Sharp Xv Z12000 Projector User Manual

-40
Menu Bar Items
This list shows the items that can be set in the projector.

 INPUT 1 / 2 / 5 Mode
* In INPUT 5, the items in “Signal Type” are “D. PC RGB”, “D. PC Comp.”, “D. Video RGB”, “D. Video Comp.”
“A. RGB” and “A. Comp.”.
Note
•The resolution, vertical frequency and horizontal frequency figures displayed above are for example
purposes only.
•Picture adjustment settings differ depending on the type of input signal.
Signal Type
RGB
Component*
Standard
Black Detail
Dynamic Gamma
Custom 1
Custom...

Basic Operation
-41

 INPUT 3 / 4 Mode
English
Deutsch
Español
Nederlands
Français
Italiano
Svenska
Português
Page 74 +30 –30
+30 –30
+30 –30
+30 –30
+30 –30
11000 5000
Main menu Sub menu
Main menu Sub menu
Picture
Page 46
Contrast
Bright
Color
Tint
Sharp
CLR Temp
Specials
PRJ Mode
Front
Ceiling + Front
Rear
Ceiling + Rear RS-232C
9600 bps
38400 bps
115200 bps
Language
Page 36
Status
+30 –30+30 –30
+30 –30
C.M.S. Position
Target 
Lightness
Chroma
Hue
Reset (This Color)
Reset (All Colors)
View Settings[R]...

This projector has two sets of menu screens that allow you to adjust the image and various
projector settings.
You can operate the menus from the projector or remote control using the following proce-
dure.
Using the Menu Screen
Menu screen for INPUT 1,
INPUT 2 or INPUT 5 ModeMenu screen for INPUT 3 or
INPUT 4 Mode
Menu Bar
(Main Menu)
" "" "
"Menu Screen
Menu Selections
(Adjustments)
1Press .
•The menu screen is displayed.
Note
•The “Picture” menu screen for the
selected input mode...

Basic Operation
-43
2Press 
\ \\ \
\ or 
| || |
| to select the
menu you want to adjust.
Note
•For details on the menus, see the
tree charts on pages 40 and 41.
3Press 
" "" "
" or 
' '' '
' to select the item
you want to adjust.
Note
•To display a single adjustment item,
press 
 after selecting the item.
Only the menu bar and the selected
adjustment item will be displayed.
Then if you press " or ', the fol-
lowing item (“Bright” after “Con-
trast”) will be...

 Menu screen
Menu Selections
(Settings)
1Press .
•The menu screen is displayed.
Note
•The “Picture” menu screen for the
selected input mode is displayed.
•The on-screen displays shown on
the lower right are displayed when
INPUT 1, 2 or 5 mode is selected.
2Press 
\ \\ \
\ or 
| || |
| to select the
menu you want to adjust.
Note
•For details on the menus, see the
tree charts on pages 40 and 41.
3Press 
" "" "
" or 
' '' '
' to select the
item you want to set.
Note...

Basic Operation
-45
4Press 
| || |
|.
•The cursor shifts to the sub menu.
5Press 
" "" "
" or 
' '' '
' to select the set-
ting of the item displayed in the
sub menu.
6Press .
•The item selected is set.
Note
•Some adjustment items will display
a confirmation message.
When setting an item, press \ or
| to select “Ye s” or “OK” and then
press 
.
•Use 
 to select “ON” or “OFF” for
the item of “Economy Mode”.
•Use 
 to select setting for the item
of “Specials” in the...

Adjusting the Picture
You can adjust the projector’s picture to your preferences with the following picture settings.
-46
Selecting the Picture
Position
This function allows you to select the picture
position in accordance with brightness of the
room or content of the software to be played.
There are three preset positions and three po-
sitions for custom settings.
In all picture positions, items on the “Picture”
menu can be adjusted and saved. When sav-
ing, select a picture position before setting on...

Basic Operation
-47
Adjusting Image Prefer-
ences
Adjust the “Picture” menu on the
menu screen.
➝For operating the menu screen, see
pages 42 to 45.
Note
•Picture adjustment settings differ depend-
ing on the type of input signal.
•Some items may not be adjustable de-
pending on the combination of the INPUT
mode and “Signal Type” setting.
Contrast
Bright
Color
Tint
Sharp
CLR TempFor adjusting the contrast level
For adjusting the brightness of an image
For adjusting the color intensity of an image
For...

-48
Selecting the C.M.S.
Position
This function allows you to select the desired
color reproduction mode.
Select “C.M.S. Position” in the “Picture”
menu on the menu screen.
➝For operating the menu screen, see
pages 42 to 45.
Note
•Color can be adjusted in greater detail with
“C.M.S.” on the menu screen. See page
54 for details.
Special Settings
Select “Specials” in the “Picture” menu on the
menu screen.
➝For operating the menu screen, see
pages 42 to 45.
-48
Adjusting the Picture
Description
For...

Basic Operation
-49
IP Mode
This function allows you to select the progres-
sive display of a video signal. The progres-
sive display projects a smoother video image.
Select “IP Mode” in the “Specials”
menu on the “Picture” menu screen.
•“IP Mode” is switched by pressing 
.
➝For operating the menu screen, see
pages 42 to 45.
*The film source is a digital video recording with the
original encoded as is at 24 frames/second. The pro-
jector can convert this film source to progressive video
at 60...