Sony Projector Vpl Vw1000es User Manual

41 
Using the Menus
Picture Menu
The Picture menu is used for adjusting the picture.
These items may not be available, depending on the type of input signal. For details, see “Input 
Signals and Adjustable/Setting Items” (1 pages 82 to 85 ).
Item names in brackets represent those printed on the remote control.
Note
Calib. Preset
[CALIBRATED PRESET]You can select the picture viewing mode that best suits the type of 
video source or the environment.
You can save and use different preset modes for 2D/3D...

 42
Reality Creation
[REALITY CREATION]Adjusts the detail and noise processing of images. (Super-resolution 
function)
On: Applies detail and noise processing effects.
Resolution: When you increase the setting value, the texture and 
detail of the picture become sharper.
Noise Filtering: When you increase the setting value, the noise 
(picture roughness) becomes less prominent.
Off: The “Reality Creation” function is not applied.
Cinema Black Pro Advanced Iris [ADVANCED IRIS]
Switches the iris function....

43 
Using the Menus
Brightness
[BRIGHTNESS]Adjusts the brightness of the picture.
The higher the setting, the brighter the picture. The lower the setting, the 
darker the picture.
You can make adjustments by pressing the BRIGHTNESS +/– on the 
remote control.
ColorAdjusts the color density.
The higher the setting, the greater the intensity. The lower the setting, the 
lower the intensity.
HueAdjusts the color tone.
The higher the setting, the more greenish the picture becomes. The lower 
the setting, the...

 44
Expert Setting NR (Noise Reduction)
Reduces the roughness or noise of the picture.
Usually, use to select “Off.”
If the picture is rough or noisy, select a setting from among “Low,” 
“Middle” or “High” according to the input signal source.
MPEG NR (MPEG Noise Reduction)
Reduces block noise and mosquito noise, in particular in digital 
signals.
Usually, use to select “Off.”
If the picture is rough or noisy, select a setting from among “Low,” 
“Middle” or “High” according to the input signal source....

45 
Using the Menus
Expert Setting Gamma Correction [GAMMA CORRECTION]
Adjusts the response characteristics of the tone of the picture.
Select a favorite tone from 10 options.
1.8:            Bright  Produces a brighter picture overall.
2.0
2.1
2.2
2.4
2.6:            Dark   Produces a darker picture overall.
Gamma 7: Brightens dark areas in the picture, and expands gradation 
expression.
Gamma 8: Produces a picture with contrast emphasized slightly.
Gamma 9: Produces a picture with contrast emphasized...

 46
Expert Setting Color Space [COLOR SPACE]
Converts the color space.
BT.709: An ITU-R BT.709 color space, which is used for high-
definition television broadcast or Blu-ray Disc. The color space is 
equivalent to sRGB.
DCI: A color space based on the DCI specification (1 page 66).
Adobe RGB: An approximated Adobe RGB color space, which has a 
wider range of color reproduction than sRGB, and suited for 
displaying an image recorded in Adobe RGB specification.
Color Space 1: The color space suited for...

47 
Using the Menus
Screen Menu
You can set the input signal, picture size, aspect mode, etc..
These items may not be available, depending on the type of input signal. For details, see “Input 
Signals and Adjustable/Setting Items” (1 pages 82 to 85).
Item names in brackets represent those printed on the remote control.
Note
Picture Position
[POSITION] You can store up to five combinations of lens settings (focus, window 
size, window position) and aspect ratio.
After setting the lens and aspect, select...

 48
Aspect
[ASPECT]You can set the aspect ratio of the picture to be displayed for the 
current input signal (
1 page 34). This item is enabled only when a 
video signal (preset memory numbers 3 to 14 and 93 to 95) 
( 1  page 79) is input.
1.85:1 Zoom:  A 1.85:1 aspect ratio picture is displayed in its original 
aspect ratio, enlarged so that black bands do not appear at the top and 
bottom of the screen.
2.35:1 Zoom:  A 2.35:1 aspect ratio picture is displayed in its original 
aspect ratio, enlarged so...

49 
Using the Menus
Adjust SignalYou can adjust the input signal setting.
Phase: Adjusts the pixel/signal phase of an analog computer input 
signal. Adjusts the picture to the point where it looks clearest.
Pitch: Adjusts the horizontal picture size of an analog computer input 
signal.
As the number increases, the picture becomes wider, and as the 
number decreases, the picture becomes narrower. Adjust the setting to 
match the number of dots of the input signal.
Shift:Adjusts the position of the...

 50
Setup Menu
The Setup menu is used to change the factory preset settings, etc.
StatusSets whether or not the on-screen display is displayed.
Set to “Off” to turn off the on-screen displays except for certain 
menus, message when turning off the power, and warning messages.
LanguageSelects the language used in the menu and on-screen displays. 
Available languages are: English, Dutch, French, Italian, German, 
Spanish, Portuguese, Russian, Swedish, Norwegian, Japanese, 
Chinese (Simplified Chinese),...