Toshiba B Sa4t G Manual
Have a look at the manual Toshiba B Sa4t G Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 566 Toshiba manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 116
- 113 -
< 6 > R A M C L E A R
P A R A M E T E R C L E A R(19) Parameter clear mode
[PAUSE]
(20) Press the [PAUSE] key.
< 6 > R A M C L E A R
* * * Q M T Y P E * * *(21) RAM clear for the QM type
[FEED]
(22) Press the [FEED] key.
< 6 > R A M C L E A R
* * * J A T Y P E * * *(23) RAM clear for the JA type
[PAUSE]
(24) Press the [PAUSE] key.
< 6 > R A M C L E A...](http://img.usermanuals.tech/thumb/76/103590/w64_b-sa4t-g-manual-1513609621_d-115.png "Page 116
- 113 -
< 6 > R A M C L E A R
P A R A M E T E R C L E A R(19) Parameter clear mode
[PAUSE]
(20) Press the [PAUSE] key.
< 6 > R A M C L E A R
* * * Q M T Y P E * * *(21) RAM clear for the QM type
[FEED]
(22) Press the [FEED] key.
< 6 > R A M C L E A R
* * * J A T Y P E * * *(23) RAM clear for the JA type
[PAUSE]
(24) Press the [PAUSE] key.
< 6 > R A M C L E A...")
![Page 117
- 114 - 6.7.2 Details of RAM Clear
(1) RAM clear mode
• NO RAM CLEAR
• MAINTE.CNT CLEAR
• PARAMETER CLEAR
(2) Destination type
• QM TYPE (for North/South America/Europe/Asia/China)
• JA TYPE (for Japan)
(3) Supplementary explanations
• When the [FEED] and [RESTART] keys are pressed at the same time, the display shows
the system mode menu.
• When “COMPLETE” is displayed after a RAM clear is complete, turn off the power.
• The total label distance covered,...](http://img.usermanuals.tech/thumb/76/103590/w64_b-sa4t-g-manual-1513609621_d-116.png "Page 117
- 114 - 6.7.2 Details of RAM Clear
(1) RAM clear mode
• NO RAM CLEAR
• MAINTE.CNT CLEAR
• PARAMETER CLEAR
(2) Destination type
• QM TYPE (for North/South America/Europe/Asia/China)
• JA TYPE (for Japan)
(3) Supplementary explanations
• When the [FEED] and [RESTART] keys are pressed at the same time, the display shows
the system mode menu.
• When “COMPLETE” is displayed after a RAM clear is complete, turn off the power.
• The total label distance covered,...")
![Page 121
- 118 -
6.8 IP ADDRESS SETTING
6.8.1 IP Address Setting Operation Example
Power OFF (1) Power off state
[FEED] [PAUSE] (2) While holding the [FEED] and [PAUSE] keys
down, turn the power on.
< 1 > D I A G . V 1 . 2 A
(3) The self-test menu is displayed.
[FEED]
(4) Press the [FEED] key.
< 2 > P A R A M E T E R S E T
(5) System mode menu display
(Parameter setting)
[FEED]...](http://img.usermanuals.tech/thumb/76/103590/w64_b-sa4t-g-manual-1513609621_d-120.png "Page 121
- 118 -
6.8 IP ADDRESS SETTING
6.8.1 IP Address Setting Operation Example
Power OFF (1) Power off state
[FEED] [PAUSE] (2) While holding the [FEED] and [PAUSE] keys
down, turn the power on.
< 1 > D I A G . V 1 . 2 A
(3) The self-test menu is displayed.
[FEED]
(4) Press the [FEED] key.
< 2 > P A R A M E T E R S E T
(5) System mode menu display
(Parameter setting)
[FEED]...")
![Page 122
- 119 -
< 7 > I P A D D R E S S
G A T E W A Y I P A D R E S(19) Gateway IP address setting mode
[RESTART]
(20) Press the [RESTART] key.
< 7 > I P A D D R E S S
S U B N E T M A S K (21) Subnet mask setting mode
[RESTART]
(22) Press the [RESTART] key.
