Smarthome Fx 416 Instruction Manual

KCE Technology Corporation25 Current Call on Hold and Automatic Call ReturnTo put current call into hold queue, then dial back the last person who called you when you were
not able to answer the phone in time.
Note: Automatic Call Return Only works with Caller ID, so you must subscribe to the Caller ID
service from your local telephone company.
How:
   talk   flash   dialtone  ABC
2DEF
3JKL
5
  talk   1. Flash the hookswitch to put the current caller on hold
   2. Will hear system dial tone
   3. Dial...

KCE Technology Corporation26 Disconnecting Current CallTo hang up current call.
How:
   talk   flash   dialtone  ABC
2TUV
8OPER
0
   1. Flash the hookswitch to put the current call on hold
   2. Will hear system dial tone
   3. Dial [280] to hang up the current call that was just put on hold
Transferring CallTo transfer the outside caller to an extension.
How:
Notify the other extension
   talk   flash   dialtone  ABC
2OPER
0JKL
5
  talk   flash  ABC
2TUV
8ABC
2
   1. Flash the hookswitch to put the...

KCE Technology Corporation27 Transferring Call to Extension’s Voice MailboxTo transfer the outside caller to an extension’s voice mailbox.
How:
   talk   flash   dialtone  ABC
2TUV
8JKL
5
  ABC
2OPER
0DEF
3
   1. Flash the hookswitch to put the outside caller on hold
   2. Will hear system dial tone
   3. Dial [285 203] to transfer the outside caller to the voice mailbox of extension 203
Transferring Call to Ring AllTo transfer the outside caller to any available extension.
How:
   talk   flash...

KCE Technology Corporation28 Transferring Call to Any Available CO LineTo transfer the outside caller to a CO line.  The outside caller dials another phone number by
using the second CO line.
How:
   talk   flash   dialtone  ABC
2TUV
81
  ABC
2WXY
9OPER
0
   1. Flash the hookswitch to put the outside caller on hold
   2. Will hear system dial tone
   3. Dial [281 290] to connect the outside caller to an available CO line, then dial
another phone number
Transferring Call to an External Phone NumberTo...

KCE Technology Corporation29 Convenient Station Programming
You can program your extension to fit your needs.  The FX-416 has two types of passwords,
Supervisor password and Extension password.  You need to program a password for your
extension in order to protect the settings from being changed by other users.  You may program
your extension from any extension with the password.  Once you have the extension password, all
the functions in this section can also be accessed from the remote (dialing in...

KCE Technology Corporation30 Canceling Extension PasswordPassword feature may be disabled if the password protection is not needed.  You can cancel your
own extension password from any extension.
How:
   JKL
5
  GHI
4DEF
3ABC
21
  #
  beep
beepJKL
5
    #
  beep
beep   1. Lift the handset
   2. Validate the password (extension password, e.g. 4321)
   3. Wait for confirmation tone, then hear system dial tone
   4. Dial [*5*#]
   5. Wait for confirmation tone
Changing PasswordValidate the password first...

KCE Technology Corporation31 Call Transfer  While Busy or No AnswerWhile the extension is busy or has no answer, you may program the incoming call to be
transferred to another extension, to the Operator Station or to a Voice Mailbox (if equipped with
a voice mail system).  You may also program your extension to go to Ring-All mode or to repeat
the greeting message if it is busy or has no answer.
How:
To transfer to other extension
      JKL
5
  GHI
4DEF
3ABC
21
  #
  beep
beep OPER
0OPER
0
   ABC
21DEF...

KCE Technology Corporation32 To repeat Greeting Message
      JKL
5
  GHI
4DEF
3ABC
21
  #
  beep
beepOPER
0OPER
0
   ABC
2MNO
6OPER
0
  #
  beep
beep   1. Lift the handset
   2. Validate the password if a password has been programmed in, otherwise go to step 3
   3. Dial [*00 260 #]
   4. Wait for confirmation tone
To ring all extensions
      JKL
5
  GHI
4DEF
3ABC
21
  #
  beep
beepOPER
0OPER
0
   ABC
2JKL
5OPER
0
  #
  beep
beep   1. Lift the handset
   2. Validate the password if a password has been...

KCE Technology Corporation33 Do Not DisturbEach extension can be individually programmed to block incoming calls, intercom and alarm
clock.
How:
To turn on (Do Not Disturb function enabled)
      JKL
5
  GHI
4DEF
3ABC
21
  #
  beep
beep1OPER
0
  #
  beep
beep      1. Lift the handset
   2. Validate the password if a password has been programmed in, otherwise go to step 3
   3. Dial [*10#]
   4. Wait for confirmation tone
   5. Hang up
To turn off (Do Not Disturb function disabled)
      JKL
5
  GHI
4DEF...

KCE Technology Corporation34 Extension Included in Ring-AllOnce an extension is excluded from Ring-All, you may reset the extension to ring when Ring-All
occurs.  The default setting is that all extensions will ring during Ring-All.
How:
To include an extension
      JKL
5
  GHI
4DEF
3ABC
21
  #
  beep
beep11
  ABC
2JKL
5OPER
0
  #
  beep
beep      1. Lift the handset
   2. Validate the password if a password has been programmed in, otherwise go to step 3
   3. Dial [*11 250 #]
   4. Wait for...