Toshiba Dvr610 User Manual

							Downloaded from www.Manualslib.com manuals search engine 31EN31EN
Disc 
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
VCR Function
Others
PLAYING THE DISCS IN OTHER DVD PLAYERS
Finalizing a Disc
1
 Press [SETUP].
2
 Use [K / L] to select “DVD Menu”, 
then press [ENTER].
“DVD Menu“ menu will appear.
3
 Use [K / L] to select “Finalize”, then press [ENTER].
4
 Use [K  / L] to select “Yes”,  then press 
[ENTER].
e.g.) VR mode DVD-RW
DVD Menu
Format
Finalize
Disc Protect OFF      ONDelete All PlaylistFinalize disc? Ye sNo
Finalizing will start.
Finalizing 90%
This operation may take 
awhile to be completed.
5
  Finalizing is completed.
You will need to finalize discs to play back on other DVD 
players.
Finalizing may take several minutes up to an hour.
Since the process of the finalization fills empty space of 
the disc, a shorter recording period on the disc will 
require a longer time period for finalization. Do not 
unplug the power cord during finalization.
   
SE-R0295
OPEN/
CLOSE INPUT
SELECT HDMI
.@/: ABC GHI
PQRS TUV
SPACE
SETUP DISPLAY AUDIO TIMER
PROG.
DISC MENU
CLEAR RETURN
TOP MENU
WXYZ
SAT.LINK
JKL MNO
DEFTRACKING
ENTER
INSTANT
SKIP
PLAY
DVD
VCR
PAU S E REV
SKIP
STOPSKIP
FWD
1.3x/0.8x
PLAYTIME SLIP
TIMER SET ZOOM
SEARCH
REPEAT REC
REC MODE
DUBBING
ENTER
DISC MENU
RETURN
SETUP
STOP
TOP MENU
E9KGAUD_D-VR610KU_EN.indd   31 E9KGAUD_D-VR610KU_EN.indd   31 2007/12/18   17:10:01
2007/12/18   17:10:01  
						

							Downloaded from www.Manualslib.com manuals search engine 32 EN32 EN
PLAYING THE DISCS IN OTHER DVD PLAYERS
To cancel finalizing...
(DVD-RW only)
Press [STOP  C] during the finalizing is in progress. Use 
[K / L] to select “Yes”,  then press [ENTER]. Finalizing is 
canceled and the unit switches to stop mode.
Finalizing 5%
Do you want to cancel ?Ye s
No
If “” appears when [STOP C] is pressed, you cannot 
cancel finalizing because the finalizing has already 
reached at a critical point in its process.
If “No” is selected and [ENTER] or [RETURN] is pressed, 
finalizing is continued.
You cannot cancel finalizing a DVD-R, DVD+R and 
DVD+RW once it has started.
Note
•  Finalizing a disc in video mode and +VR mode 
automatically creates a title menu.
•  After you finalize the DVD+RW, you can call up the  title list by pressing [TOP MENU], or you can call up 
the title menu by pressing [DISC MENU].
•  Even after DVD+RW is finalized, you can still record  or edit. After you finalize DVD-RW/-R or DVD+R, you 
cannot edit or record anything else on that disc.
•  If you insert a DVD-RW finalized with this unit, “Undo  Finalization” will appear instead of “Finalize” at 
step 3.
•  To release the finalization of the DVD-RW disc, select  “Undo Finalization” at step 3.
DVD Menu
Format
Undo Finalization
Disc Protect OFF        ON
Delete All Playlists
•  To undo the finalization of the DVD+RW, make an additional recording onto the disc.
•  DO NOT power off during finalizing. This may result  in a malfunction.
•  For DVD+RW, if you have added or deleted chapters,  or made chapters hidden, you must finalize the disc 
before being able to see those effects on other units.  
To play back discs other than DVD+RW on other DVD 
players, you will need to finalize.
E9KGAUD_D-VR610KU_EN.indd   32 E9KGAUD_D-VR610KU_EN.indd   32 2007/12/18   17:10:03
2007/12/18   17:10:03  
						

