Sony Klv 30hr3 Operating Instructions

12Overview & Installation
Overview of the TV indicators
Inserting Batteries into the Remote Control
Make sure you insert the supplied batteries using the correct polarities.
Always remember to dispose of used batteries in an environmental friendly way.
To operate the remote 
control, point it towards 
this receiver.Lights up in green when the 
TV is switched on. 
• Lights up in red when 
the TV is in standby 
mode.
• Flashes red when a 
button is pressed on the 
remote control.
• Lights up in red when...

13
GB
Overview & Installation
Removing the Rear Cover
When you connect the cables, remove the rear cover of the TV set. Be sure to attach the rear cover back on the TV 
set after you finish connecting the cables.
Removing the rear cover
Hold the rear cover as illustrated below and pull off one side of the lower part of the cover towards you first. Then, 
detach the upper part of the cover from the TV set.
Attaching the rear coverHold the rear cover as illustrated below, fitting the four detents on the...

14
Connecting the Aerial and VCR
or
VCR
Overview & Installation
Make sure to connect the aerial before the Scart.
For more details regarding VCR connection, refer to “Connecting Equipment to the TV” on page 29.
 

15
GB
1 Connect the TV plug to the mains socket (220-240V 
AC, 50Hz).
2The first time that the TV set is connected, it is usually 
turned on. If the TV is off, press the  on/off button to 
turn on the TV.
The first time you switch on the TV, a Language menu 
appears automatically on the TV screen.
3Press the V, v, B or b buttons on the remote control to select your 
language, then press the OK button to confirm your selection. From 
now on all the menus will appear in your chosen language. 
4The Country...

16
5 The Auto Tuning menu appears on the screen. Press the OK 
button to select Yes.
6The TV starts to automatically search and store all
 available broadcast channels for you. 
  This procedure could take some minutes. Please be  patient 
and do not press any buttons, otherwise automatic tuning 
will not be completed.
If no channels were found during the auto tune process, a 
message appears automatically on the screen asking you to 
connect the aerial. Check the aerial connection (refer to 
page 14)....

17
GB
TV Functions
Introducing and Using the Menu System
Your TV set uses an On-Screen menu system to guide you through the operations. Use the following buttons 
on the Remote Control to operate the menu system: 
1To switch on the menu screens:
Press the 
MENU button to switch the first level menu on.
Picture AdjustmentPicture Mode
Contrast
Brightness
Colour
Sharpness
Backlight
Reset
Noise Reduction
Colour Tone
Select:Set:OKEnd:MENU
Personal
80
50
50
50
70
Auto
Normal
TV Functions
2To navigate through...

18
The Picture Adjustment Menu
The “Picture Adjustment”  menu allows you to 
alter the picture settings.
To do this:
Press the 
MENU button and then press OK to 
enter this menu. Next, press 
v or V to select the 
desired option and press 
OK. Finally, read below 
how to operate into each option.
Picture Mode  This option allows you to customise the picture mode based on the programme 
you are watching. After selecting this option press 
OK. Next, press repeatedly v 
or 
V to select:   
Live  (for live...

19
GB
ResetPress OK to reset the picture to the factory preset levels.
Noise This option is set to Auto to automatically reduce the snowy picture visible in the weak broadcast
Reduction  signal. However, it can be modified. After selecting this option press 
b. Next, press v or V to 
select Off. Finally, press 
OK to store.
Colour ToneThis option allows you to alter the tint of the picture. After selecting this option press b. Next, press 
repeatedly 
v or V to select: Warm (gives the white colours a red...

20
The Sound Adjustment Menu
The “Sound Adjustment” menu allows you to 
alter the sound settings.
To do this: 
Press the 
MENU button and press v to select 
, then press 
OK to enter this menu. Next, 
press 
v or V to select the desired option and 
press 
OK. Finally, read below how to operate 
into each option. 
SoundThis option allows you to customise the sound effect. After selecting this
Effectoption press 
OK. Next, press repeatedly v or V to select: 
NaturalEnhances clarity, detail and presence of...

21
GB
The Features Menu
The “Features” menu allows you to alter 
various settings of the TV.
To do this: 
Press the 
MENU button and press v twice to 
select  , then press 
OK to enter this menu. 
Next, press 
v or V to select the desired option 
and press 
OK. Finally, read below how to 
operate into each option.
POWER SAVING
This option allows you to reduce the power consumption of this TV.
To  d o  t h i s :
After selecting the option, press 
OK. Then, press v or V to select Reduce. Next, press OK to...