Sharp Xv Z12000 Projector User Manual

-10
43
43
43
29
28
28
42
62
35
34
78
78
27
Adjustment buttons(", ', \, |)For selecting menu items.
ENTER buttonFor setting items selected 
or adjusted on the menu.
UNDO buttonFor undoing an operation or 
returning to the default 
settings.
Lens shift dial
Zoom knob
Focus ringMENU button
For displaying adjustment 
and setting screens.
RESIZE button
For switching the screen 
size (SIDE BAR, SMART 
STRETCH, etc.).
INPUT buttonFor switching input mode 
1, 2, 3, 4 or 5.
ON button
For turning the power...

Introduction
-11
3
2
1
1
PUSH!3
16
Remote control 
sensor13
18
Kensington Security 
Standard connector INPUT 2 terminals
Terminals for 
component and RGB 
signals
.
19INPUT 5 terminalTerminal for DVI 
digital, computer 
RGB and component 
signals.
18
INPUT 1 terminalsTerminals for 
component and 
RGB signals
.
17INPUT 3 terminalTerminal for 
connecting video 
equipment with an 
S-video terminal.
26WIRED REMOTE 
control input 
terminal
17INPUT 4 terminalFor connecting 
video equipment.
77Intake vent...

-12
Remote Control (Front View)
Part Names
38KEYSTONE buttonFor adjusting Keystone Correction 
or Vertical Size setting.
26WIRED R/C JACKFor controlling the projector by 
connecting the remote control to the 
projector.
34ON buttonFor turning the power on.
42MENU buttonFor displaying adjustment and 
setting screens.
43Adjustment buttons(", ', \, |)For selecting menu items.
43ENTER buttonFor setting items selected or 
adjusted on the menu.
43UNDO buttonFor undoing an operation or 
returning to the...

Introduction
-13
45˚30˚30˚
45˚
30˚
23(7 m)
Using the Remote Control

The remote control can be used to control the projector
within the ranges shown in the illustration.
Note
•The signal from the remote control can be reflected off a screen
for easy operation. However, the effective distance of the signal
may differ due to the screen material.
When using the remote control:
•Be sure not to drop, expose to moisture or high temperature.
•The remote control may malfunction under a fluorescent lamp.
Under...

-14
Accessories
Remote control
RRMCGA216WJSATwo “AA” size batteries
Power cord
CACCDA024DE01
3 RCA to 15-pin D-sub cable (910 (3.0 m)) AN-C3CP
DVI to 15-pin D-sub adaptor (7.9 (20 cm)) AN-A1DV
DVI cable (910 (3.0 m)) AN-C3DV
Note
•Some of the cables may not be available depending on the region. Please check with your nearest
Authorized SharpVision Service Center or Dealer.Operation manual (this manual)
TINS-A970WJZZ
SharpVision Manager operation manual
TINS-B097WJZZ
CD-ROM
(SharpVision Manager)...

Connections and Setup
Connections and Setup
XV_Z12000_E_US_p15_26.p6503.9.26, 6:36 PM 15 

-16
Connecting the Projector to Other Devices
Before Connecting
Note
•Before connecting, be sure to unplug the power cord of the projector from the AC outlet and turn off
the devices to be connected. After making all connections, turn on the projector and then the other
devices.
When connecting a computer, be sure that it is the last device to be turned on after all the connec-
tions are made.
•Be sure to read the operation manuals of the devices to be connected before making connections.
This projector...

Connections and Setup
-17
Connecting to Video Equipment
S-video cable (commercially available)
*Use when connecting to video
equipment with S-video output
terminal.Connecting to Video
Equipment Using an
S-video or a Composite
Video Cable (INPUT 3
or 4)
Using an S-video or a composite video cable,
a VCR, DVD player or other video equipment
can be connected to INPUT 3 or INPUT 4 input
terminal.
1Connect an S-video cable or a
composite video cable to the
projector.
•S-video cable: to INPUT 3 terminal...

Component cable
(commercially available)
DVD player or
DTV* decoder
Connecting to
Component Video
Equipment Using a
Component Cable
(INPUT 1 or 2)
Use a component cable when connecting the
component video equipment such as DVD play-
ers and DTV* decoders to INPUT 1 or 2 termi-
nals.
*DTV is the umbrella term used to describe the
new digital television system in the United States.
1Connect a component cable to
the projector.
2Connect the above cable to the
component video equipment.
Note
•When connecting...

Connections and Setup
-19
To analog RGB
output terminal 5 RCA RGB cable
(Commercially available)
DVD player or
DTV* decoder
Connecting to RGB Video
Equipment Using a 5 RCA
RGB Cable (INPUT 1 or 2)
Use a 5 RCA RGB cable when connecting the
RGB video equipment such as DVD players and
DTV* decoders to INPUT 1 or 2 terminals.
*
DTV is the umbrella term used to describe the
new digital television system in the United States.
1Connect a 5 RCA RGB cable to
the projector.
2Connect the above cable to the
RGB...