Toshiba Bex4t2g Manual

							2. PRINTER SETUP ENGLISH VERSION EO1-33094  
2.7 Installing the Printer Drivers
 
    E2-47
 
(13) Select whether or not to share the printer wit h 
other  users  on  the  network,  then  click  the  
[Next] button.   
         
(14) Select  whether  or  not  to  perform  a  print  test,  
then click the [Next] button.  
       
 
   
(15) When  the  “Completing  the  Add  Printer  Wizard” is displayed, click the [Finish] button. 
             
						

							2. PRINTER SETUP ENGLISH VERSION EO1-33094  
2.7 Installing the Printer Drivers
 
    E2-48
 
(16) When  the  screen  on  the  right  appears,  click 
the [Continue Anyway] button.   
Note : “Digital Signature Not Found” 
message may be displayed.  In this  
case, click the [Yes] button.  
       
(17) Installation of the printer driver will start.   
(18) When the installation is completed, a new prin ter icon will be added to the “Printer” folder. 
 
   
						

							2. PRINTER SETUP ENGLISH VERSION EO1-33094  
2.7 Installing the Printer Drivers
 
    E2-49
 
2.7.6   Installation under Windows Vista/Server2008/ 7/Server2008R2 
(1)  Turn on the PC. 
Note : Log on as a user with administrative privilege. 
   
(2)  Select “Start”, “Control Panel”, “Hardware and  Sound”, and “Printer” to open the printer folder. 
Supplement :  Entering “Printer” in the Search box of the Start  menu causes the “Printer” to 
be shown in the Program List.  
 
(3)  Click the “Install a Printer” to start adding a  printer.  
  
(4)  Select the “Add a local printer”.    
        
(5)  Select  a  printer  port,  and  click  the  [Next]  
button.  
        
						

							2. PRINTER SETUP ENGLISH VERSION EO1-33094  
2.7 Installing the Printer Drivers
 
    E2-50
 
(6)  When the screen on the right appears, select   
  “TOSHIBA TEC” from the Manufacturer list.  
          
(7)  The  list  of  the  installable  printer  models  is  displayed.  
          
(8)  Select the model to be installed, then click th e [Next] button.  
  
(9)  Select  the  “Replace  the  current  driver”,  and  click the [Next] button.   
Supplement :  This  step  will  be  omitted 
when  the  printer  driver  is  
installed for the first time. 
           
						

							2. PRINTER SETUP ENGLISH VERSION EO1-33094  
2.7 Installing the Printer Drivers
 
    E2-51
 
 
(10) Select  whether  or  not  to  use  the  printer  as  a  default printer, then click the [Next] button. 
 
       
(11) Installation will start.  
(12) When the installation is completed, the “Add  Printer” screen is displayed.  At this time, a  
new printer icon is added to the “Printer” 
folder.  Click the [Finish] button.   
If you want to perform a print test, click the 
[Print a test page] button.   
    
						

							2. PRINTER SETUP ENGLISH VERSION EO1-33094  
2.7 Installing the Printer Drivers
 
    E2-52
 
2.7.7   Installation under Windows 2000 (USB with Pl ug & Play Enabled) 
(1)  Turn on the PC.  
Note : Log on as a user with administrative privilege. 
   
(2)  Turn on the printer and connect it to the PC wi th a USB cable.  
  
(3)  “USB DEVICE” is detected and “USB Print support ” is automatically installed.  
 
(4)  The “Found New Hardware Wizard” will be  displayed.  (This may not appear  
immediately.) 
Click the [Next] button.  
          
(5)  Select the “Search for a suitable driver for my  
device  (recommended)”,  and  click  the  [Next]  
button.  
         
(6)  Check the “Specify a location” checkbox, then  click the [Next] button.  
 
     
						

							2. PRINTER SETUP ENGLISH VERSION EO1-33094  
2.7 Installing the Printer Drivers
 
    E2-53
 
(7)  Click the [Browse] button.  Specify the folder   
  (C:\TEC_DRV)  created  in  Section  2.7.4,  and 
click the [Next] button.  
 
    
(8)  Make  sure  the  driver  of  this  device  has  been  detected, then click the [Next] button.    
       
(9)  When  the  screen  on  the  right  is  displayed,  click the [Yes] button.  
   
       
(10) When  “Completing  the  Found  New  Hardware  Wizard”  is  displayed,  click  the  
[Finish] button.  
        
(11) When the installation is completed, a new prin ter icon is added to the Printer folder.  
      