< 7 > I P A D D R E S S
S O C K E T P O R T (23) Socket port number setting mode
[RESTART]
(24) Press the [RESTART] key....](http://img.usermanuals.tech/thumb/76/103590/w64_b-sa4t-g-manual-1513609621_d-121.png "Page 122
- 119 -
< 7 > I P A D D R E S S
G A T E W A Y I P A D R E S(19) Gateway IP address setting mode
[RESTART]
(20) Press the [RESTART] key.
< 7 > I P A D D R E S S
S U B N E T M A S K (21) Subnet mask setting mode
[RESTART]
(22) Press the [RESTART] key.
< 7 > I P A D D R E S S
S O C K E T P O R T (23) Socket port number setting mode
[RESTART]
(24) Press the [RESTART] key....")
![Page 123
- 120 -
< 7 > I P A D D R E S S
1 9 0 . 1 6 8 . 0 1 0 . 0 1 0(37) Setting for the first 8 bits
[FEED] • • • • •
(38) Press the [FEED] key.
< 7 > I P A D D R E S S
1 5 7 . 1 6 8 . 0 1 0 . 0 1 0(39) Setting for the first 8 bits
[PAUSE]
(40) Press the [PAUSE] key.
< 7 > I P A D D R E S S
1 5 7 . 1 6 7 . 0 1 0 . 0 1 0(41) The first 8 bits are entered and the setting goes
on to the next 8 bits.
[FEED]
(42)...](http://img.usermanuals.tech/thumb/76/103590/w64_b-sa4t-g-manual-1513609621_d-122.png "Page 123
- 120 -
< 7 > I P A D D R E S S
1 9 0 . 1 6 8 . 0 1 0 . 0 1 0(37) Setting for the first 8 bits
[FEED] • • • • •
(38) Press the [FEED] key.
< 7 > I P A D D R E S S
1 5 7 . 1 6 8 . 0 1 0 . 0 1 0(39) Setting for the first 8 bits
[PAUSE]
(40) Press the [PAUSE] key.
< 7 > I P A D D R E S S
1 5 7 . 1 6 7 . 0 1 0 . 0 1 0(41) The first 8 bits are entered and the setting goes
on to the next 8 bits.
[FEED]
(42)...")
![Page 124
- 121 -
[RESTART]
(56) Press the [RESTART] key.
< 7 > I P A D D R E S S
1 5 7 . 0 6 9 . 0 1 3 . 0 1 0(57) Setting for the next 8 bits
[RESTART] • • • • •
(58) Press the [RESTART] key.
< 7 > I P A D D R E S S
1 5 7 . 0 6 9 . 0 4 6 . 0 1 0(59) Setting for the next 8 bits
[PAUSE]
(60) Press the [PAUSE] key.
< 7 > I P A D D R E S S
1 5 7 . 0 6 9 . 0 4 6 . 0 1 0(61) The 8 bits are entered and the setting goes...](http://img.usermanuals.tech/thumb/76/103590/w64_b-sa4t-g-manual-1513609621_d-123.png "Page 124
- 121 -
[RESTART]
(56) Press the [RESTART] key.
< 7 > I P A D D R E S S
1 5 7 . 0 6 9 . 0 1 3 . 0 1 0(57) Setting for the next 8 bits
[RESTART] • • • • •
(58) Press the [RESTART] key.
< 7 > I P A D D R E S S
1 5 7 . 0 6 9 . 0 4 6 . 0 1 0(59) Setting for the next 8 bits
[PAUSE]
(60) Press the [PAUSE] key.
< 7 > I P A D D R E S S
1 5 7 . 0 6 9 . 0 4 6 . 0 1 0(61) The 8 bits are entered and the setting goes...")
![Page 125
- 122 -
< 7 > I P A D D R E S S
S U B N E T M A S K (75) Subnet mask setting mode
[PAUSE]
(76) Press the [PAUSE] key.
< 7 > I P A D D R E S S
2 5 5 . 2 5 5 . 2 5 5 . 0 0 0(77) Subnet mask display
(78) Subnet mask setting
< 7 > I P A D D R E S S
S O C K E T P O R T (79) Socket communication port setting mode
[PAUSE]
(80) Press the [PAUSE] key.
< 7 > I P A D D R E S S
P O R T...](http://img.usermanuals.tech/thumb/76/103590/w64_b-sa4t-g-manual-1513609621_d-124.png "Page 125
- 122 -
< 7 > I P A D D R E S S
S U B N E T M A S K (75) Subnet mask setting mode
[PAUSE]
(76) Press the [PAUSE] key.
