Sony Xb10 User Manual

Help Guide
Wireless  Speaker
SRS-XB10
Customer support websites
Access the  following support home pages to get  support information  about your  speaker:
For customers in  the  USA:
http://esupport.sony.com/
For customers in  Canada:
http://esupport.sony.com/CA/
For customers in  European countries:
http://www.sony.eu/support
For customers in  Latin  America:
http://www.sony- latin.com/
For customers in  other countries/regions:
http://www.sony- asia.com/
4- 694- 214- 11(2)  Copyright 2017  Sony...

Help Guide
Wireless  Speaker
SRS-XB10
What can  I do to solve  a problem?
If  the  speaker  does  not  function as expected, try the  following steps  to resolve the  issue.Find  the  symptoms  of the  issue  in  this  Help Guide and try any corrective  actions  listed.
Charge the  speaker.
You  may be able to resolve some issues by charging the  battery.
Push the  RESET  button  of the  speaker.
Initialize the  speaker.
This operation  resets volume settings, etc., and deletes all  pairing...

Help Guide
Wireless  Speaker
SRS-XB10
Unable to turn on the speaker or charge the built-in battery
Charge the  built- in  battery.
Make sure  the  micro-USB cable  is firmly  connected to the  speaker  and booted computer.
When using  a  USB  AC  adaptor  (not supplied), make sure  the  micro- USB cable  is firmly  connected to the  speaker  and the
USB  AC  adaptor. In addition,  make sure  the  USB  AC  adaptor  is firmly  connected to an AC  outlet.
Related Topic Turning  the  power on
About the...

Help Guide
Wireless  Speaker
SRS-XB10
The power suddenly  turns off
Press  the   (power)   PAIRING button  to turn on the  speaker. If  the  speaker  does  not  turn on,  charge the  speaker  by
connecting the  speaker  to a  booted computer  an AC  outlet via a  USB  AC  adaptor  (not supplied).
Related Topic Turning  the  power on
Auto power off function
4- 694- 214- 11(2)   Copyright 2017  Sony Corporation
79  

Help Guide
Wireless  Speaker
SRS-XB10
No sound/Sound  from only one  speaker/Low  sound level/Distorted
sound/Humming or noise  in the speaker output/No voice  or low  voice  from callers
Check that both  the  speaker  and the  connected device are turned on.
Turn up the  volume of the  speaker  and the  connected device.
Check that the  connected device is playing.
Make sure  the  audio cable  is firmly  connected to the  AUDIO  IN jack  during  playback  in  AUDIO  IN mode.
If  you are connecting a...

Help Guide
Wireless  Speaker
SRS-XB10
Sound becomes  low  while  in use
The battery is running low if the  CHG (charge) indicator  flashes  in  orange and the  volume decreases. Connect the  speaker  to
a  booted computer  or AC  outlet via a  USB  AC  adaptor  (not supplied). Otherwise,  turn off the  speaker  and charge the  battery
sufficiently.
When you use the  speaker  at a  loud volume, the  battery may run low even  if the  speaker  is connected to a  booted computer
or AC  outlet via a  USB  AC...

Help Guide
Wireless  Speaker
SRS-XB10
Unable to pair the speaker with a BLUETOOTH device
Bring  the  speaker  and the  BLUETOOTH device to within  1  m (3 ft) of each  other.
If  the  
 ( BLUETOOTH )  indicator  is not  flashing quickly in  white, press and hold the   (power)   PAIRING button  until you
hear  beeps and the  
 ( BLUETOOTH )  indicator  begins  to flash quickly in  white.
Connect the  speaker  to a  booted computer  or AC  outlet via a  USB  AC  adaptor  (not supplied). Otherwise,  charge...

Help Guide
Wireless  Speaker
SRS-XB10
Unable to connect the speaker to a BLUETOOTH device with One-touch
connection ( NFC)
Keep the  NFC- compatible device close  to the  speaker  until the  device reacts.  If  you fail to connect,  move the  device slowly
over  the  N  marked  part of the  speaker.
Check that the  NFC  function of the  device is set  to on.
If  the  device is attached with  a  case,  remove  it.
NFC  reception sensitivity  varies depending on the  device.  If  you repeatedly fail to...

Help Guide
Wireless  Speaker
SRS-XB10
Using the RESET button
If  the  speaker  cannot  be turned on or cannot  be operated  despite it being turned on,  open the  cap on the  rear  side and push  the
RESET button  for  about 2  seconds with  a  pin  or other pointed objects.
After pushing the  RESET  button, turn on the  speaker. If  it does  not  turn on,  consult  your  nearest Sony  dealer.
Note
The speaker  cannot  be  reset while  the  power is off.
Pairing  information  is not  deleted  by pushing...

Help Guide
Wireless  Speaker
SRS-XB10
Initializing the speaker
With the  speaker  turned on,  press and hold the  – (volume) button  and the   (power)   PAIRING button  at the  same time for
more than  5  seconds until the  speaker  turns off.
The speaker  is initialized.  Settings such as volume, etc., are restored to the  factory  default  settings, and all  pairing  information  is
deleted.
4- 694- 214- 11(2)   Copyright 2017  Sony Corporation
85