Toshiba Bsa4tp User Manual

2. PRINTER SETUP ENGLISH VERSION EO1-33048 
2.8 Installing the Printer Drivers
 
E2-38 
(8)  Select “Search for the best driver for your device. (Recommended)”. 
  Mark the “Specify a location” checkbox, then click on the  [Browse] button. 
 Specify “ \driver\WinMe-9x ” folder, then click on the  [Next] button. 
 
 
 
(9)  Check to see that the “ TEC B-SA4T” driver is detected, then click on the  [Next] button. 
  
  

2. PRINTER SETUP ENGLISH VERSION EO1-33048 
2.8 Installing the Printer Drivers
 
E2-39 
(10) Change the printer name if necessary, and select  whether or not you use the printer as the default 
printer (“Yes” or “No”).  Click on the  [Finish] button. 
  
 
(11) When the screen, which indicates TEC B-SA4T h as been installed, is displayed, click on the 
[Finish]  button. 
  
 
(12) When installation is completed, the new  printer icon is added in the “Printers” folder.  

2. PRINTER SETUP ENGLISH VERSION EO1-33048 
2.8 Installing the Printer Drivers
 
E2-40 
 
   
 
(1)  Log on to your host computer as a member who has full control access privilege concerning the printer settings. 
(2)  Turn the printer ON, then connect it to  your host computer with the USB cable. 
(3)  “USB Device” is automatically detected, and “U SB Printing Support” is automatically installed. 
(4)  After a while, for Windows XP, “ TEC B-SA4T” is detected as a new device.   
  For Windows 2000,...

2. PRINTER SETUP ENGLISH VERSION EO1-33048 
2.8 Installing the Printer Drivers
 
E2-41 
(6)  Select “Search for the best  driver in these locations”. 
  Mark the “Include this location in  the search” checkbox, then click on the  [Browse] button. 
  Specify the “ \driver\WinXP-2000 ” folder in the CD-ROM, then click on the  [Next] button. 
  
 
(7)  When the dialog box below is displayed, click on the  [Continue Anyway] button. 
   

2. PRINTER SETUP ENGLISH VERSION EO1-33048 
2.8 Installing the Printer Drivers
 
E2-42 
(8)  When the “Completing the Found New Hardware  Wizard” screen is displayed, click on the 
[Finish]  button.   
 
 
(9)  When installation is completed, the new pr inter icon is added in the “Printers” folder.  

2. PRINTER SETUP ENGLISH VERSION EO1-33048 
2.8 Installing the Printer Drivers
 
E2-43 
2.8.4.  Uninstalling the Printer Driver 
 
 
 
 
 
   (1)  Select “Settings” – “Printers” from the  “Start” menu to open the printer folder. 
(2)  Right-click on the printer driver icon to be delete d, then select “Delete”.  The confirmation message is 
displayed. 
(3)  Click on the  [Yes] button to delete.   
(4)  After the printer driver icon is deleted, restart your host computer. 
 
  
(1)  Log on to your host...

2. PRINTER SETUP ENGLISH VERSION EO1-33048 
2.8 Installing the Printer Drivers
 
E2-44 
2.8.5  Adding/Deleting a LAN Port 
To use the LAN interface, first, you have to make the following settings in “  IP ADDRESS” in the system 
mode of the printer. (Refer to  Section 2.7.3) 
•  Set the printer IP address (“ PRINTER IP ADRES”), the gateway IP address (“ GATEWAY IP 
ADRES ”), and subnet mask (“ SUBNET MASK”). 
•  Set the port number (“ SOCKET PORT”). 
 
Among these settings, the printer IP address and...

2. PRINTER SETUP ENGLISH VERSION EO1-33048 
2.8 Installing the Printer Drivers
 
E2-45 
 
(1)  Right-click on the printer icon.  Select “Prope rties” to open the printer “Properties” dialog box. 
(2)  Select the “Ports” tab, and click on the  [Add Port…] button.  The “Printer Ports” dialog box is 
displayed. 
(3)  Select “Seagull Scientific TCP/IP Port” from th e “Available Printer Ports” list, then click on the [OK] 
button. 
(4)  On the “Add Seagull TCP/IP Port” dialog box, enter the name or IP...

2. PRINTER SETUP ENGLISH VERSION EO1-33048 
2.8 Installing the Printer Drivers
 
E2-46 
2.8.6 Cautions 
(1)  Printer Driver Upgrades  
•   To upgrade the printer driver to this version, uninsta ll the previous version of the printer driver, before 
installing this printer driver. 
•   Be sure to restart your host computer, after you upgrade the printer driver. 
•   When your operating system is Windows 95, Windows  98, or Windows Me, be sure to restart your host 
computer, after you uninstall the...

2. PRINTER SETUP ENGLISH VERSION EO1-33048 
2.8 Installing the Printer Drivers
 
E2-47 
2.8.7  Using the Printer Driver  
For how to use the Printer Driver, please refer  to the Help for Windows Printer Drivers screen. 
 
1)  Open the Properties screen of the Printer Driver.  
2)  Clicking on the  About tab causes the following screen to appear. 
  Click on the  [Help] button. 
 
3)  The Help for Windows Printer Drivers screen appears.   This screen will provide how to use the printer 
driver.  
 
About...