							Downloaded from www.Manualslib.com manuals search engine 33EN33EN
Disc 
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
VCR Function
Others
INFORMATION ON DVD RECORDING
You can select a recording mode among 5 options, and 
the recording time will depend on the recording mode 
you select as follows.
Recording mode Recording time
Video/
Sound Quality
12cm 8cm
XP 60 min 18 min
SP120 min 36 min
LP240 min 72 min
EP 360 min 108 min
SLP 480 min 144 min
•  The recording times listed above are estimates and are 
for reference purposes only. Actual recording times may 
vary.
•  The audio and video quality of content being recorded  may differ depending on the recording mode/recording 
time chosen.
Recording Mode
You cannot record copy-protected program using this 
unit. Copy-protected video signal is included in DVD-
videos, some satellite broadcasts, some pay-per-view 
stations and some “premium” stations.
If copy-protected material is detected, recording will 
pause or stop automatically and an error message 
appears on the screen.
“Copy-once only” video can only be recorded to CPRM 
compatible DVD-RW formatted in VR mode.
What is “CPRM”?
CPRM is a copy protection system with scramble system 
regarding the recording of “copy-once” broadcast 
programs. CPRM stands for Content Protection for 
Recordable Media.
This unit is CPRM compatible, which means that you can 
record copy-once broadcast programs, but you cannot 
make another copy of those recordings. CPRM recordings 
can only be made on CPRM compatible DVD-RW formatted 
in VR mode, and CPRM recordings can only be played back 
on DVD players that are specifically compatible with CPRM.
Making discs playable in other DVD players (Finalize)For DVD-RW/-R, it is necessary to finalize the disc after 
recording, in order to play back the disc on other DVD 
players. (Refer to pages 30-32.) For DVD+RW/+R, it is 
recommended to finalize the disc in order to make the 
disc more compatible to other DVD player. When video 
and +VR mode disc are finalized, a title menu is created. 
You cannot finalize discs in other DVD recorders.
Restrictions on Recording
Note
•  This unit cannot record to CD-RW or CD-R.
•  DVD-RW/-R, DVD+RW/+R and CD-RW/-R recorded on  a personal computer or a DVD or CD recorder may 
not be played back if the disc is damaged or dirty or 
if there is condensation on the player’s lens.
•  If you record a disc using a personal computer, even  if it is recorded in a compatible format it may not be 
played back because of the settings of the 
application software used to create the disc. (Check 
with the software publisher for more detailed 
information.)
•  Discs recorded in video mode on this unit cannot  record additional information using other DVD 
recorders.
•  It is not possible to use a DVD-RW/DVD+RW  formatted with this unit on other DVD recorder 
unless the content of the disc was also recorded with 
this unit.
•  Since the recording is made by the VBR (variable bit  rate) method, depending on the picture you are 
recording, the actual remaining time for recording 
may be a little shorter than the remaining time 
displayed on the TV screen.
E9KGAUD_D-VR610KU_EN.indd   33 E9KGAUD_D-VR610KU_EN.indd   33 2007/12/18   17:10:03
2007/12/18   17:10:03  
						

							Downloaded from www.Manualslib.com manuals search engine 34 EN34 EN
SETTINGS FOR A RECORDING
Use this feature to make the discs recorded on other unit 
recordable on this unit. When you make an additional 
recording on this unit with “Make Recording Compatible” 
set to “ON”, the title list is automatically converted to our 
style.
1)  Press [SETUP] and use [K / L] to select “General 
Setting”, then press [ENTER].
2)  Use [K  / L] to select “Recording”, then press 
[ENTER].
“Recording” menu will appear.
3)  Use [K  / L] to select “Make Recording Compatible”, 
then press [ENTER].
4)  Use [K  / L] to select “ON” or “OFF”, then press 
[ENTER].
General Setting
Playback
Display
Video
Recording
Clock
DivX
HDMI
Reset All Auto Chapter
Recording Audio Select (XP)Auto FinalizeAspect Ratio (Video mode)
Dubbing Mode
Make Recording Compatible
Make Recording CompatibleON
OFF
ON: 
   Title list will be replaced when you make 
additional recordings to the discs recorded by 
other units.
OFF:   Prohibiting additional record to the disc that  has a title list created by other units.
5) Press [SETUP] to exit.
 
Make Recording CompatibleSetting for Auto Chapter
You can set a specified time for chapter marks.
1)  Press [SETUP] and use [K  / L] to select “General 
Setting”, then press [ENTER].
2)  Use [K  /  L ] to select “Recording”, then press [ENTER].
“Recording” menu will appear.
3)  Use [K  /  L ] to select “Auto Chapter”, then press 
[ENTER].
4)  Use [K  / L] to select a desired time option, then 
press [ENTER].
General Setting
Playback
Display
Video
Recording
Clock
DivX
HDMI
Reset All Auto Chapter
Recording Audio Select (XP)Auto FinalizeAspect Ratio (Video mode)
Dubbing Mode
Make Recording Compatible
Auto ChapterOFF
  5 minutes
10 minutes
15 minutes
30 minutes
60 minutes
5) Press [SETUP] to exit.
Note
•  The interval for auto chapter may be up to two 
minutes different from the time option you set.
•  A blank chapter may be created depending on the  remaining time of the disc.
Note
•  This function is also available for unfinalized DVD+R.
    
