TiE Onyx 2, 3, 4, 5 Service And Programming Manual

SPECIAL TRUNK INTERFACE
Description
Programming
Related Features
Feature Operation
The Special Trunk Interface (P/N 88 146) is optional equipment that provides
15 circuits for connecting the following special trunk circuits:
 Tie lines (7 max.)
 type Off-Premise Extensions or Direct Inward Dialing  
max.)
By allowing connection of these special circuits, the Special Trunk Interface
 improves the flexibility of the system. The following chart shows how
many 
 the installer can connect to each system...

SPEED DIAL
Description
Speed Dial gives an extension user quick access to frequently called numbers.
There are two types of Speed Dial: Personal Speed Dial and System Speed
Dial. Personal Speed Dial numbers are available to individual extensions or
shared by groups of extensions. System Speed Dial numbers are available to
every system user.
The 12x36 and 32x60 systems allow a maximum of 2,040 Speed Dial bins
(i.e., numbers), allocated in blocks of 20 bins each. In these systems, there are
a total of 102...

SPEED 
Personal Speed Dial
Each extension user has up to 
 Personal Speed Dial numbers reserved for
their own use. 
 pressing  the first 20 programmable  on a 
button  become Personal Speed Dial keys. The first ten keys are for
bins 
 the second ten for bins 20-29. All lo-button  and ESL users
 dial access to the  Personal Speed Dial bins. An extension user or the
system administrator (from the programming terminal) can store Personal
Speed Dial numbers.
One-Touch Speed Dial
Optionally, a 
 can have any...

SPEED DLAL
Programming
l
l
l
Required 
CP- Inhibit System Speed Dial   Allow/deny extensions  this
COS the ability to use System Speed Dial numbers.
 Extensions.    Service  Assign Class of  to extensions.
E- Extensions, EB- Speed Dial Blocks  Assign a Speed Dial block to 
extension. Extensions can share a block. thereby sharing the Extension Speed
Dial numbers.
QD- Number of System Speed Dial Digits  Assign the number of System
Speed Dial digits (2.
 or 4). This allows either 10, 100 or 1000 System...

Related Features
Account Code If      rhe  must enter a code  the Speed
Dial number  out.  an  user can store an  Code in a
Personal  Dial bin.
Attendant Console  IV)
The Attendant  can   programmable   assigned as Speed Dial key.
Refer to    feature.
Automatic Route  Cost RoutingSpeed Dial ma!  pass XRS and LCR routing.
Direct Station Selection. ConsoleIf the DSS Console   for Speed Dial. it should have four consecutive
Speed Dial blocks  in EB). This prevents other extension users from
sharing the...

SPEED DIAL
Feature 
Operation
Step I l
Step  
Step 3 
Step 
Step  
Step 6 
Step 7 l
Step 8 
Step 1 
Step 2 
Step 3 
Step 1 
Step 2 
 Speed Dial
To store a System Speed Dial Sumber (if 
  has Direct Trunk
Access 
 
Lift handset.
Press Look for: OnListen for:Dial toneIf   an ESL  skip this step.
Press Listen for:Dial tone stops
Dial the System Speed Dial bin number (normally 700-799).
For display 
 only:
o Dial 9 to begin 
 a name.Refer to Storing a Speed Dial Name below.Go to step 6 below when you are...

SPEED 
Feature Operation
Step 1 
Step  
Step 3 
Step  
Step  l
Step 6 
Step 7 
Step 1 
Step  
Step 3 
Step  l
Step  l
step 6 
Step 7 
Personal Speed Dial
To store a Personal Speed Dial number (at 
 
Press DIAL.Look for:HF On
Listen for: Dial  On
If 
 are programming a  Speed Dial  or an  extension. skip
this step. To  a number on a One-Touch Speed Dial key in VS. go to 
 features 
Press 
Listen for:Dial tone stops
 Dial the Personal Speed Dial bin number  20-29).
OR
 Press the Personal Speed Dial bin kev...

SPEED 
Feature Operation
Step 1 
Step 2 
Step 3 
Step  l
Step 2 
Step I 
Step 2 
Step 3 
Step  l
Step  l
Personal Speed Dial 
To call a Personal Speed Dial number (using a bin  or code):
Lift handset. can preselect a trunk  pressing a line key. If you preselect,  must press instead of  before dialing a bin number.
Press DIAL.Listen for:Dial toneIf you have an ESL  skip this step.
Dial Personal Speed  bin number (20-29.  or press bin key.Look for:Line  On (red green) if appearing on your phone, or Fast...

SPLIT
Feature Operation
Step  
Step  
Step 1 
Step  
Step 3 
Step  
Step 1 
Step  
Step 1 l
Step 1 
Step  
Step 3 l
Step  l
Step  l
Issue 1-O .
Press INTERCOM.Look for: On
Listen for: tone
Press  and dial 7.  the  on Hold.  previous call now goes on Hold instead,
Repeat 
  and  to continue alternating between the calls.
To Split between a new call and your current call (when  current call
is an outside call and your 
 call is an Intercom call):
Press INTERCOM.Look for:(Modular) --HOLD/line key Hold Flash...

STATION MESSAGE DETAIL RECORDING
Description
Station Message Detail Recording (SMDR) provides a record of the system’s
calls. Typically, the record outputs to a customer-provided printer, terminal
or SMDR data collection device. SMDR allows the system administrator to
account for usage at each extension and trunk. This makes charge-back and
traffic management easier.
SMDR requires the installation of a customer-provided ASCII record
collection device (e.g., printer). In large systems, the device connects...