Sharp Xv Z12000 Projector User Manual

SHARP CORPORATION
Printed in Japan
Imprimé au Japon
Impreso en Japón
Impresso no Japão
TINS-A970WJZZ 
1
XV-Z12000
OPERATION MANUAL
MODE D’EMPLOI
MANUAL DE OPERACION
MANUAL DE OPERAÇÃOXV-
Z12000
PROJECTOR
PROJECTEUR
PROYECTOR
PROJETOR
ENGLISH .............
 -1 – 
 -96
FRANÇAIS ...........
 -1 – 
 -95
ESPAÑOL ............
 -1 – 
 -94
PORTUGUÊS ......
 -1 –
 -94
Printed on 100% post-consumer recycled paper.
Imprimé sur 100% de papier recyclé.
Impreso en 100% de papel reciclado de postconsumo.
Papel 100%...

Introduction
-1
Before using the projector, please read this operation manual carefully.
There are two important reasons for prompt warranty registration of your new SHARP Projector, using
the REGISTRATION CARD packed with the projector.
1. WARRANTY
This is to assure that you immediately receive the full benefit of the parts, service and labor
warranty applicable to your purchase.
2. CONSUMER PRODUCT SAFETY ACT
To ensure that you will promptly receive any safety notification of inspection, modification,...

-2
WARNING:
The cooling fan in this projector continues to run for about 90 seconds after the projector enters the standby mode.
During normal operation, when putting the projector into the standby mode always use the STANDBY button on the
projector or on the remote control. Ensure the cooling fan has stopped before disconnecting the power cord.
DURING NORMAL OPERATION, NEVER TURN THE PROJECTOR OFF BY DISCONNECTING THE POWER CORD.
FAILURE TO OBSERVE THIS WILL RESULT IN PREMATURE LAMP FAILURE.
Caution...

Introduction
-3
Contents
Introduction
Contents ............................................................... 3
IMPORTANT SAFEGUARDS ............................... 5
How to Access the PDF Operation Manuals of
SharpVision Manager .................................... 8
Quick Guide ......................................................... 9
Part Names ........................................................ 10
Projector (Front and Top View) ................................ 10
Projector (Rear View)...

-4
Easy to Use Functions
Selecting the Picture Display Mode ................ 62
Switchable High Brightness/High
Contrast Mode ............................................. 65
Digital Shift Function ........................................ 66
Subtitle Setting .................................................. 66
LED Off Function ............................................... 67
Displaying the Lamp Usage Time .................... 67
Setting On-screen Display ............................... 68
Selecting...

Introduction
-5 1. Read Instructions
All the safety and operating instructions should be read
before the product is operated.
2. Retain InstructionsThe safety and operating instructions should be
retained for future reference.
3. Heed WarningsAll warnings on the product and in the operating
instructions should be adhered to.
4. Follow InstructionsAll operating and use instructions should be followed.
5. CleaningUnplug this product from the wall outlet before cleaning.
Do not use liquid cleaners or...

-6 18. Damage Requiring Service
Unplug this product from the wall outlet and refer
servicing to qualified service personnel under the
following conditions:
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen
into the product.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally by
following the operating instructions. Adjust only
those controls that are covered by the operating
instructions, as an improper...

Introduction
-7
Be sure to read the following safeguards when setting up
your projector.
Caution concerning the lamp unit

Potential hazard of glass particles if
lamp ruptures. In case of lamp rupture,
contact your nearest Authorized
SharpVision Service Center or Dealer
for replacement.
See “Replacing the Lamp” on pages 80-82.
Cautions concerning the setup of the projector

For minimal servicing and to maintain high image qual-
ity, SHARP recommends that this projector be installed
in an area free from...

-8
PDF operation manuals in several languages for the “SharpVision Manager” theater projec-
tor software provided are included in the CD-ROM.  To utilize these manuals, you need Adobe
Acrobat Reader installed on your PC (Windows or Macintosh). If you have not installed Acro-
bat Reader yet, you can install it from the CD-ROM.
To install Acrobat Reader from the CD-ROM
For Windows:
1Insert the CD-ROM in the CD-ROM drive.
2Start up Explore.
3Double click the “CD-ROM” drive.
4Double click the “ACROBAT”...

Introduction
-9
In this page, connection of the projector and the video equipment is explained as an example
for the procedure from setup to projection. Refer to each page for details.
Quick Guide
Required equipments
Composite video cable
(commercially available)
Projector Remote control
• Insert the batteries.
(Page 13)Power cord
1. Place the projector facing a wall or a screen.
2. Connect to video equipment. (Page 17)6. Turn the projector on using  on the remote
control. (Page 34)
3. Connect the output...