System 25 Fax ATTendant System Implementation And Switch Manual

About This Guide
Related Documents
You should be familiar with the following documents:
n
n
n
n
n
n
n
n
n
AT&T Integrated Solution Ill
for System 25 Communications System
System Manager’s Guide
Document No. 555-540-717
AT&T Integrated Solution Ill
for System 25 Communications System
Installation and Maintenance
Document No. 555-540-716
AT&T FAX Attendant System™ Release 2.1.1
User’s Guide
Document No. 555-007-102
AT&T FAX Attendant System™ Release 2.1.1
System Manager’s Guide
Document No. 555-007-100...

About This Guide
n
n
nAT&T System 25 R3 Implementation Manual and Records Binder
Document No. 555-540-650, Issue 5
AT&T System 25 R3 Administration Manual
Document No. 555-540-500
AT&T System 25 R3 Reference Manual
Document No. 555-540-200
6 

Overview and Testing
1
The AT&T FAX Attendant System™ is always installed co-resident with AUDIX Voice
Power in the IS III environment. You can administer many of the AUDIX Voice Power
features and the FAX Attendant features at any time using the same software and
procedures. The procedures in this guide pertain only to FAX Attendant. For
information on features and procedures that are specific to AUDIX Voice Power,
consult the AUDIX™ Voice Power Release 2.1 System Manager’s Guide.
Hardware and Software...

Overview and Testing
n
nAn optional AT&T Applications Printer (dot matrix, wide carriage), AT&T Call
Accounting Printer (dot matrix, narrow carriage) for printing reports, or any
printer fully compatible with the HP
® LaserJet® Series II printer for printing
reports and faxes.
A cartridge tape drive for loading software and for making backup copies of
files
The number of analog voice channels, the size of subscriber mailboxes, the number
of fax boards, and the size of the hard disk control the maximum...

Overview and Testing
Software Configuration
The software configuration has several major components:
n
n
n
n
n
UNlX® Operating System
The UNIX Operating System provides multitasking, file access, external
communication, and interprocess communication facilities to the application
software.
Integrated Solution Ill
The Integrated Solution Ill (IS Ill) environment allows a single processor to be
used for switch administration and for applications packages such as FAX
Attendant. Both switch administration...

Overview and Testing
Testing Extensions and Connections
The Switch Administrator should have assigned System 25 voice extension for each
FAX Attendant voice and fax channel. Service Technicians should have run the lines
and performed ring-through tests to determine that all lines are working. This
procedure verifies that connections can be established over each circuit.
/ NOTE:
The System 25 administration for voice and fax channel extensions must be
completed before beginning testing. The System 25...

Overview and Testing
Assigning Automated Attendant
to Voice Channels for Testing
For testing purposes, assign the Automated Attendant service to all voice channels.
To assign services to channels, follow these steps:
1.Log on as maint.
2.At the Integrated Solution Maintenance menu, move the cursor to
Technician Maintenance and Press [ ENTER ¿ ¿ ].
The Technician Maintenance menu appears.
Technician Maintenance
Administer Integrated Solution III
Backup Files
Restore Files
Maintenance Log
Printer Setup...

Overview and Testing
3.At the Technician Maintenance menu, move the cursor to Voice System
Administration and press [ ENTER ¿ ¿ ].
The Voice System Administration menu appears.
Voice System Administration
Application Package Administration
>Configuration Management
Reports
Switch Interfaces
System Monitor
Move to an item using arrow keys and hit Enter to select
HELP
PREV-FRM
NEXT-FRM
CANCELCMD-MENUFRM-MGMTCHG-KEYS
CHG-KEYS
Screen 1-2. Voice System Administration Menu
1-6 

Overview and Testing
4.At the Voice System Administration menu, move the cursor to
Configuration Management and press [ ENTER ¿  ¿ ].
The Configuration Management menu appears.
Configuration Management
System Control
>Voice Equipment
Move to an item using arrow keys and hit Enter to select
HELPPREV-FRMNEXT-FRMCANCELCMD-MENU
FRM-MGMTCHG-KEYS
CHG-KEYS
Screen 1-3. Configuration Management Menu
1-7 

Overview and Testing
5.At the Configuration Management menu, move the cursor to Voice
Equipment and press [ ENTER ¿ ¿ ].
The Voice Equipment window appears.
/ NOTE:
Your system may have more or fewer voice channels than are shown
in these screens. Your system can show a maximum of 12 channels
numbered 0 to 11.
Voice Equipment
CHN CD. PT STATESTATE-CHNG-TIMESERVICE NAME PHONEGROUPOPTS TYPE00.0 foosOct 01 14:48:57–
2
10.1 foostalk IVP6
Oct 01 14:48:57–
2
2talk IVP60.2 foosOct 01 14:48:57–
2
3talk IVP60.3...