGITAL
AUDIO OUT AUDIO
OUT S-VIDEO
OUT
COAXIAL L
R Y
P
B/CB
PR/CR
COMPONENT VIDEO OUTDVDDIGITAL
AUDIO OUT AUDIO
OUT S-VIDEO
OUT
COAXIAL L
R Y
P
B/CB
PR/CR
COMPONENT VIDEO OUT
Y
PB/CB
PR/CR
COMPONENT
VIDEO IN
(Green)
(Blue)(Red)
(Green)
(Blue)
(Red)
DVDDIGITAL
AUDIO OUT AUDIO
OUT S-VIDEO
OUT IN
COAXIAL L
R L
Y
PB/CBPR/CRR L
R
S-VIDEO IN --- AUDIO 
--- OU T
I N  --- V I D E O --- OU TCOMPONENT VIDEO OUTDVD/VCRHDMI OUT
AUDIO INLRVIDEO
IN
IN L
R L
R
S-VIDEO IN --- A U D I O --- OU T
I N  --- V I D E O --- OU T
DVD/VCR
AUDIO OUT (DVD)
TV
analog audio good picture better picture
S-VIDEO OUTCOMPONENT 
VIDEO OUTPUT
this unit
or
RCA audio 
cable
S-video cable component video cableRCA video 
cable
Method 1Method 2
TV
this unit
and
DVDDIGITAL
AUDIO OUT AUDIO
OUT S-VIDEO
OUT
COAXIAL L
R Y
P
/C
P
/CVIDEO OUT
AUDIO INLR
DVDDIGITAL
AUDIO OUT AUDIO
OUT S-VIDEO
OUT
COAXIAL L
R Y
P
B/CB
PR/CR
COMPONENT VIDEO OUT
AUDIO OUT (DVD/VCR)
VIDEO OUT
RCA audio cable
Available for DVD only
VCR and basic DVD connection
Make one of the following connections, depending on the capabilities of \
your existing device.
E9KGAUD_D-VR610KU_EN.indd   21 E9KGAUD_D-VR610KU_EN.indd   21 2007/12/18   17:09:48
2007/12/18   17:09:48  
						

							Downloaded from www.Manualslib.com manuals search engine 22 EN22 EN
CONNECTION TO A TV WITH AN HDMI™ COMPATIBLE PORT
A simple 1-cable connection with a device having an HDMI (high-definiti\
on multimedia interface) connector allows 
digital transfer of both digital video signals and multi-channel audio s\
ignals.
HDMI OUT
HDMI IN
HDMI cable
TV
this unit
HDMI Mode and Actual Output Signals
Press [HDMI]  to select the HDMI output mode. The output mode changes as follows every\
 time [HDMI] is pressed.
Front Panel Display Video Output Signal
480 Progressive
Press [HDMI]      
720 Progressive
Press [HDMI]      
1080 interlaced
Press [HDMI]      
1080 Progressive
Press [HDMI]      
• The HDMI mode that is not supported by display device will be skipp\
ed.
Cables not included.
Please purchase the necessary cables at your local store.
When connecting with an HDMI cable, the audio signal will be output as t\
he digital audio signal simultaneously, so 
you do not need the analog audio connection described on page 21.
Available for DVD only
E9KGAUD_D-VR610KU_EN.indd   22 E9KGAUD_D-VR610KU_EN.indd   22 2007/12/18   17:09:49
2007/12/18   17:09:49  
						