< 7 > I P A D D R E S S
2 5 5 . 2 5 5 . 2 5 5 . 0 0 0(77) Subnet mask display
(78) Subnet mask setting
< 7 > I P A D D R E S S
S O C K E T P O R T (79) Socket communication port setting mode
[PAUSE]
(80) Press the [PAUSE] key.
< 7 > I P A D D R E S S
P O R T...")
![Page 126
- 123 -
< 7 > I P A D D R E S S
P O R T O N 1 7 0 0 0(93) Enter values for the 3rd to the 1st digits.
[FEED] • • • • •
[RESTART] • • • • •
(94) Set values for the 3rd to the 1st digits.
[PAUSE] • • • • •
< 7 > I P A D D R E S S
D H C P (95) DHCP setting
[PAUSE]
(96) Press the [PAUSE] key.
< 7 > I P A D D R E S S
D H C P O F F (97) DHCP setting (Disabled)...](http://img.usermanuals.tech/thumb/76/103590/w64_b-sa4t-g-manual-1513609621_d-125.png "Page 126
- 123 -
< 7 > I P A D D R E S S
P O R T O N 1 7 0 0 0(93) Enter values for the 3rd to the 1st digits.
[FEED] • • • • •
[RESTART] • • • • •
(94) Set values for the 3rd to the 1st digits.
[PAUSE] • • • • •
< 7 > I P A D D R E S S
D H C P (95) DHCP setting
[PAUSE]
(96) Press the [PAUSE] key.
< 7 > I P A D D R E S S
D H C P O F F (97) DHCP setting (Disabled)...")
- 118 -
6.8 IP ADDRESS SETTING
6.8.1 IP Address Setting Operation Example
Power OFF (1) Power off state
[FEED] [PAUSE] (2) While holding the [FEED] and [PAUSE] keys
down, turn the power on.
< 1 > D I A G . V 1 . 2 A
(3) The self-test menu is displayed.
[FEED]
(4) Press the [FEED] key.
< 2 > P A R A M E T E R S E T
(5) System mode menu display
(Parameter setting)
[FEED]
(6) Press the [FEED] key.
< 3 > A D J U S T S E T
(7) System mode menu display
(Fine adjustment value setting)
[FEED]
(8) Press the [FEED] key.
< 4 > T E S T P R I N T
(9) System mode menu display
(Test print)
[FEED]
(10) Press the [FEED] key.
< 5 > S E N S O R A D J .
(11) System mode menu display
(Sensor display/adjustment)
[FEED]
(12) Press the [FEED] key.
< 6 > R A M C L E A R
(13) System mode menu display
(RAM clear)
[FEED]
(14) Press the [FEED] key.
< 7 > I P A D D R E S S
(15) System mode menu display
(IP address setting)
[PAUSE]
(16) Press the [PAUSE] key.
< 7 > I P A D D R E S S
P R I N T E R I P A D R E S(17) Printer IP address setting mode
[RESTART]
(18) Press the [RESTART] key.
- 119 -
< 7 > I P A D D R E S S
G A T E W A Y I P A D R E S(19) Gateway IP address setting mode
[RESTART]
(20) Press the [RESTART] key.
< 7 > I P A D D R E S S
S U B N E T M A S K (21) Subnet mask setting mode
[RESTART]
(22) Press the [RESTART] key.
< 7 > I P A D D R E S S
S O C K E T P O R T (23) Socket port number setting mode
[RESTART]
(24) Press the [RESTART] key.
< 7 > I P A D D R E S S
D H C P (25) DHCP function setting mode
[PAUSE]
(26) Press the [PAUSE] key.
< 7 > I P A D D R E S S
D H C P C L I E N T I D(27) DHCP client ID setting mode
[PAUSE]
(28) Press the [PAUSE] key.
< 7 > I P A D D R E S S
D H C P H O S T N A M E(29) DHCP host name setting mode
[PAUSE]
(30) Press the [PAUSE] key.
< 7 > I P A D D R E S S
P R I N T E R I P A D R E S(31) Printer IP address setting mode
[PAUSE]
(32) Press the [PAUSE] key.
< 7 > I P A D D R E S S
1 9 2 . 1 6 8 . 0 1 0 . 0 1 0(33) Printer IP address display
[FEED]
(34) Press the [FEED] key.
