Sharp Xv Z12000 Projector User Manual

Auto Sync Display
Function
Used to set the screen displayed during Auto
Sync.
Select “Auto Sync Disp” in the “Fine
Sync” menu on the menu screen.
➝For operating the menu screen, see
pages 42 to 45.
Description
The image set as a back-
ground image is projected.
The computer image being
adjusted is displayed.
Selected Item
-60
Adjusting Computer Images
XV_Z12000_E_US_p42_60.p6503.9.24, 2:03 PM 60 

Easy to Use Functions
Easy to Use Functions
XV_Z12000_E_US_p61_65.p6503.9.24, 2:04 PM 61 

-62
Selecting the Picture Display Mode
Switching the Picture
Display Using Different
Input Signals
Press .
•Each time  is pressed, the display
changes as shown on pages 63 and 64.
Info
•In the Dot by Dot Mode, images are dis-
played in the original resolution, therefore
they will not be enlarged.
•To return to the standard image, press 
while “RESIZE” is displayed on the screen.
This function allows you to modify or customize the picture display mode to enhance the
input image. Depending on the input...

Easy to Use Functions
-63
VIDEO
• Select “DOT BY DOT” during 720P input when viewing 720P output from a computer.
• 720P switches between “STRETCH” and “DOT BY DOT”. “STRETCH” is fixed when 1080I signal is entered.
960 
 720 1280 
 720 480I
480P
576I
576P
NTSC
PAL
SECAM
960 
 720 1280 
 720 480P
–– 720P
––1280 
 720
1280 
 720 1280 
 720 SIDE BAR STRETCHCINEMA
ZOOM SMART
STRETCH
1280 
 720
–
–1280 
 720
1280 
 720–
– DOT BY DOT
1280 
 720
– 1080I For 4:3
 aspect ratio
For 16:9 
aspect ratio
480I
480P...

-64
COMPUTER
960 
 720 800 
 600  SVGA (800 
 600)NORMAL DOT BY DOT
For 4:3
 aspect ratio
For without 
4:3 aspect ratio960 
 720 1024 
 720 XGA (1024 
 768)
960 
 720 1280 
 720 SXGA (1280 
 960)
900 
 720 1280 
 720 SXGA (1280 
 1024)
VGA
SVGA
XGA
SXGA
Input Signal
NORMALOutput screen image
DOT BY DOT
4:3 aspect ratio
(640 
 480)
4:3 aspect ratio
(800 
 600)
4:3 aspect ratio 
(1024 
 768)
5:4 aspect ratio 
(1280 
 1024)
Selecting the Picture Display Mode
XV_Z12000_E_US_p61_65.p6503.9.24, 2:04 PM 64 

Easy to Use Functions
-65
Switching HIGH
BRIGHTNESS MODE/
HIGH CONTRAST MODE
Press  on the remote control to
select the desired mode.The mode
is switched in the order of “HIGH
BRIGHTNESS MODE”, “MEDIUM
MODE” and “HIGH CONTRAST
MODE”.
Switchable High Brightness/High Contrast Mode
This function controls the quantity of the projected light and the contrast of the image. It can
be operated using the IRIS button on the remote control.
Note
•The projector is set to the “HIGH BRIGHT-
NESS MODE” when shipped...

Digital Shift Function
For easier viewing, this function shifts the entire image projected on the screen up or down when
projecting 16:9 images from DVD players and DTV* decoders.
* DTV is the umbrella term used to describe the new digital television system in the United States.
Adjusting the Digital Shift
Select “Digi. Shift” in the “Options”
menu on the menu screen.
➝For operating the menu screen, see
pages 42 to 45.
Note
•The Digital Shift Function works with the
SMART STRETCH and CINEMA ZOOM
screen....

Easy to Use Functions
-67
Confirming the Lamp
Usage Time
This function allows you to check the lamp
usage time.
Select “Options” menu to see the lamp
usage time.
Note
•It is recommended that the lamp be
changed after approximately 1,900 cumu-
lative hours of use.
Displaying the Lamp Usage Time
Lamp Usage Time
LED Off Function
LEDs (indicators) on the projector can be turned off when they are disturbing the projection.
Turning LED off
Select “LED” in the “Options” menu on
the menu screen.
➝For operating...

This function allows you to turn on or off the on-screen messages. When setting “ Level A”
or “
 Level B” in “OSD Display”, the input mode display (e.g. INPUT 1) will not appear, even
if the INPUT button is pressed.
Setting On-screen Display
Selected Item
 Normal
 Level A
 Level B
Description
All On-screen Displays are displayed.
Input and Auto Sync are not displayed.
All On-screen Displays are not displayed.
(except for Menu, On-screen Displays displayed when the KEYSTONE button is pressed,
and warning...

Easy to Use Functions
-69
For INPUT 5
Set when RGB signals are
received from video equip-
ment.
Set when analog component
signals are received from
video equipment.
 RGB
 Component
Set when digital PC RGB
signals are received from
the computer.
Set when digital PC com-
ponent signals are re-
ceived from the com-
puter.
Set when digital video
RGB signals are re-
ceived from video equip-
ment.
Set when digital video
component signals are
received from video
equipment.
Set when analog RGB
signals are...