E9KGAUD_D-VR610KU_EN.indd   34 E9KGAUD_D-VR610KU_EN.indd   34 2007/12/18   17:10:05
2007/12/18   17:10:05  
						

							Downloaded from www.Manualslib.com manuals search engine 35EN35EN
Disc 
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
VCR Function
Others
SETTINGS FOR A RECORDING
You can enjoy high quality sound recording. This function 
works only when the recording mode is set at XP.
1)  Press [SETUP] and use [K  / L] to select “General 
Setting”, then press [ENTER].
2)  Use [K  / L] to select “Recording”, then press 
[ENTER].
“Recording” menu will appear.
3)  Use [K  / L] to select “Recording Audio Select (XP)”, 
then press [ENTER].
4)  Use [K  / L] to select “PCM” or “Dolby Digital”, then 
press [ENTER].
General Setting
Playback
Display
Video
Recording
Clock
DivX
HDMI
Reset All Auto Chapter
Recording Audio Select (XP)Auto FinalizeAspect Ratio (Video mode)
Dubbing Mode
Make Recording Compatible
Recording Audio Select (XP)PCM
Dolby Digital
PCM: 
 Records PCM audio for the best quality sound.
Dolby Digital:
 Records Dolby Digital audio for good quality sound.
5) Press [SETUP] to exit.
Recording Audio Select (XP)Setting Aspect Ratio for Video Mode 
Recording
You can set aspect ratio for video mode recording.
1)  Follow step 1 to 2 on “Recording Audio Select(XP)”.
2)  Use [ K /  L ] to select “Aspect Ratio (Video mode)”, 
then press [ENTER].
3)  Use [K  /  L ] to select your desired setting, then press 
[ENTER].
General Setting
Playback
Display
Video
Recording
Clock
DivX
HDMI
Reset All Auto Chapter
Recording Audio Select (XP)Auto FinalizeAspect Ratio (Video mode)
Dubbing Mode
Make Recording Compatible
Aspect Ratio (Video mode)Auto
4 : 3
16 : 9
Auto (default): It will be recorded with whichever the 
ratio that the program you started to record are 
broadcasted with. 
4:3 :  Recorded in the aspect ratio of 4:3.
16:9 
:  Recorded in the aspect ratio of 16:9.
4) Press [SETUP] to exit.
Note
•  “PCM” stands for Pulse Code Modulation. It changes  analog sound to digital sound without compressing 
audio data.
•  When the recording mode is set at other than XP, the  unit records “Dolby Digital” audio automatically even 
if you selected “PCM”.
 
Note
•  For DVD-RW VR mode, the image will be recorded in whichever the ratio that the program you record are 
broadcasted with, regardless of the “Aspect Ratio 
(Video mode)” setting.
•  For DVD+RW/+R, the image will always be recorded  in aspect ratio of 4:3.
    
E9KGAUD_D-VR610KU_EN.indd   35 E9KGAUD_D-VR610KU_EN.indd   35 2007/12/18   17:10:06
2007/12/18   17:10:06  
						

							Downloaded from www.Manualslib.com manuals search engine 36 EN36 EN
BASIC RECORDING & ONE-TOUCH TIMER RECORDING
1
 Press [I/yy ON/STANDBY].
Turn on the TV and be sure to select the input to 
which the unit is connected.
Press [DVD].
2
 Press [OPEN/CLOSE A] to open the 
disc tray and insert your disc with its 
label facing up.
Align the disc to 
the disc tray guide.
3
 Press [OPEN/CLOSE  A] to close the 
disc tray.
It may take awhile to load 
the disc completely.
•  When inserting a brand-new DVD-RW or  DVD+RW, the unit automatically starts to 
format.
•  If titles have been recorded on the disc, the  title list is displayed. Press [STOP  C] to exit the 
title list.
4
  Press [REC MODE] to select a 
recording mode.
Refer to “Recording Mode” on page 33 for DVD 
or “Recording” on page 99 for VCR.
SP 1:53
5
  Press [INPUT SELECT ] to select the 
appropriate external input position 
(L1/L2) to which your external tuner 
is connected. Then select the desired 
channel to record on the external 
tuner.
Follow the steps to record TV programs.
    
