Sony Projector Vpl Vw1000es User Manual

							41 
Using the Menus
Picture Menu
The Picture menu is used for adjusting the picture.
These items may not be available, depending on the type of input signal. For details, see “Input 
Signals and Adjustable/Setting Items” (1 pages 82 to 85 ).
Item names in brackets represent those printed on the remote control.
Note
Calib. Preset
[CALIBRATED PRESET]You can select the picture viewing mode that best suits the type of 
video source or the environment.
You can save and use different preset modes for 2D/3D respectively.
Cinema Film 1: Picture quality suited to reproducing the highly 
dynamic and clear images typical of master positive film.
Cinema Film 2: Picture quality suited to reproducing the rich tone and 
color typical of a movie theater.
Cinema Digital: Picture quality suited to reproducing digital cinema-
like images resembling DCI specifications (1 page 66).
Reference: A picture quality setup suitable for when you want to 
reproduce faithfully the original image quality, or for enjoying image 
quality, without any adjustment.
TV: Picture quality suited for watching TV programs, sports, concerts, 
etc.
Photo: Ideal for projecting still images taken with a digital camera.
Game: Picture quality suited to gaming, with well-modulated colors and 
fast response.
Bright Cinema: Picture quality suited for watching movies in a bright 
environment, such as a living room.
Bright TV: Picture quality suited for watching TV programs, sports, 
concerts, and other video images in a bright environment, such as a 
living room.
Tip
Any adjustments to picture quality settings are saved for each input.
ResetResets all currently selected Calib. Preset mode settings to their default 
values (1 page 40).
Tip
Reset does not affect settings saved for the Custom 1 to 5 items of 
“Color Temp.” 
						

							 42
Reality Creation
[REALITY CREATION]Adjusts the detail and noise processing of images. (Super-resolution 
function)
On: Applies detail and noise processing effects.
Resolution: When you increase the setting value, the texture and 
detail of the picture become sharper.
Noise Filtering: When you increase the setting value, the noise 
(picture roughness) becomes less prominent.
Off: The “Reality Creation” function is not applied.
Cinema Black Pro Advanced Iris [ADVANCED IRIS]
Switches the iris function.
Auto Fu ll: Automatically adjusts to optimize the iris aperture according 
to the brightness level of the input source. Moreover, signal 
processing, which optimizes gradation expression between the peak 
light and dark parts, expresses a large dynamic range. This results in a 
bright and high contrast image.
Auto Limited: A lower brightness than Auto Full, making the image 
suitable for viewing in a dark room.
Manual: Manually (fixed) adjusts the iris.
Off: Disables the iris (aperture) function.
Lamp Control
Switches the lamp output.
High: Increases the brightness, and projects brighter images.
Low: Decreases the brightness, and enhances blacks by minimizing 
brightness. 
Tip
Setting “Low” reduces fan noise, while also reducing energy 
consumption for longer lamp life.
Motionflow Film Projection
Reproduces an image similar to that of projected film.
Use this setting as preferred, based on the image content.
On: Reduces afterimage.
Off: The reduction effect of afterimage is less than the “On” setting. The 
picture will become brighter.
Motion Enhancer [MOTION ENHANCER]
Reproduces fast-moving pictures smoothly without generating 
afterimages.
High: Select this for picture quality smoother than “Low.”
Low: Select this for smooth picture quality.
Off: Select this to not apply the motion enhancer function.
Tip
Certain scenes may contain digital signal artifacts. In this case, set this 
function to “Off.”
Contrast
[CONTRAST]Adjusts the contrast.
Higher values increase the sharpness in images, while lower values 
decrease the sharpness.
You can make adjustments by pressing the CONTRAST +/– on the 
remote control. 
						

