Tone Commander T6220t-Tsg User Manual

							58Tone Commander 6220T-TSG User Manual
Appendix A
Ordering ISDN Service
Setup Wizard
The ISDN Telephone Setup Wizard simplifies ordering ISDN service.
This Windows 95/98/NT program prompts you for all required
information, and prints the service order forms and key designation
labels. You can download the Setup Wizard from Tone Commander’s
Web site at www.tonecommander.com or call Tone Commander at
(800) 524-0024 to order the program on floppy disks.
Ordering Manually
Your service provider may have their own process and forms for
ordering ISDN service. Contact them for instructions before you create
your order.
Key Assignments
The 6220T-TSG is compatible with all NIUF terminal packages and
many other standard line configurations. If Parameter Downloading is
available, the phone will automatically assign Feature Activator keys
and codes to match almost any line configuration. Call appearances
are always assigned in ascending order, starting with button #1.
Feature activators are assigned in descending order, starting with
button #20.
Use the table on the following page as a guide when assigning custom
feature activators and indicators.
Where to Go for Help
If you need assistance ordering service, call Tone Commander
Customer Technical Support at (800) 524-0024. 
						

							Tone Commander 6220T-TSG User Manual59
Recommended Button Assignments
Network
Button #Assignment
1 Call Appearance (PDN)
2 Call Appearances
3
.
.
.
.
.
.
58
59 Additional Feature Keys
60 Conference *
61 Transfer *
62 Drop *
63 Message Waiting Indicator
*National ISDN only; DO NOT assign these keys
for 5ESS Custom ISDN.
With Parameter Downloading, the phone will automatically remap
feature activators (other than Conference, Transfer, Drop, and
Message Waiting) in descending order, starting with key 20. For
example, network feature key #59 will be assigned to key 20, #58 to
key 19, etc. 
						

							60Tone Commander 6220T-TSG User Manual
Appendix B
Setup Menu Tree
INSTL  (Installation Options)
SPID  (Service Profile Identifier) ......................................  page 24
PARAM  (Parameter Download – National ISDN only).....  page 25
START  (Start Download)
AUTO  (Automatic Download Enable/Disable)
KEYS
CA/DN  (Call Appearance/Directory Number) ..........  page 25
ORIG  (Originating DN)
RESERV  (Call Appearance Reservation)
OUT  (Outgoing Only)
IN  (Incoming Only)
PRI  (Outgoing/Priority Incoming)
NOT  (Not Reserved)
FA  (Feature Activator)
DSS  (Direct Station Select)
DSS#
SPDIAL  (Speed Dial)
PAUSE  (Dialing Pause)
FA  (Feature Activator)
UNUSED
MODE  (Terminal Mode – National ISDN only) ................  page 31
CACH  (Call Appearance Call Handling EKTS)
BASIC  (Basic EKTS – National ISDN only)
PASSWD  (Installation Options Password) ......................  page 32
SET
CLEAR
RESET  (Reset to Default Settings) .................................  page 34 
						

							Tone Commander 6220T-TSG User Manual61
ADMIN  (Administration Options)
INSPCT  (Local Inspect) ..................................................  page 36
KEYS  (Call Appearance and Feature Activator Keys)
DNs  (Directory Numbers)
MESSAGE  (Message Waiting Indicator)
VERS  (Version) ..............................................................  page 39
SERIAL  (Serial Number)
H/W  (Hardware Versions)
S/W  (Software Version)
TEST ................................................................................  page 40
DISPLY  (Display and Indicators)
LCD  (Test LCD Display)
RED  (Test Red Indicators)
GREEN  (Test Green Indicators)
OFF  (Turn All Indicators Off)
KEYS  (Test Phone Keys)
DIAG  (Diagnostic Display) ..............................................  page 41
RESTART  (Restart/Clear Call Log) ................................  page 42
LOG  (Error & Parameter Download Logs) ......................  page 42
ERROR  (Error Log)
PARAM  (Parameter Download Log – Nat. ISDN only)
CLEAR  (Clear Error Log) 
						

