Smarthome Fx 416 Instruction Manual

KCE Technology Corporation65 Intercom Only ExtensionYou may restrict an extension to an Intercom dialing only station.  The extension is not allowed to
make any outside calls.
How:
To disable CO lines access
   JKL
5
  GHI
4DEF
3ABC
21
  #
  beep
beepPRS
7
  ABC
2OPER
0MNO
6
    ABC
2WXY
9OPER
0
  OPER
0
  #
  beep
beep   1. Lift the handset
   2. Validate the password
   3. Dial [*7 206 * 290 0 #], where 206 is the extension number, 290 means all
CO lines and 0 is to disable
   4. Wait for confirmation...

KCE Technology Corporation66 Verifying Programmed Prefix NumbersThe system will play back a prefix number you have programmed for the call restriction.
How:
To play back prefix for Global level
   JKL
5
  GHI
4DEF
3ABC
21
  #
  beep
beepPRS
7
  ABC
2JKL
5OPER
0
  DEF
3
    #
  beep long  1. Lift the handset
   2. Validate the password
   3. Dial [*7 250 {G} *#], where {G} is the group number which may be 1 to 8
   4. System plays back the prefix
   Example: Dial [*72503*#] to play back the 3rd
 prefix...

KCE Technology Corporation67 Call Restriction OverrideAny authorized user may call the restricted area by entering the supervisor password to bypass the
blocked number.
How:
Prefix Dialing Mode
   JKL
5
   GHI
4DEF
3ABC
21
   #
   beep
beepWXY
9
   COtone   DIAL12
3
456
789
0#   talk   1. Lift the handset
   2. Validate the password
   3. Dial [9]
   4. Wait for dial tone
   5. Dial telephone number
Direct Dialing Mode
   ABC
21  beep
beepJKL
5
   GHI
4DEF
3ABC
21
   #
   beep
beepWXY
9
   COtone...

KCE Technology Corporation68 Setting Time Limit for Nagging OptionYou will hear the warning beeping tones for the outgoing calls that exceed the time limit.  The
minimum time limit is 3 minutes and the maximum time limit you can set is 27 minutes.  The time
limit increases in 3 minutes increment.  Once the call exceeds the time limit, the parties in the
conversation will hear 3 short beep tones in 10 seconds interval for 3 minutes.  After 3 minutes
over the time limit, the short beep tones become long...

KCE Technology Corporation69 Setting Time Limit for Nagging Then Cut OptionFor every outgoing call that is 6 minutes over the time limit, the call will be terminated by the
system automatically if NTC (Nagging Then Cut) is set.  The following is the reference table of
length of the time limit and the factor keys.
Key123456789Time Limit
(minutes)369121518212427How:
To set time limit for NTC
   JKL
5
  GHI
4DEF
3ABC
21
  #
  beep
beepPRS
7
  ABC
2OPER
0MNO
6
    ABC
2PRS
7PRS
7
  JKL
5
  #
  beep
beep   1....

KCE Technology Corporation70 Flexible Settings for No Answer/No Selection
The FX-416 provides 2 flexible settings handling unanswered incoming calls or the incoming call
that caller did not make any selection.  The FX-416 will announce “Invalid Input” after it rang for
90 seconds if no one answered the call.  You may enter a control command or make a selection
after the “Invalid Input” announcement.  The different settings are designed to meet users various
needs.
Ring-AllWhenever caller did not make any...

KCE Technology Corporation71 Special Features
Automatic FAX ConnectionIf an incoming call is from a FAX with a high pitch tone beeping every 3 seconds, the system will
stop playing the voice announcement and automatically route it to the extension that is dedicated
as a FAX line.  You may assign any one of the 16 extensions as a dedicated FAX line.
Note: You have to program from another extension other than the extension that is to be assigned
as a FAX line.
How:
To assign an extension as a FAX line...

KCE Technology Corporation72 Assigning Voice Mail ChannelYou may assign a voice mail channel to any extension.  The FX-416 supports 2 voice mail
channels.  The following is the reference table for the access codes:
Channel No.Any Available Channel12Access Code245246247Note: You have to program from another extension other than the extension that is to be assigned
as a voice mail channel.
How:
To assign voice mail channel #1JKL
5
  GHI
4DEF
3ABC
21
   #
   beep
beepTUV
8
  ABC
2GHI
4MNO
6
    ABC
21ABC
2...

KCE Technology Corporation73 DoorphoneThe FX-416 system currently supports 2 doorphones.  Extension 15 and extensions 16 are not
only regular phone extensions, but also the extensions that supply 9V power for doorphone
application.  If a doorbell is pressed, the system will ring all unbusy extensions.  The following is
the reference table of the access codes assigned to the doorphones:
Doorphone #12Access Code251251Note: You have to program from another extension other than the extension that is to be...

KCE Technology Corporation74 Forwarding Doorphone to Another Phone NumberYou may forward the doorphone calls to another phone number when there is no one present to
answer the calls.  The FX-416 will use an available CO line to dial the phone number pre-
programmed by you, then connect the visitor to the specified phone number.  The phone number
will not be erased even when the function is disabled.  You may change the phone number by re-
programming a new number into the system.
How:
To forward to...