SE-R0295
OPEN/
CLOSE INPUT
SELECT HDMI
.@/: ABC GHI
PQRS TUV
SPACE
SETUP DISPLAY AUDIO TIMER
PROG.
DISC MENU
CLEAR RETURN
TOP MENU
WXYZ
SAT.LINK
JKL MNO
DEFTRACKING
ENTER
INSTANT
SKIP
PLAY
DVD
VCR
PAU S E REV
SKIP
STOPSKIP
FWD
1.3x/0.8x
PLAYTIME SLIP
TIMER SET ZOOM
SEARCH
REPEAT REC
REC MODE
DUBBING
DISPLAY
INPUT
SELECTOPEN/
CLOSE
PAUSE
RECREC MODE
STOP
TIMER SET
DVD
E9KGAUD_D-VR610KU_EN.indd   36 E9KGAUD_D-VR610KU_EN.indd   36 2007/12/18   17:10:08
2007/12/18   17:10:08  
						

							Downloaded from www.Manualslib.com manuals search engine 37EN37EN
Disc 
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
VCR Function
Others
y
BASIC RECORDING & ONE-TOUCH TIMER RECORDING
7
 Press [STOP  C] to stop recording.
The recorded title will be included in the title list. 
(Refer to “Guide to a Title List” on page 70.)
Wait for a moment  90%
This operation may take 
awhile to be completed.
6
 Press [REC  I] to start recording.
“I” will be displayed for 5 seconds.
   I
Press [PAUSE  F] to pause recording. 
Press  [PAUSE  F]] or [REC  I] again to restart 
recording.
To set one-touch timer recording (OTR)...
This is a simple way to set the recording time in blocks 
of 30 minutes.
Press  [REC I] repeatedly until the desired recording 
time (30 minutes to 8 hours) appears on the TV screen.
One-touch timer recording will start.
0:30
(normal recording)
8:00 7:30 1:00
   I0:30
•  To change the recording length during one-touch 
timer recording, press [REC  I] repeatedly until the 
desired length appears.
•  To cancel one-touch timer recording within the  specified time, press [STOP  C].
Note
• When you press [REC I], recording starts immediately and continues until the disc is full or you\
 stop recording.
•  When the unit clock has not been set, the space for a date and time of t\
itle names will be blank.
•  You cannot change the recording mode during the recording pause mode.
Note for one-touch timer recording
•  The remaining recording time will be displayed on the front panel displa\
y during one-touch timer recording. Press  [DISPLAY] to see it on the TV screen.
•  Unlike the timer recording, you can perform the following operations dur\
ing one-touch timer recording. - Turning off the power (One-touch timer recording will be canceled.).\
- Using [REC  I] or [STOP C] on the remote control.
•  You cannot use the pause function during one-touch timer recording.
•   If DVD one-touch timer recording is completed during VCR playback or rec\
ording, the DVD will be in stop mode  and the VCR keeps the current mode.
•  When one-touch timer recording is finished and the power is turned off, \
the unit will switch to the timer-standby  mode automatically if a timer recording has been programmed. Press [TIMER SET] to cancel the timer-standby 
mode to use the unit continuously.
E9KGAUD_D-VR610KU_EN.indd   37 E9KGAUD_D-VR610KU_EN.indd   37 2007/12/18   17:10:10
2007/12/18   17:10:10  
						

							Downloaded from www.Manualslib.com manuals search engine 38 EN38 EN
TIMER RECORDING
1
  Press [TIMER PROG.].
2
 Use [K / L] to select “New Program”, then press [ENTER].
Timer Programming
1/1
TUE JAN/01 10:00AM
   Date  Start  End  L1/L2
 New 
Program
•  If there are 6 or more programs, use 
[SKIP j / i] to change pages.
You can program the unit to record up to 12 programs 
within a month in advance. Daily or weekly program 
recordings are also available.
Before recording, make sure
•  Connect the external tuner to either L1 or L2 and set it 
to output audio/video signals when it comes to the time 
you want to start recording.
•  Do not change the external tuner’s channel while you  are recording. You cannot watch one channel and 
record another at the same time.
•  Set the clock before setting a timer programming.
•  Insert a recordable disc with enough recordable space or  a cassette tape with an erase-protection tab. Guide to Timer Programming Display
Timer Programming
1/1
TUE JAN/01 10:00AM
SP  (1:00) JAN/  2/08  12:00 AM L1 SP
   Date  Start  End  L1/L2
   JAN/02  12:00AM  1:00AM  L1
 New  Program
1
5
3
4
2
1.   Title of a Timer Program (Contains date, time, external 
input, recording mode of the program)
2.   Current date and time
3.  
 Recording mode and length of the recording
4.   Timer program list
5.  
 Total number of pages and current page (2 pages maximum) 
     
