Sharp Xv Z12000 Projector User Manual

-50-50
Adjusting the Picture
Emphasizing the
Contrast
This function emphasizes the bright portions
of images to obtain a higher contrast image.
Select “White Emph” in the “Specials”
menu on the “Picture” menu screen.
•“White Emph” is switched “ON” and
“OFF” by pressing 
.
➝For operating the menu screen, see
pages 42 to 45.
Description
Emphasizes the bright portions
of images.
Disables “White Emph”.
Selected Item
(ON)
(OFF)
Selected Item
(OFF)
(Level 1)
(Level 2)
(Level 3)
Description
Disables “DNR”.
Set...

Basic Operation
-51
Emphasizing Outlines
in the Image (DFC)
This function allows you to select features for
outlines in the image.
Select “DFC” in the “Specials” on the
“Picture” menu screen.
•“DFC” is switched by pressing 
.
➝ For operating the menu screen, see
pages 42 to 45.
Description
Disables “DFC”.
Emphasize outlines a little
Emphasize outlines most
Selected Item
(OFF)
(Level 1)
(Level 2)
(Level 3)
Resetting All Adjust-
ment Items
This function allows you to reset all adjust-
ment items to the...

Adjusting the Gamma
Use this function to select the gamma position and adjust the gamma curve for finer image
adjustment.
Selecting the Gamma
Position
Select “Gamma Position” in the
“Gamma” menu on the menu screen.
➝For operating the menu screen, see
pages 42 to 45.
Note
•The gamma position you set in this menu
can be selected in the “Gamma Position”
in the “Picture” menu.
•Select “Custom 1” or “Custom 2” to make
the more detailed gamma setting.
•For selecting “SVM Gamma”, refer to the
SharpVison Manager...

Basic Operation
-53
Selected Item Description\ button| || |
| button
R-Gamma(Red Gamma)
G-Gamma
(Green Gamma)
B-Gamma(Blue Gamma)
R-Gain
(Red Gain)
G-Gain
(Green Gain)
B-Gain
(Blue Gain)
R-Offset
(Red Offset)
G-Offset
(Green Offset)
B-Offset
(Blue Offset)For adjusting the display characteristic of red color
For adjusting the display characteristic of green color
For adjusting the display characteristic of blue color
For adjusting the contrast level of red color
For adjusting the contrast level of green...

Color Management System (C. M. S.)
This function allows you to individually adjust the display characteristics of six colors (R:
Red, Y: Yellow, G: Green, C: Cyan, B: Blue, M: Magenta) .
RedCyan
YellowBlue
GreenMagenta
Selecting the C.M.S.
Position
Select “C.M.S. Position” in the “C.M.S.”
menu on the menu screen.
➝For operating the menu screen, see
pages 42 to 45.
Note
•If “Standard” is selected for “C.M.S. Posi-
tion”, other items (e.g. Target) cannot be
adjusted.
Selecting the Target
Color
Select...

Basic Operation
-55
Setting the Brightness
of the Target Color
Select “Lightness” in the “C.M.S.”
menu on the menu screen.
➝For operating the menu screen, see
pages 42 to 45.
Setting the Chromatic
Value of the Target
Color
Select “Chroma” in the “C.M.S.” menu
on the menu screen.
➝For operating the menu screen, see
pages 42 to 45.
Setting the Hue of the
Target Color
Select “Hue” in the “C.M.S.” menu on
the menu screen.
➝For operating the menu screen, see
pages 42 to 45.
XV_Z12000_E_US_p42_60.p6503.9.24,...

Color Management System (C.M.S.)
Resetting User-Defined
Color Settings
Select “Reset (This Color)” or “Reset
(All Colors)” in the “C.M.S.” menu on
the menu screen.
➝For operating the menu screen, see
pages 42 to 45.
Overview of All Color
Settings
Select “View Settings” in the “C.M.S.”
menu on the menu screen.
➝For operating the menu screen, see
pages 42 to 45.
Description
“Lightness”, “Chroma” and “Hue”
of the color selected for “Target”
are reset to the default setting.
“Lightness”, “Chroma” and
“Hue”...

Basic Operation
-57
Adjusting Computer Images
Use the Fine Sync function in case of irregularities such as vertical stripes or flickering in
portions of the screen.
When Auto Sync is OFF
When “Auto Sync” is “OFF”, interference
such as flickering or vertical stripes may oc-
cur if displaying tilings or vertical stripes.
Should this occur, adjust “Clock”, “Phase”,
“H-Pos” and “V-Pos” for obtaining an opti-
mum image.
Select “Clock”, “Phase”, “H-Pos” or “V-
Pos” in the “Fine Sync” menu  on the
menu screen....

Selecting Adjustment Settings
Adjustment settings stored in the projector
can be easily accessed.
Select “Select Setting” in the “Fine
Sync” menu on the menu screen.
➝For operating the menu screen, see
pages 42 to 45.
Note
•If a memory position has not been set, a
resolution and frequency setting will not
be displayed.
•When selecting a stored adjustment set-
ting with “Select Setting”, you can set the
projector in the stored adjustments.
Special Mode Settings
Ordinarily, the type of input signal is...

Basic Operation
-59
Checking the Input Signal
This function allows you to check the current
input signal information.
Select “Signal Info” in the “Fine Sync”
menu on the menu screen.
➝For operating the menu screen, see
pages 42 to 45.
Auto Sync Adjustment
Used to automatically adjust a computer image.
Select “Auto Sync” in the “Fine Sync”
menu on the menu screen.
➝For operating the menu screen, see
pages 42 to 45.
Note
When setting to “ Normal” or
“
 High Speed”:
•Auto Sync adjustment will occur when...