							43 
Using the Menus
Brightness
[BRIGHTNESS]Adjusts the brightness of the picture.
The higher the setting, the brighter the picture. The lower the setting, the 
darker the picture.
You can make adjustments by pressing the BRIGHTNESS +/– on the 
remote control.
ColorAdjusts the color density.
The higher the setting, the greater the intensity. The lower the setting, the 
lower the intensity.
HueAdjusts the color tone.
The higher the setting, the more greenish the picture becomes. The lower 
the setting, the more reddish the picture becomes.
Color Temp.
[COLOR TEMP]Adjusts the color temperature.
D93: Equivalent to 9,300 K color temperature normally used in TVs.
Gives white colors a blue tint.
D75: Equivalent to 7,500 K color temperature used as an ancillary 
standard illuminant.
Gives a neutral tint between “D93” and “D65.”
D65: Equivalent to 6,500 K color temperature used as a standard 
illuminant.
Gives white colors a red tint.
DCI: DCI specification (1 page 66) color temperature.
D55: Equivalent to 5,500 K color temperature used as an ancillary 
standard illuminant.
Gives white colors an even redder tint.
Custom 1 to 5: Enables you to adjust, set, and store your favorite color 
temperature.
The factory default settings are as follows.
Custom 1: Same as “D93” color temperature setting.
Custom 2: Same as “D75” color temperature setting.
Custom 3: Same as “D65” color temperature setting.
Custom 4: Same as “DCI” color temperature setting.
Custom 5: Same as “D55” color temperature setting.
Sharpness
[SHARPNESS]Sharpens the outline of the picture, or reduces the noise.
The higher the setting, the sharper the picture. The lower the setting, the 
softer the picture, thus reducing the noise.
You can make adjustments by pressing the SHARPNESS +/– on the 
remote control. 
						

							 44
Expert Setting NR (Noise Reduction)
Reduces the roughness or noise of the picture.
Usually, use to select “Off.”
If the picture is rough or noisy, select a setting from among “Low,” 
“Middle” or “High” according to the input signal source.
MPEG NR (MPEG Noise Reduction)
Reduces block noise and mosquito noise, in particular in digital 
signals.
Usually, use to select “Off.”
If the picture is rough or noisy, select a setting from among “Low,” 
“Middle” or “High” according to the input signal source.
Smooth Gradation
Smooths the gradation of the flat parts of images.
High/Middle/Low: You can adjust the smooth gradation effect.
Off: The smooth gradation function is not applied.
Film Mode
According to the film source you have selected, make a setting for 
playback.
Auto 1 : Suitable for reproducing the original picture movement. 
Normally, set this to “Auto 1.”
Auto 2 : Reproduces a 2-3 or 2-2 Pull-Down format video signal, such as 
film sources, in a smooth picture movement. When a video signal 
other than 2-3 or 2-2 Pull-Down format is input, the picture is played 
back in progressive format.
Off: Plays back the picture in progressive format without detecting 
video signals automatically.
Black Level Adj. (Adjust) [BLACK LEVEL]
Emphasizes blacks and strengthens the contrast.
High/Middle/Low: You can adjust the black level.
Off: The black level function is not applied. 
						

							45 
Using the Menus
Expert Setting Gamma Correction [GAMMA CORRECTION]
Adjusts the response characteristics of the tone of the picture.
Select a favorite tone from 10 options.
1.8:            Bright  Produces a brighter picture overall.
2.0
2.1
2.2
2.4
2.6:            Dark   Produces a darker picture overall.
Gamma 7: Brightens dark areas in the picture, and expands gradation 
expression.
Gamma 8: Produces a picture with contrast emphasized slightly.
Gamma 9: Produces a picture with contrast emphasized more than with 
Gamma 8.
Gamma 10: Simulates the gamma curve of film.
Off: Gamma Correction is not applied.
Using the specified controller, “ImageDirector3” (1 page 38) (supplied 
as a CD-ROM) allows you to adjust, set, and store a favorite tone in a 
computer.
For detailed information on “ImageDirector3,” refer to the Help 
provided on the supplied CD-ROM in the computer.
Tip
You can adjust with “ImageDirector3” when “Gamma Correction” is set 
to 1.8, 2.0, 2.1, 2.2, 2.4, or 2.6. Adjustment is not possible with Gamma 
7 to 10 and Off.
Color Correction
On: Optimizes midrange colors, based on the color space setting.
Off: The “Color Correction” effect is not applied.
Clear White
Emphasizes vivid whites.
High/Middle/Low: You can adjust the “Clear White” effect.
Off: The “Clear White” effect is not applied.
x.v.Color
Set this item when playing back an x.v.Color video signal.
Set this item to “On” when connecting the unit with equipment that 
supports x.v.Color and playing back an x.v.Color video signal.
For details on x.v.Color, see “About the x.v.Color” (1 page 66).
Tip
Setting x.v.Color to “On” disables black level/gamma adjustment. 
						