Note
•  If you have not set the clock yet:
  “Clock Setting” menu will appear instead of the timer programming \
list at step 1. Continue with the step 3 in  “Clock Setting” on page 26 before setting a timer programming.
• Use  [s / B] to move the cursor to the left and the right in “Timer Programming”\
 menu.
•  If a basic recording or one-touch timer recording is in progress on one \
component (e.g., VCR) and the timer 
recording set for the other component (e.g., DVD) is about to begin, t\
he unit automatically switches to the 
programmed channel for timer recording 2 minutes before the programmed s\
tarting time, and the recording in 
progress (for VCR) will be canceled UNLESS their recording channels ar\
e the same. If their recording channels are 
the same, the timer recording will start without canceling the recording\
 currently in progress. In this case, the 
recording of the same channel will be made on both DVD and VCR.
•  You cannot make a program whose recording time exceeds 12 hours.
•   Cancel the timer-standby mode by pressing [TIMER SET] before operation for either DVD or VCR. When finished operating, press [TIMER SET] to resume the timer-standby mode.
•   In the timer-standby mode, you can turn on the power and use the compone\
nt (VCR or DVD) which is not  currently timer-programmed.
.@/: ABC
GHI
PQRS TUV
SPACE
SETUP DISPLAY AUDIO TIMER
PROG.
DISC MENU
CLEAR RETURN
TOP MENU
WXYZ
SAT.LINK
JKL MNO
DEFTRACKING
ENTER
INSTANT
SKIP
PLAY
DVD
VCR
PAU S E REV
SKIP
STOPSKIP
FWD
1.3x/0.8x
PLAYTIME SLIP
TIMER SET ZOOM
SEARCH
REPEAT REC
REC MODE
DUBBING
ENTER
SETUP
SKIPSKIPSTOP
TIMER
PROG.
TIMER SET
E9KGAUD_D-VR610KU_EN.indd   38 E9KGAUD_D-VR610KU_EN.indd   38 2007/12/18   17:10:11
2007/12/18   17:10:11  
						

							Downloaded from www.Manualslib.com manuals search engine 39EN39EN
Disc 
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
VCR Function
Others
3
 Use [K / L] to enter the date, then 
press [B].
Timer Programming
1/1
TUE JAN/01 10:00AM
   Date  Start  End  L1/L2
 New 
ProgramDate
JAN/02
SP 2 : 00Start
- - : - -End
- - : - -
L1/L2 L1REC To ModeDVD SP
Daily
MON-SATJAN/01
JAN/31
MON-FRI
SAT FRI
SUN
4
 Use [K / L / { / B] or [the Number  buttons] to enter the start and end 
time, then press [B].
1/1
 New  ProgramDate
SP 2 : 00StartEnd
- - : - -
L1/L2 L1REC To ModeDVD SPJAN/02 12 : 00AM
•  You cannot make a program whose recording 
time exceeds 12 hours.
5
 Use [K / L] to select an appropriate 
external input (L1/L2) to which your 
external tuner is connected, then 
press [B].
1/1
 New  ProgramDate
SP 1 : 00StartEnd
L1/L2REC To ModeDVD SP
JAN/02 12 : 00AM 1 : 00AML1
6
 Use [K
 / L] to select a recording media 
(“DVD” or “VCR”), then press [B ].
1/1
 New ProgramDate
SP 1 : 00StartEnd
L1/L2REC To ModeSP
JAN/02 12 : 00AM 1 : 00AM
L1DVD
7
 Use [K / L] to select a recording mode.
1/1
 New  ProgramDate
SP 1 : 00StartEnd
L1/L2REC To Mode
JAN/02 12 : 00AM 1 : 00AM
L1DVD SP
Refer to “Recording Mode” on page 33 for DVD 
or “Recording” on page 99 for VCR.
•  You can check the remaining recordable space 
of the disc when you select the recording 
mode.
Date
SP 1 : 00StartEnd
L1/L2REC To Mode
JAN/02 12 : 00AM 1 : 00AM
L1DVD SP
Auto recording mode select...
When “Auto” is selected as a recording mode, the unit 
calculates how much time is available on the disc and 
determines the appropriate recording mode to 
complete recording the program.
1/1
 New  ProgramDate
Auto 1 : 00StartEnd
L1/L2REC To Mode
JAN/02 12 : 00AM 1 : 00AM
L1DVD Auto
•  “Auto” is only available for one program in the timer 
program list. 
•  The recording may be cut short, when the available  recording space of the disc is too limited.
8
  Press [ENTER] when all items are 
entered. 
Your program setting will be stored.
•  To set another program, repeat steps 2 to 7.
•  To exit, press [TIMER PROG.] or [SETUP].
•  When 2 or more programs are overlapped,  “Timer program overlapped” appears, and the 
overlapped program will be displayed in blue. 
To correct the timer program refer to 
“Checking, canceling, or correcting the timer 
programming information” on page 40.
9
  Press [TIMER SET] to set a timer 
programming.
 will appear on the front panel display, while this 
unit waits to make the recording.
CS DR CD
HDD DVD
“VCR” will appear on the front panel display if VCR 
timer recording have been set.
TIMER RECORDING
When pressing [L] at 
the current date, the 
date will change as 
follows.
e.g.) January 1st
E9KGAUD_D-VR610KU_EN.indd   39 E9KGAUD_D-VR610KU_EN.indd   39 2007/12/18   17:10:13
2007/12/18   17:10:13  
						

