Sharp MX M350N User Manual
Have a look at the manual Sharp MX M350N User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 615 Sharp manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 96
KEY OPERATOR PROGRAMS
8-6
Pause time setting
This setting is used to select the duration of pauses
that are inserted in destination fax numbers.
Normally the setting is 2 seconds, which means
that each time the [PAUSE] key is touched when
dialing or storing a fax number, a pause of 2
seconds is inserted.
The pause time can be set to any number of
seconds from 1 to 15.
Speaker volume settings
This program is used to adjust the volume of the
five following sounds that are emitted from the
speaker:...](http://img.usermanuals.tech/thumb/68/37902/w64_Sharp_MX-M350N-95.png "Page 96
KEY OPERATOR PROGRAMS
8-6
Pause time setting
This setting is used to select the duration of pauses
that are inserted in destination fax numbers.
Normally the setting is 2 seconds, which means
that each time the [PAUSE] key is touched when
dialing or storing a fax number, a pause of 2
seconds is inserted.
The pause time can be set to any number of
seconds from 1 to 15.
Speaker volume settings
This program is used to adjust the volume of the
five following sounds that are emitted from the
speaker:...")
![Page 100
KEY OPERATOR PROGRAMS
8-10
Anti junk fax setting
This program is used to enter fax numbers from
which you wish to block fax reception. Up to 50
(maximum of 30 on the AR-M351N/AR-M451N/
AR-M351U/AR-M451U) numbers can be entered.
This program is normally disabled.
To block reception from the entered fax numbers,
touch the [VALID] key.
1Touch the [ENTER] key.
The passcode entry screen appears.
2Enter the fax number with the numeric
keys.
Up to 20 digits can be entered.
When you have finished entering the...](http://img.usermanuals.tech/thumb/68/37902/w64_Sharp_MX-M350N-99.png "Page 100
KEY OPERATOR PROGRAMS
8-10
Anti junk fax setting
This program is used to enter fax numbers from
which you wish to block fax reception. Up to 50
(maximum of 30 on the AR-M351N/AR-M451N/
AR-M351U/AR-M451U) numbers can be entered.
This program is normally disabled.
To block reception from the entered fax numbers,
touch the [VALID] key.
1Touch the [ENTER] key.
The passcode entry screen appears.
2Enter the fax number with the numeric
keys.
Up to 20 digits can be entered.
When you have finished entering the...")
![Page 101
KEY OPERATOR PROGRAMS
8-11
8
3Press the numeric keys to store the fax
number.
Up to 20 digits can be entered.
To enter a +, press the key.
To enter a hyphen, touch the [PAUSE] key. To
enter a space, touch the [SPACE] key.
If you make a mistake, press the [C] key and
re-enter the correct digit.
4Touch the [OK] key.
You will return to the screen of step 2 and the
stored fax number will appear. To store another
number, repeat steps 2 through 4.
1Touch the [DELETE] key.
The passcode delete screen appears....](http://img.usermanuals.tech/thumb/68/37902/w64_Sharp_MX-M350N-100.png "Page 101
KEY OPERATOR PROGRAMS
8-11
8
3Press the numeric keys to store the fax
number.
Up to 20 digits can be entered.
To enter a +, press the key.
To enter a hyphen, touch the [PAUSE] key. To
enter a space, touch the [SPACE] key.
If you make a mistake, press the [C] key and
re-enter the correct digit.
4Touch the [OK] key.
You will return to the screen of step 2 and the
stored fax number will appear. To store another
number, repeat steps 2 through 4.
1Touch the [DELETE] key.
The passcode delete screen appears....")