							Downloaded from www.Manualslib.com manuals search engine 23EN23EN
Disc 
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
VCR Function
Others
*HDMI: High Definition Multimedia Interface Copyright protection system
To play back the digital video images of a DVD via an HDMI connection, i\
t is necessary that both the player and the 
display device (or an AV amplifier) support a copyright protection sys\
tem called HDCP (high-bandwidth digital 
content protection system). HDCP is copy protection technology that com\
prises data encryption and authentication 
of the connected AV device. This unit supports HDCP. Please read the ope\
rating instructions of your display device 
(or AV amplifier) for more information.
Note
•  Because HDMI is an evolving technology, it is possible that some devices\
 with an HDMI input may not operate 
properly with this unit.
•  When using an HDCP-incompatible display device, the image will not be vi\
ewed properly.
•  Among the devices that support HDMI, some devices can control other devi\
ces via the HDMI connector; however,  this unit cannot be controlled by another device via the HDMI connector.\
•  The audio signals from the HDMI connector (including the sampling frequ\
ency, the number of channels and bit  length) maybe limited by the device that is connected.
•  Among the monitors that support HDMI, some do not support audio output (\
for example, projectors). In  connections with device such as this unit, audio signals are not output \
from the HDMI output connector.
•  When this unit’s HDMI connector is connected to a DVI-D compatible mo\
nitor (HDCP compatible) with an HDMI- DVI converter cable, the signals are output in digital RGB.
•  If the connected equipment is not compatible with HDMI BITSTREAM, DTS so\
und will not be output.
•  When the power failure occurs, or when you unplug the unit, some problem\
s in the HDMI setting might occur.  Please check and set the HDMI setting again.
CONNECTION TO A TV WITH AN HDMI™ COMPATIBLE PORT
Audio recording format of the disc Dolby Digital setting of this unit Actual output
DVD-video Dolby Digital
PCM
2channel PCM
Stream Dolby Digital
LPCM PCM
2channel PCM
Stream
DivX® Dolby Digital
PCM
2channel PCM
Stream Dolby Digital
MP3 / MP2 PCM
2channel PCM
Stream
For audio CD and MP3 / WMA files, 2 channel PCM will be output regardles\
s of the “Dolby Digital” setting. 
If the connected device is not compatible with HDMI BITSTREAM, audio wil\
l be output as PCM even if you select 
“Stream” in “Dolby Digital” setting (Refer to page 89).
Actual Output Modes by Media
E9KGAUD_D-VR610KU_EN.indd   23 E9KGAUD_D-VR610KU_EN.indd   23 2007/12/18   17:09:49
2007/12/18   17:09:49  
						

							Downloaded from www.Manualslib.com manuals search engine 24 EN24 EN
CONNECTION TO AN AUDIO SYSTEM
• When you change the connections, all devices should be turned off.
• Refer to the owner’s manual accompanying external devices for mo\
re information.
Note
•  The DVD AUDIO OUT and DIGITAL AUDIO OUT jacks are only useful in DVD mod\
e.
•  The audio source on a disc in a Dolby Digital multi channel surround for\
mat cannot be recorded as digital sound by an MD or DAT deck.
•  By connecting this unit to a Dolby Digital decoder, you can enjoy high-q\
uality Dolby Digital multi channel  surround sound as heard in the movie theaters.
•  By connecting this unit to the DTS decoder, you can enjoy Multi-channel \
Surround System which reproduces the  original sound as truthfully as possible. Multi-channel Surround System \
is developed by the DTS, Inc.
•  Playing back a DVD using incorrect settings may generate noise distortio\
n and may also damage the speakers.
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
Please purchase the rest of the necessary cables at your local store.
DVDDIGITAL
AUDIO OUT AUD IO
OUT S-VIDEO
OUT IN
COAXIAL L
R L
Y
PB/CBPR/CRR L
R
S-VIDEO IN --- AUD IO --- OUT
I N  --- V I D E O --- OU TCOMPONENTVIDEO OUTDVD/VCRHDMI OUT
AUDIO INLR
IN L
R
S-VIDEO I N  --- A U D I O --- OU T
I N  --- V I D E O --- OU T
DVD/VCRDVDDIGITAL
AUDIO OUT AUDIO
OUT S-VIDEO
OUT
COAXIAL L
R Y
P
B/CB
PR/CR
COMPONENT VIDEO OUT
DVDDIGITAL
AUDIO OUT AUD IO
OUT S-VIDEO
OUT IN
COAXIAL L
R L
Y
PB/CBPR/CRR L
R
S-VIDEO IN --- AUDIO --- OUT
IN --- VIDEO --- OUTCOMPONENTVIDEO OUTDVD/VCRHDMI OUT
DIGITAL
AUDIO OUT AUDIO
OUT S-VIDEO
OUT
COAXIAL L
R Y
P
B/CB
PR/CR
COMPONENT VIDEO OUT
COAXIAL
DVD
*MD deck or DAT deck can be also connected through coaxial jack.
stereo system
audio
analog audio  input jacks
RCA audio cable
AUDIO OUT
2 Channel Analog Audio ConnectionDigital Audio Connection
Dolby Digital decoder digital audio  
coaxial input 
jack
digital audio 
coaxial cable
DIGITAL AUDIO OUT 
this unit
or
Multi Channel Digital Audio Setting
Setting Setup  >General Setting >Playback  >Audio Out >
Connection Dolby DigitalDTS
If output is Dolby Digital encoded audio, connect to 
a Dolby Digital decoder. Stream
OFF
If output is DTS encoded audio, connect to a DTS 
decoder. PCM
ON
If output is encoded audio for both Dolby Digital and 
DTS, connect to the decoder which encodes multiple 
audio sources. Stream
ON
Connecting to an MD deck or DAT deck. PCMOFF
If not connected to any external devices. PCMOFF
* To complete these settings, refer to page 89.
E9KGAUD_D-VR610KU_EN.indd   24 E9KGAUD_D-VR610KU_EN.indd   24 2007/12/18   17:09:49
2007/12/18   17:09:49  
						

