Starplus Triad Xts Digital Key Telephone System System Programming And Operation Manual

Caller ID Name/NumberA-5
Appendix A - ICLID / Caller ID
Conditions
» When enabled, this display overrides transfer call LCD messages, ACD Ring messages, Call 
Pickup messages, and Answer messages. If the user wishes to view the Line Number/Call 
Timer and the standard call information, they can press the flexible button to toggle 
between the name/number and normal mode.
» A flexible button must be programmed for this feature to operate.
Calling Number / Name Display
Description
The Calling Number/Name...

A-6Caller ID Name/Number
Appendix A - ICLID / Caller ID

If the Central Office delivers a Name, it is positioned left justified in the 24-character field 
on the display. Note that if a number is received which matches a number/name 
translation, the translated name is used and the name delivered from the Central Office is 
effectively discarded.

If No Name is available from the Central Office or a Translation Table, the delivered 
number is displayed as the repeated character N (14 characters)....

ICLID ProgrammingA-7
Appendix A - ICLID / Caller ID
Local Name Translation
Description
An administrable table provides a local translation from a received calling number to a name. 
This table can be administered by the customer from the attendant console location. In cases 
of conflict between the name delivered from the CO and that in the local translation table, 
the local translation table shall rule. 200 entries are provided.
ICLID Programming
Description
The XTS system provides ICLID input on the...

A-8ICLID Programming
Appendix A - ICLID / Caller ID
Enable / Disable
Description
The ICLID (Incoming Calling Line IDentification) feature was added to the XTS system. These 
features are unavailable unless the Basic ICLID Software package was purchased separately. 
For this feature to operate properly, it must be activated from the Central Office so the 
numbers of the calling party are delivered over the individual tip and ring of the CO lines 
during the first silent interval between ringing....

ICLID ProgrammingA-9
Appendix A - ICLID / Caller ID
Port Assignment
Programming Steps
1. Press the PORT flexible button (FLASH 56, Button #4) to specify which port to use for 
ICLID information.
2. Enter a valid number for one of the ICLID Ports:
[1] = Port # 1 MPB On-Board RS-232C (recommended for maintenance use only)
[3] = Port # 3 Serial Interface Unit (SIU) (recommended for ACD, ICLID, and SMDR uses)
[4] = Port #4 Serial Interface Unit (SIU) (recommended for ACD, ICLID, and SMDR uses)
[5] = Port #5...

A-10ICLID Programming
Appendix A - ICLID / Caller ID
Ring Delay Timer
Description
The Ring Delay timer was added to the XTS to accommodate ICLID interface requirements. 
The Ring Delay timer is started whenever a CO Line detects incoming ringing. When the timer 
expires, CO line ringing is detected by digital telephones and SLTs.
The purpose of this timer is to wait until after the first ring cycle to be detected by the digital 
system so the ICLID information is passed down the CO line prior to being...

ICLID ProgrammingA-11
Appendix A - ICLID / Caller ID
Initialize ICLID-DID Tables
Description
ICLID Table parameters may be initialized, setting all data fields to their original default 
values.
Programming Steps
1. Press the ICLID-DID TABLES flexible button (FLASH 80, Button #8). The following 
message displays:
2. Press the HOLD button. A confirmation tone sounds.
Table A-1: ICLID-DID Table Defaults
Program 
CodeFlexible
ButtonFeaturesDefault Value
(after initialization)
FLASH 43 ICLID-DID TABLES
1...

A-12ICLID Programming
Appendix A - ICLID / Caller ID
Print ICLID - DID Tables
Description
The Print ICLID-DID Tables command dumps the entire database as a permanent record 
which can serve as a hardcopy of the database. The system baud rate must match that of the 
printer or receiving device. When printing the ICLID-DID Table(s), the following data prints 
(an example follows the programming steps):

ICLID Features

ICLID Translation Table

ICLID Unanswered Call Table

ICLID Answered Call Table

ICLID...

ICLID ProgrammingA-13
Appendix A - ICLID / Caller ID
Figure A-2: ICLID Translation Tables Printout
ICLID NAME BAUD PORT ICLID UNANSWERED CALL TABLE
---------------------------
N Y 9600 1 NONE
ICLID TRANSLATION TABLE ICLID ANSWERED CALL TABLE
----------------------- ---------------------------
NONE
ENTRY ROUTE NAME NUMBER ROUTE RING ASSIGNMENTS
600 ### . ----------------------
601 ### . 00
602 ### . NONE
603 ### .
604 ### . 01
605 ### . NONE
606 ### .
607 ### . 02
608 ### . NONE
609 ### .
610 ### . 03
611...

A-14ICLID Programming
Appendix A - ICLID / Caller ID
13 106
NONE 106A
14 107
NONE 107A
15 108
NONE 108A
16 109
NONE 109A
17 110
NONE 110A
18 ...
NONE ...
19 130
NONE 130A
20 ...
NONE ...
21 150
NONE 150A
... and so on through 99 ...
...
100
100A 170
170A
101
101A ...
...
102
102A 190
190A
103
103A ...
...
104
104A 210
210A
105
105A ... and so on through 252
Figure A-2: ICLID Translation Tables Printout