							Downloaded from www.Manualslib.com manuals search engine 40 EN40 EN
Checking, canceling, or correcting the timer 
programming informationIf the timer program did not complete correctly, 
the error number appears in the timer pro-
gramming list.
1) Press [TIMER SET].
2) Press [TIMER PROG.].
3) Check the information on the list you want to edit.
Timer Programming1/1
TUE JAN/01 10:00AM
SP  (1:00) JAN/  2/08  12:00 AM L1 SP
   Date  Start  End  L1/L2
   JAN/02  12:00AM  1:00AM  L1
 New  Program
4-A)  To delete the timer program:
1 Use [K /  L] to select the program you want to 
delete, then press [ENTER].
2 Use [K /  L] to select “Delete”, then press 
[ENTER].
  Selection menu will appear.
3 Use [K /  L] to select “Yes”, then press [ENTER].
4-B)  To correct the timer program: 1 Use [K /  L] to select the program you want to 
correct, then press [ENTER].
2 Use [K /  L] to select “Program Change”, then 
press [ENTER]. 
3 Correct the timer program by using [K  / L  / {  / B], then press [ENTER].
5)  Press [TIMER PROG.] to exit.
6)  Press [TIMER SET] to return to the timer standby  mode.
Timer Programming
1/1
TUE JAN/01 10:00AM
   Date  Start  End  L1/L2
 E40  JAN/02  12:00AM  1:00AM  L1
 New 
Program
Each error number means:
E1-22 
E37-39Recording error other 
than below E40 Some portion has 
not been recorded 
because of program 
overlapping. 
Recording did not 
start at the start time.
E23-24 Unrecordable disc
E25-28
Copy prohibited program
E29 Disc protected E41 Power failed
E30 Disc full E42
No disc when recording
E31-32 Already 99 titles 
recorded E43 Already 49 titles 
recorded
E33 Already 999 chapters  recorded E44 Already 254 chapters 
recorded
E34 No space for Control  information E45 Copy prohibited 
program
E35 PCA full *1 E46 I
t is impossible to 
record additionally 
on a disc recorded 
by other units 
when setting 
“Make Recording 
Compatible” to “OFF”.
E36 Already finalized  video format disc
•  A program with the error number is grayed in the timer 
programming list.
•  Once the timer programming list with error line(s) is  displayed, or after canceling and setting again the timer 
standby mode, the program line(s) with error will be 
cleared.
*1 PCA is a disc's space reserved for recording test.
Note
• Press  [TIMER PROG.] to check the timer recording in 
progress.
  When the timer recording is proceeding, that  program will be highlighted in red. In this case, you 
cannot select any other program.
To stop the timer recording in progress
TIMER RECORDING
Press [STOP C] to stop the disc recording or 
[C  STOP/A  EJECT] to stop the cassette tape recording 
on the front panel of the unit.
[STOP  C] on the remote control is not effective.
E9KGAUD_D-VR610KU_EN.indd   40 E9KGAUD_D-VR610KU_EN.indd   40 2007/12/18   17:10:14
2007/12/18   17:10:14