							Downloaded from www.Manualslib.com manuals search engine 25EN25EN
Disc 
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
VCR Function
Others
INITIAL SETTING
Turn on this unit for the first time, you need to follow these steps.
1
 Press [I/yy ON/STANDBY].
Before:
Turn the TV on. Select the input to 
which the unit is connected.
2
 Use [K / L] to select your desired  language, then press [ENTER] to set 
language.
Initial Setting
OSD LanguageEnglish
Français Español
3
  Press [ENTER] to activate “Clock  Setting”.
Initial Setting
Clock Setting- - -  /  - -  /  - - - -  ( - - - )
- -  :  - -  - -
4
  Proceed to step 3 in “Clock Setting” on page 26.
SE-R0295
OPEN/
CLOSE INPUT
SELECT HDMI
.@/: ABC GHI
PQRS TUV
SPACE
SETUP DISPLAY AUDIO TIMER
PROG.
DISC MENU
CLEAR RETURN
TOP MENU
WXYZ
SAT.LINK
JKL MNO
DEFTRACKING
ENTER
INSTANT
SKIP
PLAY
DVD
VCR
PAU S E REV
SKIP
STOPSKIP
FWD
1.3x/0.8x
PLAYTIME SLIP
TIMER SET ZOOM
SEARCH
REPEAT REC
REC MODE
DUBBING
ENTER
E9KGAUD_D-VR610KU_EN.indd   25 E9KGAUD_D-VR610KU_EN.indd   25 2007/12/18   17:09:50
2007/12/18   17:09:50  
						

							Downloaded from www.Manualslib.com manuals search engine 26 EN26 EN
SETTING THE CLOCK
Set the clock before you try the timer programming.
1
  Press [SETUP] and use [K / L] to select “General Setting”, then press 
[ENTER].
2
 Use [K / L] to select “Clock”, then press [ENTER].
“Clock” menu will appear.
3
 Use [K / L] to select calendar or time, then press [ENTER]. 
General Setting
Playback
Display
Video
Recording
Clock
DivX
HDMI
Reset All
Clock SettingJAN / 01 / 2008 ( TUE ) 12 : 00 AM
4
 Use [{ / B] to select an item to set, and use [K / L] to select the contents 
to suit your preference, then press 
[ENTER].
General Setting
Playback
Display
Video
Recording
Clock
DivX
HDMI
Reset All
Clock SettingJAN / 01 / 2008 ( TUE ) 12 : 00 AM
Your setting will be activated.
The clock start counting when you press 
[ENTER].
5
  Press [SETUP] to exit.
Note
•  Your clock setting will be lost if either there is a power failure or this unit has been unplugged for more than 
30 seconds.
•  For setting the day, year, hour and minute,  [the Number buttons] can also be used.
•  You can set the built-in calendar from the year 2007  up to 2057.
Clock Setting
SE-R0295
OPEN/
CLOSE INPUT
SELECT HDMI
.@/: ABC GHI
PQRS TUV
SPACE
SETUP DISPLAY AUDIO TIMER
PROG.
DISC MENU
CLEAR RETURN
TOP MENU
WXYZ
SAT.LINK
JKL MNO
DEFTRACKING
ENTER
INSTANT
SKIP
PLAY
DVD
VCR
PAU S E REV
SKIP
STOPSKIP
FWD
1.3x/0.8x
PLAYTIME SLIP
TIMER SET ZOOM
SEARCH
REPEAT REC
REC MODE
DUBBING
ENTER
GHI
PQRS TUV
SPACE WXYZ
JKL MNO
.@/: ABC DEF
SETUP
E9KGAUD_D-VR610KU_EN.indd   26 E9KGAUD_D-VR610KU_EN.indd   26
2007/12/18   17:09:51
2007/12/18   17:09:51  
						

							Downloaded from www.Manualslib.com manuals search engine 27EN27EN
Disc 
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
VCR Function
Others
FORMATTING A DISC
Choosing the Recording Format of a Brand-New DVD-RW
 
