Sharp Ux355l Plain Paper Fax Machine Operation Manual

Distinctive Ring
99
8. Special 
FunctionsDistinctive Ring (Requires Subscription to 
Service)
Important:
♦To use distinctive ring, you must subscribe to a distinctive ring 
service from your local phone company.
♦Your fax machine may not be compatible with some distinctive ring 
services.
Distinctive ring is a service offered by some local telephone 
companies whereby they assign an additional second number to your 
regular single line. The second number rings differently from your 
normal number.
If you...

Distinctive Ring
100
3Press a number from 1 to 3 to select 
the ring pattern below that matches 
your second number’s ring pattern. 
Or, press 4 to have your fax 
automatically answer your normal 
telephone number. Press 5 to turn off 
the distinctive ring function.
RING PATTERN 1 Two short rings
RING PATTERN 2 One short, one long, and one 
short ring
RING PATTERN 3 Two short rings and one long ring
STANDARD RING Your standard (normal) ring 
pattern
OFF SETTING Turn distinctive ring off
4Press the STOP...

Broadcasting
101
8. Special 
FunctionsBroadcasting
This function allows you to send the same document to as many as 20 
different locations with just one operation. First store the document in 
memory, then enter the numbers of the receiving machines. The 
document will be transmitted to each location.
♦You can only use Rapid Keys or Speed Dial numbers to dial the 
numbers of the receiving machines.
1Load the document(s).
The display will show:
2Press the START/MEMORY key 
and then 2.
3Dial the receiving...

Broadcasting
102
5Press the START/MEMORY key. 
Transmission will begin.
•A Transaction Report is 
automatically printed out after 
Broadcasting is completed. Check 
the Note column of the report to 
see if any of the locations are 
marked Busy or have a 
communication error code. If so, 
send the document to those 
locations again.
START/MEMORY
all.book  Page 102  Wednesday, April 26, 2000  7:08 PM 

Cover Sheet
103
8. Special 
FunctionsCover Sheet
You can have the fax generate a cover sheet and send it as the last 
page of each of your fax transmissions.
Follow the steps below to turn on the cover sheet function. Once the 
cover sheet function is turned on, cover sheets will be included with 
all tranmissions until you turn it off.
1Press these keys:
The display will show:
You can select 
a message.
For the recipients 
name to appear, you 
must dial using a 
Speed Dial or Rapid 
Key number with the...

Cover Sheet
104
3Press 1 (YES) to turn on the cover 
sheet function, or 2 (NO) to turn it 
off.
The display will show:
4Press the STOP key to return to the 
date and time display.
AUTO  PRIN T O U T
or YES NO12
STOP
Selecting a header message (optional)
When the cover sheet function is turned on, you can also select a 
message which will appear as a header at the top of the cover sheet. 
Note that the message selection is only effective for one transmission.
1Load the document(s).
•The document must be...

Cover Sheet
105
8. Special 
Functions
3Select a message by entering a 
number from 1 to 4:
1: URGENT
2: IMPORTANT
3: CONFIDENTIAL
4: PLS. DISTRIBUTE
1
(Example)
4Dial the receiving machine and 
transmit the document.
Note:
To cancel a cover sheet header setting, press the STOP key or remove the 
document from the feeder.
all.book  Page 105  Wednesday, April 26, 2000  7:08 PM 

Batch Page Numbering
106
Batch Page Numbering
You can change the page numbering of the transmitted document from 
simple numbering (P.01, P.02, etc.) to batch numbering, which 
means that a slash and the total number of pages being sent are added 
after each page number (for example, P. 01/05, P.02/05, etc.). This 
allows the receiver to check for missing pages.
1Load the document(s).
•The document must be loaded 
before batch page numbering can 
be set.
2Press these keys:
The display will show:
3Enter...

Batch Page Numbering
107
8. Special 
FunctionsComments:
♦If you need to cancel a batch number entry, remove the document 
from the feeder or press the STOP key.
♦If the number of pages actually transmitted does not coincide with 
the batch number entered, the alarm will sound and PAGE COUNT 
ERROR will appear in the display. PAGE E. will also appear in the 
NOTE column of the Transaction Report if it has been set to print 
out.
all.book  Page 107  Wednesday, April 26, 2000  7:08 PM 

Blocking Reception of Unwanted Faxes
108
Blocking Reception of Unwanted Faxes
The Anti Junk Fax function allows you to block reception of faxes 
from parties which you specify. This saves paper by not printing out 
unwanted junk faxes.
To use this function, follow the steps below to turn it on, and then 
enter the fax numbers from which you do not want to receive faxes as 
indicated in the procedure that follows.
1Press these keys:
The display will show:
JUNK # CHECK
Entering Anti Junk numbers
Enter (or...