							62Tone Commander 6220T-TSG User Manual
USER  (User Options)
CLOCK  (Set Time and Date) ..........................................  page 44
SPDIAL  (Speed Dial) ......................................................  page 44
PAUSE  (Dialing Pause)
DIR  (Call Directory)..........................................................  page 46
RING  (Personal Ringing) ................................................  page 48
TONE  (Ringing Tone)
OFFHK  (Off-Hook Ringing)
NORMAL
SINGLE  (Single Burst)
CONTROL  (Ringing Control)
ALWAYS  (Ring Immediately)
NEVER  (Never Ring)
WAIT2  (Wait 2 Ring Cycles / 12 seconds)
WAIT3  (Wait 3 Ring Cycles / 18 seconds)
WAIT4  (Wait 4 Ring Cycles / 24 seconds)
WAIT5  (Wait 5 Ring Cycles / 30 seconds)
WAIT6  (Wait 6 Ring Cycles / 36 seconds)
WAIT7  (Wait 7 Ring Cycles / 42 seconds)
PREF  (Off-hook Call Preference – National ISDN only) .  page 50
RING  (Answer Ringing Call)
IDLE  (Select Idle Call Appearance)
NONE  (Manual Call Appearance Selection)
VOICE  (Voice Mode) ......................................................  page 51
VOLUME
RCV+/-  (Handset Receive Volume Up/Down)
DISPLY  (Display Contrast) .............................................  page 51
+  (Increase Contrast)
-  (Decrease Contrast)
PASSWD (Call Log Password) ........................................  page 53
SET, CLEAR 
						

							Tone Commander 6220T-TSG User Manual63
Appendix C
Warranty and Service
Tone Commander Product Warranty
For a period of one year from date of dealer purchase, but not to
exceed 16 months from date of manufacture, Tone Commander
Systems, Inc. (Tone Commander) warrants its products to be free from
defects in material and workmanship under conditions of normal use
and service. Tone Commander shall, at its option, repair or replace any
defective product which, in its opinion, has not been misused,
damaged, or improperly installed.
Repair or replacement under this warranty will be performed at Tone
Commanders factory. Authorization must be obtained from Tone
Commander prior to returning a product for repair. Freight must be
prepaid for all units returned to Tone Commander. Units repaired under
warranty will be shipped UPS Ground (or equivalent), freight prepaid by
Tone Commander.
Products that are older than the warranty period, but less than 7 years
old, or still manufactured by Tone Commander may be repaired at the
factory for a flat rate charge. Repaired out-of-warranty units are
warranted for 90 days from the date of repair.
The repair or replacement of a product under this warranty represents
the entire obligation of Tone Commander; Tone Commander shall not
be liable for any special or consequential damages resulting from or
caused by any defect, failure, incapacity or malfunction of any of its
products.
The foregoing express warranty is in lieu of all other warranties,
express or implied, including but not limited to any implied
warranty of merchantability, fitness, or adequacy for any
purpose or use, quality, productiveness or capacity; Tone
Commander, to the extent permitted by law, hereby disclaims
all such other warranties. 
						

							64Tone Commander 6220T-TSG User Manual
Appendix D
Specifications
Contents of Shipping Container
Modular handset coil-cord
Modular line cord
Label Sheet
Handset
Manual
Quick Reference Card
Standards Compliance
ANSI T1.601-1992 and T1.605-1991
National ISDN, Lucent 5ESS Custom ISDN
FCC Part 15
FCC Part 68
Hearing Aid Compatible
FCC Part 68 Volume Control Requirements
UL, cUL Listed
TSG-6 Certification Number: TSG-0212B0103
Network Switch Compatibility
Lucent 5ESS National ISDN, Custom ISDN, Definity PABX
Nortel DMS-100 National ISDN
Siemens EWSD National ISDN
AG Communication Systems GTD-5 National ISDN
Power Requirements
PS1 (phantom) or PS2 (pins 7 and 8)
24 to 56.5 VDC @ 2 W max. per terminal (excluding wiring losses)
Physical Dimensions
8.25” W x 8.5” D x 4.75” H, including handset
Weight
2.5 lbs.
Environmental
Operating temperature: 32° to 104° F (0° to 40° C)
Storage temperature: 32° to 122° F (0° to 50° C)
Humidity: 5% to 95% non-condensing 
						

