Sony Projector Vpl Vw1000es User Manual

51 
Using the Menus
Lamp SettingWhen replacing the lamps, set the desired lamp setting 
(1 page 75). 

 52
Function Menu
The Function menu is used for changing the settings of the various functions of the unit. 
3D SettingsYou can change the settings of the 3D function.
2D-3D Display Sel.: For Switching the video images to “2D” or 
“3D.”
Auto: Displays 3D video images when HDMI signals with 3D 
information are input. Displays 2D video images when other 
signals are input.
3D: Displays 3D video images according to the 3D system 
selected in “3D Format.” However, when HDMI signals with 3D 
information are...

53 
Using the Menus
3D Settings3D Brightness: For adjusting the brightness of the picture when 
watching 3D video images. You can select the brightness “High” 
or “Standard.”
3D Depth Adjust: For adjusting the depth of the 3D video images 
on the screen. The setting can be made only when a 3D Format 
other than “Simulated 3D” is selected.
We recommend that “3D Depth Adjust” be set to “0.” The 3D 
video images may be difficult to perceive, depending on the 
setting of “3D Depth Adjust.”
Simulated 3D...

 54
HDMI SettingDevice List: Lists all the Control for HDMI compatible equipment 
connected to the unit.
When “Enable” is selected, the Control for HDMI setting of Sony 
equipment (AV amplifier, video, etc.), which is compatible with 
“Control for HDMI - Easy Setting,”* will also be effective.
* “Control for HDMI - Easy Setting” is a function that makes the 
Control for HDMI setting of equipment connected to HDMI input 
of the unit effective as well when the Control for HDMI setting of 
the unit is...

55 
Using the Menus
Installation Menu
The Installation menu is used for changing the installation settings.
Image FlipFlips the picture on the screen horizontally and/or vertically. 
HV: Flips the picture horizontally and vertically.
H: Flips the picture horizontally. 
V: Flips the picture vertically.
Off: The picture does not flip.
Use this item for installation for the backside projection or ceiling 
installation.
Lens ControlAvoids any operation of the lens such as “Lens Focus,” “Lens 
Zoom,” and...

 56
BlankingThis feature allows you to adjust the displayable region within 
the four directions of the screen.
Select the edge to adjust by highlighting Left, Right, Top, or Bottom 
using the M/m buttons.
Adjust the amount of blanking using the 

57 
Using the Menus
Panel AlignmentThis feature allows you to adjust the gaps in the color of 
characters or the picture.
When set to “On,” “Adjust Color” and “Pattern Color” can be 
assigned and adjusted. 
Adjust Item: Selects how to make adjustments from below.
Shift: Shifts the whole picture and makes adjustments.
Zone: Selects the desired range and makes adjustments.
Adjust Color: Assigns the desired color to adjust the gaps in color. 
Select “R” (Red) or “B” (Blue) to make adjustments based on 
“G”...

 58
Network SettingPerform internet protocol settings.
Set this when accessing from a computer (1 page 60) or using the 
supplied gamma control adjustment software “ImageDirector3.”
IP Address Setup: Select the IP address setting method.
Auto (DHC P): The IP address is assigned automatically from the 
DHCP server such as a router.
Manual: Specify the IP address manually.
When “Manual” is selected for “IP Address Setup,” select the item 
with the 

59 
Using the Menus
Information Menu
The Information menu displays the model name, serial number, the horizontal and vertical 
frequencies of the input signal and the cumulated hours of usage of the lamp.
 fH (horizontal frequency) and fV (vertical frequency) may not be displayed depending on the input 
signal used on the unit.
 You cannot adjust or change the displays listed above.
This unit has 35 types of preset data for input signals (the preset memory). When the preset 
signal is input, the unit...

 60
Connection to the network allows you to operate the following features:
 Checking the current status of the unit via a Web browser.
 Remotely controlling the unit via a Web browser.
 Receiving the e-mail report for the unit.
 Making the network settings for the unit.
 Supports network monitoring and control protocol (Advertisement, PJ Talk, AMX 
DDDP [Dynamic Device Discovery Protocol]).
 The menu displays used for the explanation below may be different depending on the model you 
are using....