KEY OPERATOR PROGRAMS 8-11 8 3Press the numeric keys to store the fax number. Up to 20 digits can be entered. To enter a +, press the key. To enter a hyphen, touch the [PAUSE] key. To enter a space, touch the [SPACE] key. If you make a mistake, press the [C] key and re-enter the correct digit. 4Touch the [OK] key. You will return to the screen of step 2 and the stored fax number will appear. To store another number, repeat steps 2 through 4. 1Touch the [DELETE] key. The passcode delete screen appears. 2Touch the key of the number you wish to delete. Touch the [YES] key in the message that appears to delete the number. If you touch the [NO] key, you will return to the passcode delete screen without deleting the number. PRINTING OUT SETTINGS Settings established with the key operator programs can be verified by printing them out. 1Press the [CUSTOM SETTINGS] key. 2Touch the [KEY OPERATOR PROGRAMS] key. 3Use the numeric keys to enter the five-digit key operator code number. For the factory default setting for the key operator code number, see page 2 of the key operators guide. 4Touch the [LIST PRINT] key. 5Touch the [KEY OPERATOR PROGRAMS LIST] key. 6Touch the [IMAGE SEND] key. KEY OPERATOR PROGRAMS LIST PROCESSING PRINT DATA. appears in the message screen and printing begins. To cancel printing, touch the [CANCEL] key. Deleting a passcode KEY OPERATOR PROGRAMS SENDER CONTROL LIST PRINT FAX DATA RECEIVE/FORWADEFAULT SETTINGS KEY OPERATOR CODE NOTES O The list is printed before other jobs waiting to be printed. OIn the screen of step 5, you can touch the [IMAGE SENDING ACTIVITY REPORT (FAX)] key to print an activity report (transmissions and receptions). Print this list when you wish to check the activity record. (see Activity report print select setting on page 8-6) PRINTER SETTINGS KEY OPERATOR CODE CHANGE CONTROL LIST PRINT NETWORK SETTINGS ANTI JUNK FAX NUMBER LIST IMAGE SENDING ACTIVITY REPORT (FAX) KEY OPERATOR PROGRAMS LIST TDOCUMEN ALL KEY OPERATOR PROGRAM IMAGE SEND Downloaded From ManualsPrinter.com Manuals
9-1 CHAPTER 9 APPENDIX This chapter contains reference information regarding the fax features of the machine. Page SPECIFICATIONS .................................................................................. 9-2 INDEX ..................................................................................................... 9-3 Downloaded From ManualsPrinter.com Manuals
9-2 SPECIFICATIONS For information on power requirements, power consumption, dimensions, weight, and other specifications that are common to all features of the machine, refer to page 8-2 of Operation manual (for general information and copier operation). *1 Transmission speed is for an A4 or 8-1/2x11 document with approximately 700 characters at standard resolution (8x3.85 lines/mm) sent in high speed mode (33.6 kbps (JBIG) or 14.4 kbps (MMR)). This is only the time required to transmit the image information; the time required to send protocol signals is not included. Actual transmission times will vary depending on the contents of the document, the receiving machine type, and telephone line conditions. *2 Image memory can be expanded by installing the optional fax expansion memory (AR-MM9). Applicable telephone line Public switched telephone network Compression method MH, MR, MMR, JBIG Transmission modes Super G3, G3 (the machine can only send faxes to and receive faxes from machines that support G3 or Super G3) Scanning method CCD flatbed scanning Scanning resolution (Supports ITU-T standards)8 x 3.85 lines/mm (Standard) 8 x 7.7 lines/mm (Fine, Fine-Halftone) 8 x 15.4 lines/mm (Super Fine, Super Fine - Halftone) 16 x 15.4 lines/mm (Ultra Fine, Ultra Fine - Halftone) Printing method Electrophotographic system (laser) Transmission speed 33.6 kbps 2.4 kbps Automatic fallback Transmission time * 12 seconds (Super G3 mode / 33.6 kbps, JBIG), 6 seconds (G3 ECM mode / 14.4 kbps, MMR) Paper sizes A3, B4, A4, B5, A5, 11x17 to 5-1/2x8-1/2 Effective print width 293 mm max. (A3 printing) or 11.5 max. (11x17 printing) Input document size A3 to A5 or 11x17 to 5-1/2x8-1/2 (A5 or 5-1/2x8-1/2: Vertically-oriented feeding); Maximum length: 800 mm or 31-1/2 (using Automatic document feeder) Refer to Image rotation page 2-8 for transmission of A5 (5-1/2x8-1/2) size documents. Effective scanning width 297 mm (11.7) maximum Halftone transmission Yes (256 levels) Contrast adjustment Automatic (5 levels by manual adjustment) Extension telephone connectionPossible (1 telephone) Auto dialing Combined total of 999 (maximum of 500 on the AR-M351U/AR-M451U) one- touch and group keys, redialing (automatic) Timer transmission Yes Program function Yes (8 programs) F-code support Yes (can transmit and receive SUB/SEP (sub-address) and SID/PWD (passcode) signals) Image memory 2 MB * 2 Error Correction Mode (ECM) Yes Some discrepancies may exist in the illustrations and content due to improvements to the machine. Downloaded From ManualsPrinter.com Manuals
9-3 9 INDEX QNumerics 2in1 ........................................................................ 3-7 QA Activity report print select setting ........................... 8-6 Address book .................................................. 1-4, 2-4 Address book screen ............................................. 1-5 Address review................................................ 1-4, 3-3 Alarm ...................................................................... 7-3 Anti junk fax setting .............................................. 8-10 Auto receive reduce setting.................................... 8-9 Auto reduction sending setting ............................... 8-7 Auto wake up print ................................................. 8-5 Auto-dialing ................................................... 1-12, 2-4 Automatic reduction ............................................... 1-6 QB Broadcast transmission ................................ 3-2 to 3-3 QC Call timer at memory sending ................................ 8-8 Cancelling -F-code polling .................................................... 4-5 -Polling .............................................................. 3-14 -Scanning a document into memory (Public Box) for polling memory ........................................... 3-15 -Transfer............................................................ 3-15 -Transmission...................................................... 2-9 Card shot...................................................... 3-8 to 3-9 Condition settings screen -Address book screen ......................................... 1-5 -Condition settings screen................................... 