Sony Projector Vpl Vw1000es User Manual

VPL-VW1000ES
4-414-629- 11 
(1)
G:\DATA\4414629111\4414629111VPLVW1000ESUC\00COV_VPLV
W1000ESU\02BCO.fmmasterpage:Back
Cover
© 2011 Sony Corporation
Printed in Japan

Operating Instructions
Before operating the unit, please read this manual thoroughly and retain it for 
future reference.
VPL-VW1000ES
VPL-VW1000ES
4-414-629- 11 
(2)
D:\Sony\4414629112\4414629112VPLVW1000ESUC\00COV_VPLVW
1000ESU\01COV.fmmasterpage:Back
Cover
4-414-629-11 (2)
Video Projector

VPL-VW1000ES
4-414-629-11(2) 

 2
To reduce the risk of fire or 
electric shock, do not expose 
this apparatus to rain or 
moisture.
To avoid electrical shock, do 
not open the cabinet. Refer 
servicing to qualified 
personnel only.
THIS APPARATUS MUST BE 
EARTHED.
For the customers in the U.S.A. and 
Canada
WARNING:
Using this unit at a voltage other than 120 V 
may require the use of a different line cord or 
attachment plug, or both. To reduce the risk 
of fire or electric shock, refer servicing to 
qualified service personnel.
For...

3 
Afin de réduire les risques 
d’incendie ou d’électrocution, 
ne pas exposer cet appareil à 
la pluie ou à l’humidité.
Afin d’écarter tout risque 
d’électrocution, garder le 
coffret fermé. Ne confier 
l’entretien de l’appareil qu’à 
un personnel qualifié.
CET APPAREIL DOIT ÊTRE 
RELIÉ À LA TERRE.
Pour les clients au Canada
Cet appareil numérique de la classe B est 
conforme à la norme NMB-003 du Canada.
Pour les clients en Europe
Le fabricant de ce produit est Sony 
Corporation, 1-7-1 Konan,...

 4
Caution: Do not handle damaged or leaking 
Lithium-Ion batteries.
Für Kunden in Deutschland
Entsorgungshinweis: Bitte werfen Sie nur 
entladene Batterien in die Sammelboxen 
beim Handel oder den Kommunen. Entladen 
sind Batterien in der Regel dann, wenn das 
Gerät abschaltet und signalisiert „Batterie 
leer“ oder nach längerer Gebrauchsdauer der 
Batterien „nicht mehr einwandfrei 
funktioniert“. Um sicherzugehen, kleben Sie 
die Batteriepole z.B. mit einem 
Klebestreifen ab oder geben Sie die...

5 
Table of Contents
Precautions ......................................... 7
Front/Right Side  ................................. 8
Rear/Bottom ....................................... 9
Remote Control  ................................ 10
Unpacking ........................................ 11
Inserting the Batteries into the Remote 
Control ............................................. 11
Connecting the AC Power Cord ....... 12
Preparation 1: Installing the Unit  ..... 13
Before Setting Up the Unit...

 6
Operating the Unit from a 
Computer .................................... 62
Using the E-mail Report 
Function ...................................... 63
About the Control for HDMI  ........... 65
About DCI specification  .................. 66
About the x.v.Color  ......................... 66
About the simulated 3D feature  ....... 66
Troubleshooting ............................... 67
Warning Indicators  ..................... 70
Message Lists  ............................. 71
Replacing the Lamp and...

7 
Precautions
On safety
 Check that the operating voltage of your 
unit is identical with the voltage of your 
local power supply.
 Should any liquid or solid object fall into 
the cabinet, unplug the unit and have it 
checked by qualified personnel before 
operating it further. 
 Unplug the unit from the wall outlet if it is 
not to be used for several days. 
 To disconnect the cord, pull it out by the 
plug. Never pull the cord itself. 
 The wall outlet should be near the unit and 
easily accessible....

 8
Front/Right Side
You can use the buttons on the control panel with the same names as those on the remote 
control to operate the unit.
Location of Controls
INPUT button (1 page 27) MENU button (1 page 39)ON/STANDBY 
indicator 
(1 page 18)
Remote control detection area
?/1 (ON/STANDBY) button (1 page 18)
LAMP/COVER indicator 
(1 page 70) M/m/

9 
Location of ControlsRear/Bottom
Ventilation holes 
(exhaust) (1 page 14) Lamp cover (1 page 73)
AC IN socket (1 page 12)
Projector suspension 
support attaching hole 
(1 page 91) Adjusters (1 page 21)
Ventilation holes (intake) 
(1 page 14) Remote control detector 
(1 page 17)
Ventilation holes (intake) 
(1 page 14) AC inlet cover (supplied)
For details on how to attach the 
AC inlet cover, see page 12. 

 10
Remote Control
INPUT button (1 page 27)
Infrared transmitter
?/1 (ON/STANDBY) 
button (1 page 18)
COLOR SPACE button
(1 page 46)M/m/