When inserting a brand-new DVD-RW or DVD+RW, the unit automatically star\
ts to initialize the disc. DVD+RW will 
always be formatted in +VR mode, and DVD-RW will be formatted either vid\
eo or VR mode according to the recording 
format mode setting of the unit. Before insert a brand-new DVD-RW, you n\
eed to set the recording format to the 
desired mode. You can also manually format a DVD-RW once it has been use\
d.
1
 Press [SETUP].
2
 Use [K / L] to select “DVD Menu”, 
then press [ENTER].
Setup
Timer Programming
Title List
DVD Menu General Setting
3
 Use [K / L] to select “Format”, then  press [ENTER].
DVD Menu
Format
Finalize
4
 Use [K / L] to select “Format Mode”,  then press [ENTER].
DVD Menu
Format
Finalize
Start
Format Mode
5
 Use [K / L] to select “Video mode” or  “VR mode”, then press [ENTER].
6
  Press [SETUP] to exit.
7
  Insert a brand-new disc.
Formatting will start.
Formatting 90%
8
  Formatting is completed.
“100%” is indicated.Note
•  The recording format setting is effective only for 
DVD-RW. You cannot change the recording format 
for a DVD-R and DVD+RW/+R.
•  You cannot mix two formats on one DVD-RW. If you  insert a disc that has been recorded before, the 
recording format cannot be changed even if you 
change it in the main menu.
SE-R0295
OPEN/
CLOSE INPUT
SELECT HDMI
.@/: ABC GHI
PQRS TUV
SPACE
SETUP DISPLAY AUDIO TIMER
PROG.
DISC MENU
CLEAR RETURN
TOP MENU
WXYZ
SAT.LINK
JKL MNO
DEFTRACKING
ENTER
INSTANT
SKIP
PLAY
DVD
VCR
PAU S E REV
SKIP
STOPSKIP
FWD
1.3x/0.8x
PLAYTIME SLIP
TIMER SET ZOOM
SEARCH
REPEAT REC
REC MODE
DUBBING
ENTER
SETUP
E9KGAUD_D-VR610KU_EN.indd   27 E9KGAUD_D-VR610KU_EN.indd   27 2007/12/18   17:09:55
2007/12/18   17:09:55  
						

							Downloaded from www.Manualslib.com manuals search engine 28 EN28 EN
FORMATTING A DISC
Reformatting a Disc Manually
  
If you are using a DVD-RW or DVD+RW, you can format the disc by performi\
ng “Format”. You can format DVD-RW for 
either video mode recording or VR mode recording. DVD+RW can be format i\
n order to erase all content of the disc.
Insert a recordable disc.
1
 Press [SETUP].
2
 Use [K / L] to select “DVD Menu”, then press [ENTER].
Setup
Timer Programming
Title List
DVD Menu General Setting
3
 Use [K / L] to select “Format”, then  press [ENTER].
e.g.) VR mode DVD-RW
DVD Menu
Format
Finalize
Disc Protect OFF      ONDelete All Playlists
4
 Use [K / L] to select “Start”, then press [ENTER].
DVD Menu
Format
Finalize
Disc Protect OFF      ONDelete All Playlists
Start
Format Mode
Selection menu will appear and prompt you to 
confirm.
•  For DVD+RW, use [K / L] to select “Yes”, then  press  [ENTER].
5
 Use [K / L] to select “Yes”, then press 
[ENTER].
Formatting will start.
If you want to cancel formatting, select “No”.
DVD Menu
Format
Finalize
Disc Protect OFF      ONDelete All Playlists
Start
Format ModeAre you sure? Ye sNo
6
  Formatting is completed.
“100%” is indicated.
Formatting 100%
Note
•  When you reformat the disc, the contents of the disc 
are erased.
•  For DVD-RW, make sure that the recording format is  set to the desired mode. (See steps 1 to 6 in 
“Choosing the Recording Format of a Brand-New 
DVD-RW” on page 27.)
SE-R0295
OPEN/
CLOSE INPUT
SELECT HDMI
.@/: ABC GHI
PQRS TUV
SPACE
SETUP DISPLAY AUDIO TIMER
PROG.
DISC MENU
CLEAR RETURN
TOP MENU
WXYZ
SAT.LINK
JKL MNO
DEFTRACKING
ENTER
INSTANT
SKIP
PLAY
DVD
VCR
PAU S E REV
SKIP
STOPSKIP
FWD
1.3x/0.8x
PLAYTIME SLIP
TIMER SET ZOOM
SEARCH
REPEAT REC
REC MODE
DUBBING
ENTER
SETUP
E9KGAUD_D-VR610KU_EN.indd   28 E9KGAUD_D-VR610KU_EN.indd   28 2007/12/18   17:09:56
2007/12/18   17:09:56  
						