1-4 Condition settings................................................... 1-5 Connecting an extension phone............................. 1-2 Contents ....................................................... 0-2 to 0-3 QD date and time ......................................................... 1-2 Date/own number print position setting .................. 8-8 Default display settings .......................................... 8-4 Default exposure settings....................................... 8-5 Deleting a passcode............................................. 8-11 Deleting document data -F-code polling memory box................................ 4-5 -Public Box ........................................................ 3-16 Display switching.................................................... 1-5 Distinctive ring detection ........................................ 8-7 Document glass ..................................................... 1-7 Dual page scan ...................................................... 3-5 Duplex reception setting......................................... 8-9 QE ECM ....................................................................... 8-7 Edge erase ............................................................. 3-4 Editing and deleting -F-code memory box ........................................ 6-13 -Group index ....................................................... 6-9 -Group keys......................................................... 6-7 -One-touch keys .................................................. 6-5 -Original size ....................................................... 1-9 -Programs ........................................................... 6-8 Enlargement/reduction transmission ...................... 2-6 Explanation of key operator programs ................... 8-4 QF Fax default settings ................................................ 8-5 Fax mode ........................................................ 1-4, 2-2 Fax output tray setting ............................................ 8-9 Fax own number and name set .............................. 8-5 Fax polling security .............................................. 8-10 Fax power switch ............................................ 0-4, 1-2 Fax receive settings ............................................... 8-9 Fax send settings ................................................... 8-7 Faxing a two-sided original .................................... 2-7 F-code confidential transmission ............................ 4-6 F-code polling ......................................................... 4-5 F-code polling memory ........................................... 4-4 F-code relay broadcast function ............................. 4-9 F-code relay broadcast transmission ..................... 4-8 F-code relay request function ................................ 4-9 F-code transmission ............................................... 4-2 File .................................................................. 1-4, 2-2 Forwarding function .............................................. 3-18 QG Group dialing ....................................... 1-12, 6-6 to 6-7 QI If received data cannot be printed ........................ 2-10 Image memory ....................................................... 9-2 Image rotation ........................................................ 2-8 Index ............................................................... 1-5, 6-9 Initial resolution setting ........................................... 8-4 QJ Job build mode ..................................................... 3-10 QK Key operator programs .......................................... 8-2 QL Line connection ...................................................... 0-4 Lithium battery ........................................................ 0-4 Loading a document ............................................... 1-7 QM memory box ........................................................... 4-2 Mode switch .................................................... 1-4, 2-2 Must input next address key at broadcast setting .. 8-4 Downloaded From ManualsPrinter.com Manuals
INDEX 9-4 QN Number of calls in auto reception........................... 8-9 QO One-touch dialing .......................................... 1-12, 2-4 One-touch key display............................................ 1-5 One-touch keys ............................................... 6-3, 6-5 On-hook dialing .................................................... 1-12 Operation panel...................................................... 1-3 Original print on transaction report ......................... 8-6 Original sizes.......................................................... 1-6 Own number sending ........................................... 3-11 QP Passcode ..................................................... 4-2 to 4-3 Passcode number setting..................................... 8-10 Pause ..................................................................... 2-3 Pause time setting.................................................. 8-6 PC-fax function..................................................... 3-19 Polling function ......................................... 3-13 to 3-16 -F-code polling .................................................... 4-5 -F-code polling memory ...................................... 4-4 -Manual polling .................................................. 3-14 -Polling memory ....................................... 3-13, 3-15 Polling security ..................................................... 3-16 Polling security setting ......................................... 8-10 Polling times ......................................................... 6-11 Print -Communication activity report............................ 7-3 -F-code confidential memory box ........................ 4-7 -F-code polling memory box................................ 4-5 -Key operator program ...................................... 8-11 -Programmed information ................................. 6-14 -Public box ........................................................ 3-16 -Transaction report .............................................. 7-2 Print PIN ............................................................... 6-12 Print style setting .................................................... 8-9 Printing page number at receiver ........................... 8-7 Priority transmission ............................................... 2-9 Problems and solutions .......................................... 