Home > TiE > Telephone > TiE Onyx 2, 3, 4, 5 Service And Programming Manual

TiE Onyx 2, 3, 4, 5 Service And Programming Manual

Here you can view all the pages of manual TiE Onyx 2, 3, 4, 5 Service And Programming Manual. The TiE manuals for Telephone are available online for free. You can easily download all the documents as PDF.

Page 81

 ROUTE SELECTION  
Description
Automatic Route Selection 
 provides call routing and call restriction
based on the digits a user dials. ARS lets the 
system administrator obtain the
most cost-effective use of the system’s connected long distance carriers.
ARS is an on-line call routing program that the system administrator can
customize from the programming terminal. The program accommodates over
8.000 call routing choices -- 
 a custom-ordered rate structure database.
ARS allows the system administrator...

Page 82

AUTOMATIC ROUTE SELECTION (HYBRID ONLY)
Programming
l
l
l
Required 
E- Trunks.   Trunk in Outbound Rotary  ARS requires outbound
trunk rotaries. This prompt determines the selection sequence for 
within each rotary.
E- Trunks.  Trunk Service Number  Assign a Service Number  each
trunk used for ARS. ARS routes calls to Service Numbers. not individual
trunks.
E- Trunks,  Trunk Group Assignment (First Trunk in Group) 
Group trunks in rotaries by assigning each one the same First Trunk in Group
number.
 ARS...

Page 83

AUTOMATIC  SELECTION (HYBRID ONLY)
 Features
Feature Operation
Step 1 
Step  
Step 3 
Step 
 ARS Authorization Codes  If required. enter ARS Dial Treatment
Authorization codes. See Appendix A 
 more details.
QX- Suppress 
  Speed Dialing  If ARS Dial Treatments 
the  digit. enter N. To suppress outdialing the  enter  See Appendix A
for more details.
 Single Digit Line Access If enabled. users can dial 9 (instead of 90) for
ARS.
Account Code CapabilityARS can optionally utilize the system’s Account...

Page 84

BACKGROUND MUSIC
Background Music (BGM) sends music from a customer-provided music
source to the speakers in 
 and ESL telephones. If an extension user
activates it. BGM plays whenever the user’s extension is idle. Incoming calls
and Page announcements override BGM. Optionally. BGM can also play
over the external paging zones.
Background Music requires a customer-provided music source and an unused
trunk circuit.
Conditions
a. In the large systems, the customer-provided music source connects to an
unused...

Page 85

BACKGROUND MUSIC
Feature Operation
To turn Background 
 on or off:
Step 
 Do not lift handset.
Step 2 lPress HOLD.
To adjust the volume of Background 
Step  Press  UP A or    while feature is active or telephone is idle.
This    incoming  and Paging announcements.
Issue 1-OFEATURESl-41 

Page 86

BATTERY BACKUP
Description
Battery Backup allows the system to operate normally during AC power
failures and brownouts. For each large system CEU. Battery Backup requires
.
the installation of an optional Battery Backup Kit (P/N 88107) and two
customer-provided batteries. For each VS CEU, the Valcom VB260 Battery
Backup Unit‘is recommended. Battery Backup will power a fully loaded
system for about two hours.
The batteries listed below are compatible with the P/N 88107 Battery Backup
Kit. Both batteries...

Page 87

CALL COVERAGE KEYS
Programming
l
Related Features
Feature Operation
Step 1 
Step 2 
Step 3 
Issue 1-o
A Call Coverage   an estension user one-touch call pickup. Transfer
and Intercom for the assigned extension. This simplifies phone operation for
co-workers that frequently cover each other’s calls, Additionally, 
extension user can program the ringing options for their Call Coverage keys.
A Call Coverage 
 also  the status of the covered extension:
When the key is...The covered extension is...
Off. . . ....

Page 88

CALL COVERAGE KEYS
Feature Operation
(Cont’d)
Step 1 
Step  
Step  l
Step  
Step  
Step 3 l
Step  l
To Transfer a  to a covered estension:
Press Call Coverage key.Look for:(Modular) -- Line  Hold Flash (red)   Flash (green)
(Non-Modular) --  key  Hold
Call Coverage key On (green)
 If you hear two beeps. announce call.
OR
If you hear ringing. wait for called party to answer.
OR
If you hear busy or fast busy. hang up to have the call wait at the covered
extension.You can also press the line  to return  the...

Page 89

CALL FORWARDING
Description
Programming
l
Related Features
Issue 1-OFEATURES 1-45
Call Forwarding permits an extension user to redirect their calls to another
extension. Optionally. the user can also redirect calls to an outside telephone
number (Off-Premise Call Forwarding). Call Forwarding ensures that the
user’s calls are 
   are away from their work area.  that
only the extension receiving the 
 calls can place an Intercom call to
the forwarding extension.
Conditions
a. Off-Premise Call Forwarding...

Page 90

CALL FORWARDING
Related Features
Central Office Calls. PlacingAn extension  can forward calls off-premise  over lines to which the usernormally has access and call-out.
Direct Inward LineCall Forwarding reroutes 
Do Not Disturb Do  Disturb cancels Call 
Extension HuntingIf an  is in a Hunt Group. forwarding calls at that extension disrupts normal
hunting. An extension user can. however. forward calls to a UCD master number.
Group RingCall  does not reroute Ring Group Calls.
Line (Trunk) RotariesAn...
Start reading TiE Onyx 2, 3, 4, 5 Service And Programming Manual

Related Manuals for TiE Onyx 2, 3, 4, 5 Service And Programming Manual

All TiE manuals