							 46
Expert Setting Color Space [COLOR SPACE]
Converts the color space.
BT.709: An ITU-R BT.709 color space, which is used for high-
definition television broadcast or Blu-ray Disc. The color space is 
equivalent to sRGB.
DCI: A color space based on the DCI specification (1 page 66).
Adobe RGB: An approximated Adobe RGB color space, which has a 
wider range of color reproduction than sRGB, and suited for 
displaying an image recorded in Adobe RGB specification.
Color Space 1: The color space suited for watching TV programs and 
video images, such as sport, concerts, etc.
Color Space 2: The color space suited for watching TV programs, sport, 
concerts, and other video images in a bright environment, such as a 
living room.
Color Space 3: The color space suited for watching movies in a bright 
environment, such as a living room. 
						

							
47 
Using the Menus
Screen Menu
You can set the input signal, picture size, aspect mode, etc..
These items may not be available, depending on the type of input signal. For details, see “Input 
Signals and Adjustable/Setting Items” (1 pages 82 to 85).
Item names in brackets represent those printed on the remote control.
Note
Picture Position
[POSITION] You can store up to five combinations of lens settings (focus, window 
size, window position) and aspect ratio.
After setting the lens and aspect, select from “1.85:1,” “2.35:1,” 
“Custom 1,” “Custom 2” or “Custom 3” depending on the 
subtended screen angle, and after confirming, continue by selecting 
“Save,” “Delete,” or “Select.”
Save:
 Stores the current lens settings in the selected position. If a setting 
is already stored in that position, it is overwritten.
Delete:  Deletes the stored setting. After the setting is deleted, “1.85:1,” 
“2.35:1,” “Custom 1,” “Custom 2,” or “Custom 3” in the display 
change to “---.”
Select:  Recalls the settings of the selected position.
Tip
The optimal aspect ratio is preset for each picture position. The aspect 
ratio can be changed and saved for each picture position.
 After you have selected and confirmed the lens position, the lens starts  to move. Do not touch the lens and the area around the lens, otherwise 
it may cause injury or a malfunction.
 If you press any button on the unit while the lens is moving, the lens  stops. In this case, select the lens position again or adjust the lens 
manually.
 When you use a 2.35:1 or a 16:9 subtended screen angle with the  Picture Position function, make sure that the installation position is 
suitable ( 1 page 32).
 The Picture Position function is not guaranteed to reproduce the lens  settings precisely.
Notes 
						