7-4 Program ........................................................ 3-17, 6-8 Programming/storing -F-code confidential transmission memory box .6-10, 6-12 -F-code polling memory box..................... 6-10, 6-11 -F-code relay broadcast memory box ...... 6-10, 6-13 -Group index ....................................................... 6-9 -Group key .......................................................... 6-6 -One-touch dial key ................................... 6-3 to 6-4 -Original sizes ..................................................... 1-9 -Program ............................................................. 6-8 -Programming frequently used operations ........ 3-17 Public box.......................................... 3-15 to 3-16, 4-2 QQ Quick file ......................................................... 1-4, 2-2 Quick on-line .......................................................... 2-8 Quick on line sending ............................................. 8-8 QR Read-end ............................................................... 2-3 Recall in case of communication error ................... 8-8 Recall in case of line busy ...................................... 8-8 Receiving party is busy .......................................... 2-8 Reception -Automatic reception ......................................... 2-10 -Manual reception ........................................ 5-2, 5-3 -Remote reception............................................... 5-3 Recipient .............................................................. 6-13 Redialing .............................................................. 1-12 Relay machine ............................................. 4-8 to 4-9 Relay request machine ................................ 4-8 to 4-9 Remote reception ................................................... 5-3 Remote reception number setting .......................... 8-6 Resend ................................................................... 1-4 Rotation sending setting ......................................... 8-7 QS Scan complete sound setting ................................. 8-5 Selecting the exposure ......................................... 1-11 Selecting the resolution ........................................ 1-10 Senders name ....................................................... 1-2 Senders number .................................................... 1-2 Sending .................................................................. 2-2 -2in1 .................................................................... 3-7 -Auto-dialing ........................................................ 2-4 -Broadcast transmission...................................... 3-2 -Cancelling .......................................................... 2-9 -Card shot ................................................. 3-8 to 3-9 -Dual page scan .................................................. 3-5 -Edge erase......................................................... 3-4 -Enlargement/reduction transmission .................. 2-6 -F-code transmission........................................... 4-3 -Image rotation .................................................... 2-8 -Job build mode................................................. 3-10 -Manual transmission .......................................... 5-4 -Own number sending ....................................... 3-11 -PC-fax .............................................................. 3-19 -Priority transmission........................................... 2-9 -Quick On-line ..................................................... 2-8 -Speed dialing ..................................................... 2-4 -Storing transmission jobs (memory transmission).... 2-8 -Timer .................................................................. 3-6 -Two-sided original .............................................. 2-7 Set the telephone number for data forwarding ....... 8-9 Size of a loaded original ............................... 1-8 to 1-9 Speaker volume settings ........................................ 8-6 Speaker .................................................................. 1-4 Downloaded From ManualsPrinter.com Manuals
INDEX 9-5 9 Special modes........................................................ 1-4 -2in1 .................................................................... 3-7 -Card shot ................................................. 3-8 to 3-9 -Dual page scan .................................................. 3-5 -Edge erase......................................................... 3-4 -Job build mode................................................. 3-10 -Memory box ......................................... 3-15 to 3-16 -Own number sending ....................................... 3-11 -Polling .............................................................. 3-14 -Program ........................................................... 3-17 -Timer transmission............................................. 3-6 Transaction report ................................................ 3-12 Specifications ......................................................... 9-2 Speed dial .............................................................. 1-4 Speed dialing ................................................ 1-12, 2-4 Storing transmission jobs ....................................... 2-8 Sub address ........................................................... 1-5 Sub-address ................................................. 4-2 to 4-3 QT The number of direct address/sender keys displayed setting .................................................... 8-4 The number of file name/subject keys displayed setting .................................................... 8-4 Timer transmission ................................................. 3-6 Touch panel ........................................................... 1-3 Transaction report .................................................. 7-2 Transaction report print select setting .................... 8-6 Transmission error ................................................. 2-8 TYPE/NOTE column .............................................. 7-2 QU Using an extension phone...................................... 5-2 QV Viewing the communication activity report ............. 7-3 QW Warning message .................................................. 7-3 Downloaded From ManualsPrinter.com Manuals
SHARP ELECTRONICS (Europe) GmbH Sonninstraße 3, D-20097 Hamburg Downloaded From ManualsPrinter.com Manuals
PRINTED IN FRANCE TINSE2787GHZ2 AR-FX12 MX-M350U/MX-M450U/MX-M350N/MX-M450N Downloaded From ManualsPrinter.com Manuals