						

							2. PRINTER SETUP ENGLISH VERSION EO1-33094  
2.7 Installing the Printer Drivers
 
    E2-54
 
2.7.8  Installation under Windows XP/Server2003 (USB  with Plug & Play enabled) 
(1)  Turn on the PC. 
Note : Log on as a user with administrative privilege.    
  
(2)  Turn on the printer, and connect it to the PC w ith a USB cable.    
 
(3)  “USB DEVICE” is detected, and the “USB Print Su pport” is automatically installed.  
 
(4)  The device will automatically be detected.    
(5)  When  “Found  New  Hardware  Wizard”  is  displayed, select “Install  from  a  list  or  specific  
location  [Advanced]”  and  click  the  [Next] 
button.  
        
 
(6)  Select the “Search for the best driver in these  
locations”.  Check the “Include this location in  
the search” checkbox, and click the [Browse] 
button.  
Specify the folder (C:\TEC_DRV) created in  
Section 2.7.4 , and click the [Next] button.  
 
      
(7)  When  the  screen  on  the  right  appears,  click 
the [Continue Anyway] button.  
            
						

							2. PRINTER SETUP ENGLISH VERSION EO1-33094  
2.7 Installing the Printer Drivers
 
    E2-55
 
(8)  When “Completing the Found New Hardware   
  Wizard” is displayed, click the [Finish] button. 
         
(9)  When the installation is completed, a new print er icon is added to the Printer folder.  
   
2.7.9  Installation under Windows Vista/Server  2008/ 7/Server2008R2  (USB  with  Plug  & 
Play Enabled) 
(1)  Turn on the PC.  
Note : Log on as a user with administrative privilege.    
 
(2)  Turn on the printer and connect it to the PC wi th a USB cable.  
 
(3)  Installation of the device driver software is a utomatically started.   
 
(4)  After a short time, the printer driver installa tion will be completed.  
 
(5)  When the installation is completed, a new print er icon is added to the Printer folder.  
   
						

							2. PRINTER SETUP ENGLISH VERSION EO1-33094  
2.7 Installing the Printer Drivers
 
    E2-56
 
2.7.10  Uninstalling the Printer Driver 
1) To delete the printer drivers except for V6.5 Bu ild75 and V6.5 Build77 
In the following cases, be sure to uninstall the pr inter driver using the procedure below.  
 When the same version is going to be re-installed.   
 When an older version has been already installed.  
 When  the  installation  is  canceled  before  being  comp leted,  or  when  the  [No]  is  selected  at  a 
confirmation of the digital signature. 
  When the printer driver cannot be installed for som e reason.  
 
Notes : 1.  When installing the printer driver with Plug &  Play enabled, turn OFF the printer first.  
  2  When  the  printer  driver  is  deleted,  the  informat ion  for  any  registered  stocks  and  bar 
codes will also be deleted.  This information can  b e  saved  in  a  file,  before  beginning  this 
process,  by  using  the  export  function,  and  restored   by  using  the  import  function  after  re-
installation of the printer driver.  
 



 Deleting the printer drivers except for V7.2 M-2 
Before  deleting  the  printer  driver,  except  for  V7.2   M-2,  follow  the  procedure  described  in Section 
2.7.4  Preparation  for  Installation .   Doing  this  causes  the  previously  installed  printer  driver  to  be 
updated  and  creates  a  shortcut  of  the  Driver  Wizard   in  the  TPCL  Printer  Driver  of  TOSHIBA  TEC 
folder.     
It  is  not  possible  to  update  a  printer  driver  which   is  older  than  V6.9.3  M-0.    For  such  versions,  firs t 
delete the “C:\TEC_DRV” folder, then perform the Pr eparation for Installation procedure.  When the 
preparation  is  completed,  the  shortcut  of  the  “Driv er  Wizard”  is  created  in  the  TPCL  Printer  Driver 
folder.  
  



 How to uninstall the printer driver  
(1)  Select  the  “Start”,  “All  programs”,  “TOSHIBA 
TEC”,  “TPCL  Printer  Driver”,  and  “Driver 
Wizard”.  
Note : Log  on  as  a  user  with  administrative 
privilege.   
Exit  all  Windows  applications  before 
performing  the  above  operation.  
Confirm  that  there  are  no  print  jobs  in 
the  spooler,  then  close  the  spooler  and 
the printer folder.  
In the case of Windows Vista/Server 
2008/7/Server2008R2, the User Account 
Control screen may appear.  In this case, 
click [Allow].  
   
(2)  Select  the  “Remove  printer  drivers”,  and  click the [Next] button.