< 7 > I P A D D R E S S
1 9 1 . 1 6 8 . 0 1 0 . 0 1 0(35) Setting for the first 8 bits
[FEED]
(36) Press the [FEED] key.
- 120 -
< 7 > I P A D D R E S S
1 9 0 . 1 6 8 . 0 1 0 . 0 1 0(37) Setting for the first 8 bits
[FEED] • • • • •
(38) Press the [FEED] key.
< 7 > I P A D D R E S S
1 5 7 . 1 6 8 . 0 1 0 . 0 1 0(39) Setting for the first 8 bits
[PAUSE]
(40) Press the [PAUSE] key.
< 7 > I P A D D R E S S
1 5 7 . 1 6 7 . 0 1 0 . 0 1 0(41) The first 8 bits are entered and the setting goes
on to the next 8 bits.
[FEED]
(42) Press the [FEED] key.
< 7 > I P A D D R E S S
1 5 7 . 1 6 7 . 0 1 0 . 0 1 0(43) Setting for the next 8 bits
[FEED]
(44) Press the [FEED] key.
< 7 > I P A D D R E S S
1 5 7 . 1 6 6 . 0 1 0 . 0 1 0(45) Setting for the next 8 bits
[PAUSE]
(46) Press the [PAUSE] key.
< 7 > I P A D D R E S S
1 5 7 . 1 6 5 . 0 1 0 . 0 1 0(47) Setting for the next 8 bits
[FEED] • • • • •
(48) Press the [FEED] key.
< 7 > I P A D D R E S S
1 5 7 . 0 6 9 . 0 1 0 . 0 1 0(49) Setting for the next 8 bits
[PAUSE]
(50) Press the [PAUSE] key.
< 7 > I P A D D R E S S
1 5 7 . 0 6 9 . 0 1 0 . 0 1 0(51) The 8 bits are entered and the setting goes on
to the next 8 bits.
[RESTART]
(52) Press the [RESTART] key.
< 7 > I P A D D R E S S
1 5 7 . 0 6 9 . 0 1 1 . 0 1 0(53) Setting for the next 8 bits
[RESTART]
(54) Press the [RESTART] key.
< 7 > I P A D D R E S S
1 5 7 . 0 6 9 . 0 1 2 . 0 1 0(55) Setting for the next 8 bits
- 121 -
[RESTART]
(56) Press the [RESTART] key.
< 7 > I P A D D R E S S
1 5 7 . 0 6 9 . 0 1 3 . 0 1 0(57) Setting for the next 8 bits
[RESTART] • • • • •
(58) Press the [RESTART] key.
< 7 > I P A D D R E S S
1 5 7 . 0 6 9 . 0 4 6 . 0 1 0(59) Setting for the next 8 bits
[PAUSE]
(60) Press the [PAUSE] key.
< 7 > I P A D D R E S S
1 5 7 . 0 6 9 . 0 4 6 . 0 1 0(61) The 8 bits are entered and the setting goes on
to the next 8 bits.
[RESTART]
(62) Press the [RESTART] key.
< 7 > I P A D D R E S S
1 5 7 . 0 6 9 . 0 4 6 . 0 1 1(63) Setting for the next 8 bits
[RESTART]
(64) Press the [RESTART] key.
< 7 > I P A D D R E S S
1 5 7 . 0 6 9 . 0 4 6 . 0 1 2(65) Setting for the next 8 bits
[RESTART]
(66) Press the [RESTART] key.
< 7 > I P A D D R E S S
1 5 7 . 0 6 9 . 0 4 6 . 0 1 3(67) Setting for the next 8 bits
[RESTART] • • • • •
(68) Press the [RESTART] key.
< 7 > I P A D D R E S S
1 5 7 . 0 6 9 . 0 4 6 . 1 2 4(69) Setting for the next 8 bits
[PAUSE]
(70) Press the [PAUSE] key.
< 7 > I P A D D R E S S
G A T E W A Y I P A D R E S(71) Gateway IP address setting mode
[PAUSE]
(72) Press the [PAUSE] key.