							Downloaded from www.Manualslib.com manuals search engine 29EN29EN
Disc 
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
VCR Function
Others
SETTING A DISC TO PROTECT
1
 Press [SETUP].
2
 Use [K / L] to select “DVD Menu”, 
then press [ENTER].
3
 Use [K / L] to select “Disc Protect  OFF 
 ON”, then press [ENTER].
e.g.) VR mode DVD-RW
DVD Menu
Format
Finalize
Disc Protect OFF      ONDelete All Playlists
4
 Use [K  / L] to select “Yes”,  then press 
[ENTER].
DVD Menu
Format
Finalize
Disc Protect OFF      ONDelete All PlaylistProtect this disc? Ye sNo
A disc will be protected.
This operation may take 
awhile to be completed.
To prevent accidental recording, editing or erasing the 
titles, you can protect them from “DVD Menu” menu.
Note
To cancel the disc protect:
•  When you insert a disc protected with this unit, 
  “Disc Protect ON 
 OFF” will appear instead of “OFF  ON”.
DVD Menu
Format
Finalize
Disc Protect ON        OFFDelete All Playlists
  To release the protection for the disc, select “Disc  Protect ON  OFF” at step 3, then follow rest of the 
procedures. 
  
SE-R0295
OPEN/
CLOSE INPUT
SELECT HDMI
.@/: ABC GHI
PQRS TUV
SPACE
SETUP DISPLAY AUDIO TIMER
PROG.
DISC MENU
CLEAR RETURN
TOP MENU
WXYZ
SAT.LINK
JKL MNO
DEFTRACKING
ENTER
INSTANT
SKIP
PLAY
DVD
VCR
PAU S E REV
SKIP
STOPSKIP
FWD
1.3x/0.8x
PLAYTIME SLIP
TIMER SET ZOOM
SEARCH
REPEAT REC
REC MODE
DUBBING
ENTER
SETUP
E9KGAUD_D-VR610KU_EN.indd   29 E9KGAUD_D-VR610KU_EN.indd   29 2007/12/18   17:09:58
2007/12/18   17:09:58  
						

							Downloaded from www.Manualslib.com manuals search engine 30 EN30 EN
PLAYING THE DISCS IN OTHER DVD PLAYERS
  
1
  Press [SETUP] and use [K / L] to select “General Setting”, then press 
[ENTER].
“General Setting” menu will appear.
2
 Use [K / L] to select “Recording”, then press [ENTER].
“Recording” menu will appear.
3
 Use [K / L] to select “Auto Finalize”, then press [ENTER].
4
 Use [K / L] to select “Disc Full” or “End of Timer Rec”, then press 
[ENTER].
General Setting
Playback
Display
Video
Recording
Clock
DivX
HDMI
Reset All Auto Chapter
Recording Audio Select (XP)Auto FinalizeAspect Ratio (Video mode)
Dubbing Mode
Make Recording Compatible
Auto FinalizeDisc Full
End of Timer Rec
5
 Use [K / L] to select “ON”, then press 
[ENTER].
General Setting
Playback
Display
Video
Recording
Clock
DivX
HDMI
Reset All Auto Chapter
Recording Audio Select (XP)Auto FinalizeAspect Ratio (Video mode)
Dubbing Mode
Make Recording Compatible
Auto FinalizeDisc Full
End of Timer RecDisc FullON
OFF
General Setting
Playback
Display
Video
Recording
Clock
DivX
HDMI
Reset All Auto Chapter
Recording Audio Select (XP)Auto FinalizeAspect Ratio (Video mode)
Dubbing Mode
Make Recording Compatible
Auto FinalizeDisc Full
End of Timer RecEnd of Timer RecON
OFF
Your setting will be activated.
6
  Press [SETUP] to exit.
You can finalize discs automatically using this function. 
You can use this function to finalize discs after finishing 
all timer recordings and at the end of the disc space.
Auto Finalizing
SE-R0295
OPEN/
CLOSE INPUT
SELECT HDMI
.@/: ABC GHI
PQRS TUV
SPACE
SETUP DISPLAY AUDIO TIMER
PROG.
DISC MENU
CLEAR RETURN
TOP MENU
WXYZ
SAT.LINK
JKL MNO
DEFTRACKING
ENTER
INSTANT
SKIP
PLAY
DVD
VCR
PAU S E REV
SKIP
STOPSKIP
FWD
1.3x/0.8x
PLAYTIME SLIP
TIMER SET ZOOM
SEARCH
REPEAT REC
REC MODE
DUBBING
ENTER
SETUP
E9KGAUD_D-VR610KU_EN.indd   30 E9KGAUD_D-VR610KU_EN.indd   30 2007/12/18   17:10:00
2007/12/18   17:10:00