System 25 Fax ATTendant System Implementation And Switch Manual

FAX Attendant Initial Implementation
4.At the Voice System Administration menu, move the cursor to
Configuration Management and press [ ENTER ¿ ¿ ].
The Configuration Management menu appears.
Configuration Management
 System Control>Voice Equipment
Move to an item using arrow keys and hit Enter to select
HELPPREV-FRMNEXT-FRMCANCELCMD-MENU
FRM-MGMTCHG-KEYS
CHG-KEYS
Screen 2-2. Configuration Management Menu
2-3 

FAX Attendant Initial Implementation
5.At the Configuration Management menu, move the cursor to Voice
Equipment and press [ ENTER ¿ ¿ ].
The Voice Equipment window appears.
Voice Equipment
CHN CD.PT STATESTATE-CHNG-TIMESERVICE NAME PHONEGROUPOPTS TYPE
00.0 foosOct 01 14:48:57–2talk IVP610.1 foosOct 01 14:48:57–2talk IVP620.2 foosOct 01 14:48:57–2talk IVP630.3 foosOct 01 14:48:57–2talk IVP640.4 foosOct 01 14:48:57–2talk IVP650.5 foosOct 01 14:48:57–2talk IVP6
HELPDISP-OPTPREVPAGE
CHGSTAGENEXTPAGE...

FAX Attendant Initial Implementation
7.Press [ F3 ] (ASSIGN).
The Assign menu appears.
Assign
Channels to Groups
Channel to PBX Extension
>Services to Channels
Voice Equipment
CHN CD.PT STATE
STATE-CHNG-TIMESERVICE NAME PHONEGROUPOPTS TYPE00.0foosOtct 01 14:48:57–2talk IVP610.1foosOct 01 14:48:57–2talk IVP620.2foosOct 01 14:48:57–2talk IVP630.3foosOct 01 14:48:57–2talk IVP640.4foosOct 01 14:48:57–2talk IVP650.5foosOct 01 14:48:57–2talk IVP6
HELPPREV-FRMNEXT-FRMCANCELCMD-MENU
FRM-MGMTCHG-KEYS
CHG-KEYS...

FAX Attendant Initial Implementation
8.Move the cursor to Services to Channels and press [ ENTER ¿ ¿ ].
The Assign Service to Voice Channels form appears.
Assign Service to Voice Channels
Service:
Channels:
Assign
Channels to Groups
Channel to PBX Extension
>Services to Channels
HELP
CHOICESSAVEPREV-FRMNEXT-FRMCANCELCMD-MENU
FRM-MGMTCHG-KEYS
CHG-KEYS
Screen 2-5. Assign Servlce to Voice Channels Form
Voice Equipment
CHN CD.PT STATESTATE-CHNG-TIME
SERVICE NAME PHONEGROUPOPTS TYPE00.0foosOct 01...

FAX Attendant Initial Implementation
10.Press [ F2 ] (CHOICES).
The Service Choices menu appears.
Assign Service to Voice ChannelsAssign
Service:
Channels to Groups
Channels:Service ChoicesChannel to PBX Extension
>Services to Channels
>auto_attend
call_answer
fax_cament
fax_mail
CHN CD.PT STATE
STAfax_respCE NAME PHONEGROUPOPTS TYPE00.0 foosOctvoice_mail2talk IVP610.1 foosOctinfo_service2talk IVP620.2 foosOctmessage_drop2talk IVP630.3 foosOctsendmsg2talk IVP640.4 foosOct2talk IVP650.5 foosOct 01...

FAX Attendant Initial Implementation
13.Enter a channel number from 0 to the maximum available, a range of channel
numbers with the starting and ending numbers separated by a dash, or a list
of channel numbers and/or ranges separated by commas.
14.Press [ F3 ] (SAVE).
The information is entered, the Assign Service to Voice Channels form closes,
and a Command Output window appears.
Command Output
Assign Voice Equipment Output:
Assigned service voice_mailto channel 2Assigned service voice_mailto channel 3...

FAX Attendant Initial Implementation
Changing Service Assignments
To change service assignments, use the procedure for Entering Channel
Assignments. The new assignments will replace the old assignments. To unassign a
channel, press [ 
F8 ] (CHG-KEYS) and then press the [ F4 ] (UNASSIGN) function key.
The Unassign Service From Voice Channel form appears. Enter the channel
number(s) to be unassigned, and press [ 
F3 ] (SAVE). Channels should not be left
unassigned. In most cases, an unassigned channel...

FAX Attendant Initial Implementation
Administering Switch Interface Parameters
Some specific parameters are necessary to tell FAX Attendant how to communicate
with System 25. For convenience, these parameters are collected on FORM B and
are explained below.
/ NOTE:
The switch interface parameters are automatically set to correct values for the
System 25. This information is for troubleshooting purposes only. Do not
change the switch interface parameters unless they have been accidently
changed from the...

FAX Attendant Initial Implementation
Changing Switch Interface Parameters
The switch interface parameters should not be changed from the values
specified previously.
If for some reason someone has changed them, enter the correct values shown
above by following these steps:
1.Log on as maint.
2.At the Integrated Solution Maintenance menu, move the cursor to
Technician Maintenance and press [ ENTER ¿ ¿ ].
The Technician Maintenance menu appears.
3.At the Technician Maintenance menu, move the cursor to...

FAX Attendant Initial Implementation
4.At the Voice System Administration menu, move the cursor to Switch
Interfaces and press [ ENTER ¿ ¿ ].
The Switch Interface Administration form appears.
Switch Interface Administration
AT&T System 25
>Switch Hook Flash Duration:
600Wink Disconnect Interval:300
 Type of Signaling:TT
Incoming Speech Volume:4000
Outgoing Speech Volume:1000
Dial Tone Training:
Yes
HELPCHOICES
SAVEPREV-FRM
NEXT-FRMCANCEL
PRINT
CMD-MENU
FRM-MGMTCHG-KEYS
CHG-KEYS
Screen 2-9. Voice System...