< 7 > I P A D D R E S S
0 0 0 . 0 0 0 . 0 0 0 . 0 0 0(73) Gateway IP address display
(74) Gateway IP address setting
- 122 -
< 7 > I P A D D R E S S
S U B N E T M A S K (75) Subnet mask setting mode
[PAUSE]
(76) Press the [PAUSE] key.
< 7 > I P A D D R E S S
2 5 5 . 2 5 5 . 2 5 5 . 0 0 0(77) Subnet mask display
(78) Subnet mask setting
< 7 > I P A D D R E S S
S O C K E T P O R T (79) Socket communication port setting mode
[PAUSE]
(80) Press the [PAUSE] key.
< 7 > I P A D D R E S S
P O R T O F F - - - - -(81) Socket communication setting (Disabled)
[RESTART]
(82) Press the [RESTART] key.
< 7 > I P A D D R E S S
P O R T O N 0 8 0 0 0(83) Socket communication setting (Enabled)
[PAUSE]
(84) Press the [PAUSE] key.
< 7 > I P A D D R E S S
P O R T O N 0 8 0 0 0(85) Set a value for the 5th digit.
[RESTART]
(86) Press the [RESTART] key.
< 7 > I P A D D R E S S
P O R T O N 1 8 0 0 0(87) Confirm a set value for the 5th digit.
[PAUSE]
(88) Press the [PAUSE] key.
< 7 > I P A D D R E S S
P O R T O N 1 8 0 0 0(89) Set a value for the 4th digit.
[FEED]
(90) Press the [FEED] key.
< 7 > I P A D D R E S S
P O R T O N 1 7 0 0 0(91) Confirm a set value for the 4th digit.
[PAUSE]
(92) Press the [PAUSE] key.
- 123 -
< 7 > I P A D D R E S S
P O R T O N 1 7 0 0 0(93) Enter values for the 3rd to the 1st digits.
[FEED] • • • • •
[RESTART] • • • • •
(94) Set values for the 3rd to the 1st digits.
[PAUSE] • • • • •
< 7 > I P A D D R E S S
D H C P (95) DHCP setting
[PAUSE]
(96) Press the [PAUSE] key.
< 7 > I P A D D R E S S
D H C P O F F (97) DHCP setting (Disabled)
[RESTART]
(98) Press the [RESTART] key.
< 7 > I P A D D R E S S
D H C P O N (99) DHCP setting (Enabled)
[PAUSE]
(100) Press the [PAUSE] key.
< 7 > I P A D D R E S S
D H C P C L I E N T I D(101) DHCP client ID setting
[PAUSE]
(102) Press the [PAUSE] key.
M O D E A S C I I
D H C P C L I E N T I D(103) DHCP client ID input mode setting
(ASCII)*
[RESTART]
(104) Press the [RESTART] key.
M O D E H E X
D H C P C L I E N T I D(105) DHCP client ID input mode setting
(HEX)
[PAUSE]
(106) Press the [PAUSE] key.
F F F F F F F F F F F F F F F F
F F F F F F F F F F F F F F F F(107) Input the DHCP client ID. (HEX)
[RESTART]
(108) Press the [RESTART] key.
0 0 F F F F F F F F F F F F F F
F F F F F F F F F F F F F F F F(109) Input the DHCP client ID.
(HEX: 1st byte)
[RESTART]
(110) Press the [RESTART] key.
- 124 -
0 1 F F F F F F F F F F F F F F
F F F F F F F F F F F F F F F F(111) Input the DHCP client ID.
(HEX: 1st byte)
[PAUSE]
(112) Press the [PAUSE] key.
0 1 F F F F F F F F F F F F F F
F F F F F F F F F F F F F F F F(113) Input the DHCP client ID.
(HEX: 2nd byte)
[FEED]
(114) Press the [FEED] key.
0 1 F E F F F F F F F F F F F F
F F F F F F F F F F F F F F F F(115) Input the DHCP client ID.
(HEX: 2nd byte)
[FEED]
(116) Press the [FEED] key.
0 1 F D F F F F F F F F F F F F
F F F F F F F F F F F F F F F F(117) Input the DHCP client ID.
(HEX: 2nd byte)
[FEED] • • • • •
[RESTART] • • • • •
[PAUSE] • • • • •
(118) Input the DHCP client ID.
(HEX: 2nd to 16 th bytes)
M O D E A S C I I(119) Input the DHCP host name.
