Sony Klv 30hr3 Operating Instructions

22
AV2 OUTPUT
The AV2 Ouptut option allows you to select the source to be output from the Scart connector 
2/2 so that you can record from this Scart the signal coming from the TV or the signal that is being viewed 
on the TV.
If your VCR or DVD recorder supports SmartLink, this procedure is not necessary.
To do this: 
Once you have entered into the Features menu as it is explained in the previous page and after selecting the option, 
press 
OK. Then press v or V to select the desired output signal:
TV...

23
GB
The Set Up Menu
The “Set Up” menu allows you to alter various 
options on this TV.
To do this: 
Press the 
MENU button and press v three times 
to select   , then press 
OK to enter this menu. 
Next, press 
v or V to select the desired option 
and press 
OK. Finally, read below how to 
operate into each option.
LANGUAGE
This option allows you to select the language that menus are displayed in. 
To do this: 
After selecting the option, press 
OK and then proceed in the same way as in step 3 of the...

24
PROGRAMME LABELS
This option allows you to name a channel using up to five characters (letters or numbers).
To do this: 
1Once you have entered the Set Up menu as it is explained in the previous page and after selecting this option, 
press OK, then press v or V to select the programme number with the channel you wish to name. Next press OK.
2With the first element of the Label column highlighted, press OK and v, V, B or b to select the letter, next 
press OK.
When you have finished, press v, V, B or b...

25
GB
The Manual Programme Preset Menu
The “Manual Programme Preset” option in the 
Set Up menu allows you to manually tune 
individual channels.
To do this: 
Press the 
MENU button and press v three times 
to select   , then press 
OK to enter the Set 
Up menu. Next, press 
v or V to select 
Manual Programme Preset and press 
OK. 
Finally, read below how to operate into each 
option.
The Manual Programme Preset option allows you to:
a)Preset channels or the VCR channel one by one to the programme order...

26
c)Fine tune the broadcast reception. Normally the automatic fine tuning (AFT) will give the best possible picture, 
however you can manually fine tune the TV to obtain a better picture reception in case the picture is distorted.
To do this: 
While watching the channel (TV Broadcast) you wish to fine tune, and once you have entered the “Set Up” menu 
as it is explained on page 23 and after selecting the Manual Programme option, press
 OK. Then press v or V 
to select the AFT option and press b. Next...

27
GB
Other Functions
Sleep Timer
This function allows you to set the TV to switch itself automatically to standby mode after a 
specified time period. The following time periods can be selected: 30, 60, 90 and 120 minutes.
To do this:
Press the  button on the remote control repeatedly until the desired time period appears on the 
screen.
When the Sleep Timer feature is on, the  (Standby/Sleep) indicator on the TV lights up in red.
To cancel the Sleep Timer feature:
Press the  button on the remote...

28
Teletext
Teletext is an information service transmitted by most TV stations. The index page of the 
Teletext service (usually page 100) gives you information on how to use the service. To operate 
Teletext, use the remote control buttons as indicated below.
Make sure you use a channel (TV Broadcast) with a strong signal, otherwise Teletext errors may 
occur.
To switch on Teletext
After selecting the TV channel which carries the Teletext service you want to view, press  .
Each time you press  , the...

29
GB
Additional Information
Connecting Equipment to the TV
• Using the following instructions you can connect a wide range of optional equipment to  your TV set. 
• Connecting cables are not supplied.
P
layS
ta
tion2
F
G
E
H
4
4
o4
A
B
D
C
* “PlayStation” is a product of Sony 
Computer Entertainment, Inc.
* “PlayStation” is a trademark of 
Sony Computer Entertainment, Inc.
To avoid snowy 
picture, do not connect 
external equipment to 
connectors A and B 
at the same time.
8mm/Hi8/
DVC
camcorderS...

30
Connecting a VCR
To connect a VCR, please refer to the section “Connecting the aerial and VCR” of this instruction manual on page 14. 
Connecting a VCR or a DVD recorder that supports SmartLink
SmartLink is a direct link between the TV set and a SmartLink compatible VCR/DVD recorder. For more 
information on SmartLink, please refer to the instruction manual of your SmartLink VCR/DVD recorder.
If you use a VCR or a DVD recorder that supports SmartLink, please connect the VCR or the DVD recorder to the...

31
GB
Viewing pictures from equipment connected to the TV
1Connect your equipment to the designated TV socket, as indicated on page 29.
2Switch on the connected equipment.
3To watch the picture from the connected equipment, press the  /   button repeatedly until 
the correct input symbol appears on the screen.
Symbol    Input Signals
 1• Audio / video input signal through the Scart connector F
 1• RGB input signal through the Scart connector F. This symbol appears only if 
an RGB source has been...