							
 48
Aspect
[ASPECT]You can set the aspect ratio of the picture to be displayed for the 
current input signal (
1 page 34). This item is enabled only when a 
video signal (preset memory numbers 3 to 14 and 93 to 95) 
( 1  page 79) is input.
1.85:1 Zoom:  A 1.85:1 aspect ratio picture is displayed in its original 
aspect ratio, enlarged so that black bands do not appear at the top and 
bottom of the screen.
2.35:1 Zoom:  A 2.35:1 aspect ratio picture is displayed in its original 
aspect ratio, enlarged so that black bands at the top and bottom of the 
screen are as small as possible.
When you select “2.35:1 Zoom” from “Trigger Select 1/2” on the 
Installation   menu, a 12 V signal is output from the TRIGGER 1 or 
2 connector ( 1 page 55).
Normal:  Input video is displayed in its original aspect ratio, enlarged to 
fill the screen. This mode is suitable for viewing 1.78:1 (16:9) and 
1.33:1 (4:3) video.
Stretch:  Displays video that has been squeezed to 1.33:1 (4:3) as 1.78:1 
(16:9) aspect ratio.
V Stretch:  This is the most suitable mode for using a 2.35:1 screen to 
view 2.35:1 video with a commercially available anamorphic lens.
You can select the type of anamorphic lens from “Anamorphic Lens” 
on the Installation   menu.
When you select “V Stretch” from “Trigger Select 1/2” on the 
Installation   menu, a 12 V signal is output from the TRIGGER 1 or 
2 connector ( 1 page 55).
Squeeze:  With this setting, 1.78:1 (16:9) and 1.33:1 (4:3) video will be 
displayed in their correct aspect ratios when you use a commercially 
available anamorphic lens.
Tips
 Selectable aspect modes vary depending on the input signal.
 The aspect cannot be selected for an input signal from a computer.
Over Scan You can select whether or not to display the outline of the picture.
On: Hides the outline of the input picture. Select this setting when noise 
appears along the edge of the picture.
Off:  Projects the whole of the input picture.
Tip
To display the displayable region within the four directions of the screen, 
see “Blanking” on the Installation   menu ( 1 page 56). 
						

							49 
Using the Menus
Adjust SignalYou can adjust the input signal setting.
Phase: Adjusts the pixel/signal phase of an analog computer input 
signal. Adjusts the picture to the point where it looks clearest.
Pitch: Adjusts the horizontal picture size of an analog computer input 
signal.
As the number increases, the picture becomes wider, and as the 
number decreases, the picture becomes narrower. Adjust the setting to 
match the number of dots of the input signal.
Shift:Adjusts the position of the picture.
H: As the setting for H (horizontal) increases, the picture moves 
to the right, and as the setting decreases, the picture moves to 
the left. Use 
						

							 50
Setup Menu
The Setup menu is used to change the factory preset settings, etc.
StatusSets whether or not the on-screen display is displayed.
Set to “Off” to turn off the on-screen displays except for certain 
menus, message when turning off the power, and warning messages.
LanguageSelects the language used in the menu and on-screen displays. 
Available languages are: English, Dutch, French, Italian, German, 
Spanish, Portuguese, Russian, Swedish, Norwegian, Japanese, 
Chinese (Simplified Chinese), Chinese (Traditional Chinese), 
Korean, Thai, and Arabic.
Menu PositionYou can change the position to display the menu on the screen.
Bottom Left: Displays the menu on the bottom left area of the 
screen.
Center: Displays the menu on the center of the screen.
Cooling SettingSets the unit to operate at the prevailing atmospheric pressure.
High: Use this setting when using the unit at an altitude of 1,500 m 
or higher.
Standard: Use this setting when using the unit at normal altitudes.
Tip
When this item is set to “High,” the fan noise becomes slightly 
louder since the number of fan rotations increases.
Standby ModeYou can select the power consumption in standby.
Standard: The power consumption in standby mode is normalized.
Low: The power consumption in standby mode is lowered.
Tip
When this item is set to “Low,” the “PJ Auto Power On” function is 
disabled (The function is set to “Off” and does not appear in the 
menu).
Power SavingSets the power saving mode.
When set to “On,” the unit goes into power saving mode if no signal 
is input for 10 minutes. At that time, the ON/STANDBY indicator 
lights in orange, then the screen becomes dark. In power saving 
mode, the power saving mode is canceled if a signal is input or any 
button on the unit or the remote control is pressed. If you do not 
want to set the unit to power saving mode, select “Off.”