D H C P H O S T N A M E
[PAUSE]
(120) Press the [PAUSE] key.
M O D E A S C I I
■ ■ ■ ■ ■ ■ ■ ■■ ■ ■ ■ ■ ■■■
[FEED] • • • • • (121) DHCP HOST NAME input mode setting
(ASCII) *
[RESTART] • • • • •
[PAUSE] • • • • •
(122) Press the [RESTART] key.
< 7 > I P A D D R E S S
(123) End of IP address setting
NOTE: When the input mode for DHCP client ID and DHCP HOST NAME is ASCII, each byte of
data is an ASCII character. Termination is FHH. It is “FF” in HEX mode and “■” before
the space in ASCII mode.
- 125 - 6.8.2 IP Address Setting Operation Flow [PAUSE] PRINTER IP ADRES GATEWAY IP ADRES SUBNET MASK [RESTART] [FEED] [RESTART] [FEED] [FEED] [RESTART] 000.000.000.000 [RESTART] [FEED] 001.000.000.000 002.000.000.000 [RESTART] 255.000.000.000 254.000.000.000 [FEED] [FEED] [FEED] [FEED] [FEED] [RESTART] [RESTART] [RESTART] [RESTART] 000.000.000.000 [RESTART] [FEED] 000.001.000.000 000.002.000.000 [RESTART] 000.255.000.000 000.254.000.000 [FEED] [FEED] [FEED] [FEED] [FEED] [RESTART] [RESTART] [RESTART] [RESTART] [PAUSE] SOCKET PORT [FEED] [RESTART] DHCP [FEED] [RESTART] DHCP CLIENT ID [RESTART] [FEED] [RESTART] [FEED] DHCP HOST NAME
- 126 -
6.9 BASIC SETTING
6.9.1 BASIC Setting Operation Example
Power OFF (1) Power off state
[FEED] [PAUSE] (2) While holding the [FEED] and [PAUSE] keys
down, turn the power on.
< 1 > D I A G . V 1 . 2 A
(3) The self-test menu is displayed.
[FEED]
(4) Press the [FEED] key.
< 2 > P A R A M E T E R S E T
(5) System mode menu display
(Parameter setting)
[FEED]
(6) Press the [FEED] key.
< 3 > A D J U S T S E T
(7) System mode menu display
(Fine adjustment value setting)
[FEED]
(8) Press the [FEED] key.
< 4 > T E S T P R I N T
(9) System mode menu display
(Test print)
[FEED]
(10) Press the [FEED] key.
< 5 > S E N S O R A D J .
(11) System mode menu display
(Sensor display/adjustment)
[FEED]
(12) Press the [FEED] key.
< 6 > R A M C L E A R
(13) System mode menu display
(RAM clear)
[FEED]
(14) Press the [FEED] key.
< 7 > I P A D D R E S S
(15) System mode menu display
(IP address setting)
[FEED]
(16) Press the [FEED] key.
< 8 > B A S I C
(17) BASIC setting mode
[PAUSE]
(18) Press the [PAUSE] key.
- 127 -
< 8 > B A S I C
B A S I C E N A B L E (19) BASIC enable setting mode
[RESTART]
(20) Press the [RESTART] key.
< 8 > B A S I C
F I L E M A I N T E N A N C E(21) BASIC file browser
[RESTART]
(22) Press the [RESTART] key.
< 8 > B A S I C
B A S I C T R A C E (23) BASIC trace setting
[RESTART]
(24) Press the [RESTART] key.
< 8 > B A S I C
E X P A N D M O D E (25) BASIC expansion mode
[RESTART]
(26) Press the [RESTART] key.
< 8 > B A S I C
B A S I C E N A B L E (27) BASIC enable setting mode
[PAUSE]
(28) Press the [PAUSE] key.
< 8 > B A S I C
B A S I C O F F (29) BASIC is disabled.
[FEED]
(30) Press the [FEED] key.
< 8 > B A S I C
B A S I C O N (31) BASIC is enabled.
[PAUSE]
(32) Press the [PAUSE] key.
< 8 > B A S I C
F I L E M A I N T E N A N C E(33) BASIC file browser
[PAUSE]
(34) Press the [PAUSE] key.
< 8 > B A S I C
0 0 T E S T . B A S (35) Program file display
[RESTART]
(36) Press the [RESTART] key.