							Tone Commander 6220T-TSG User Manual65
Factory Default Settings
ParameterDefault Value
(National ISDN)
Default Value
(5ESS Custom ISDN)
Auto Param. Download
Enabled
N/A
CA Reservation
Not Reserved Not Reserved
Call Log Password
None None
Call Preference
Ring(Network Controlled) *
ClockTime of the last
error log entryTime of the last
error log entry
Conference
FA/FI=60
N/A
Display Contrast
Level 5 Level 5
Drop
FA/FI=62
N/A
Handset Volume
Level 3 Level 3
Install Menu Password
None None
Message Waiting
FI=63 FI=63
Multifunction Keys 1-3
CA/DN CA/DN
Multifunction Keys 4+
Unused Unused
Off-hook Ring
Single Single
Originating DN
Yes, PDN Yes, Keys 1-3
Ringer Volume
Level 3 Level 3
Ringing Control
Always Always
Ringing Tone
#5 (of 8) #5 (of 8)
Terminal Mode
CACH
N/A
Transfer
FA/FI=61
N/A
Voice Mode
Handset Handset
*fixed setting for 5ESS Custom ISDN 
						

							66Tone Commander 6220T-TSG User Manual
Appendix E
UL/FCC Statements
Important Safety Instructions
1.  Never install telephone wiring during a lightning storm.
2.  Never install telephone jacks in wet locations unless the jack is specifically
designed for wet locations.
3.  Never touch uninsulated telephone wires or terminals unless the telephone
line has been disconnected at the network interface.
4.  Use caution when installing or modifying telephone lines.
When using your telephone equipment, basic safety precautions should always
be followed to reduce the risk of fire, electric shock and injury to persons,
including the following:
5.  Read and understand all instructions.
6.  Follow all warnings and instructions marked on the product.
7.  Unplug the line cord before cleaning. Do not use liquid or aerosol cleaners.
Use a damp cloth for cleaning.
8.  Do not use this product near water, for example, near a bathtub, wash
bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming
pool.
9.  Do not place this product on an unstable cart, stand, or table. The product
may fall, causing serious damage to the product.
10.  This product should be operated only from the type of power source
indicated on the marking label. If you are not sure of the type of power
supply to your home, consult your dealer or local power company.
11.  Do not allow anything to rest on the power cord. Do not locate this product
where the cord will be abused by persons walking on it.
12.  Do not overload wall outlets and extension cords as this can result in the
risk of fire or electric shock.
13.  Never push objects of any kind into this product through any openings as
they may touch dangerous voltage points or short out parts that could
result in a risk of fire or electric shock. Never spill liquid of any kind on this
product. 
						

							Tone Commander 6220T-TSG User Manual67 14.  To reduce the risk of electric shock, do not disassemble this product, but
take it to a qualified serviceman when some service or repair work is
required. Opening or removing covers may expose you to dangerous
voltages or other risks. Incorrect reassembly can cause electric shock
when the appliance is subsequently used.
15.  Unplug this product from the wall outlet and refer servicing to qualified
service personnel under the following conditions:
A. When the power supply cord or plug is damaged or frayed.
B. If liquid has been spilled into the product.
C. If the product has been exposed to rain or water.
D. If the product does not operate normally by following the operating
instructions. Adjust only those controls that are covered by the
operating instructions, because improper adjustment of other controls
may result in damage and will often require extensive work by a
qualified technician to restore the product to normal operation.
E. If the product has been dropped or the case has been damaged.
F. If the product exhibits a distinct change in performance.
16.  Avoid using a telephone (other than a cordless type) during an electrical
storm. There may be a remote risk of electric shock from lightning.
17.  Do not use the telephone to report a gas leak in the vicinity of the leak.
SAVE THESE INSTRUCTIONS