Sharp MX M350N User Manual

FACSIMILE EXPANSION KIT
OPERATION MANUAL
MODEL
AR-FX12
 BEFORE USING 
  THE FAX FEATURE
 BASIC OPERATIONS
 
USING CONVENIENT  
 FUNCTIONS 1
 
USING CONVENIENT  
 FUNCTIONS 2
 
USING CONVENIENT  
 FUNCTIONS 3
 PROGRAMMING
 TROUBLESHOOTING
 KEY OPERATOR 
 PROGRAMS
 APPENDIX1-1
2-1
3-1
4-1
5-1
6-1
7-1
8-1
9-1
Page
Be sure to become thoroughly familiar with this manual to gain 
the maximum benefit from the product.
Before installing this product, be sure to read the installation 
requirements and...

■FAX interface cable and Line cable:
These special accessories must be used with the device.
■Notice for Users in Europe
This equipment works on on the British analogue public switched telephone network.
This equipment has been tested according to the pan-European TBR 21 regulation.
It will operate on all analogue telephone networks which comply with the TBR 21.
Please contact your dealer or network operator, if you are not sure whether your network operates according to TBR 21.
■Important Notice for New...

Thank you for purchasing an AR-FX12 Facsimile Expansion Kit. The Operation manual (for facsimile) that is
included in the kit explains the procedures for using the fa x function on AR-models, and thus some sections do not
apply to the MX-M350U/M450U/M350N/M450N. This guide ex plains those sections, and should be used together
with the Operation manual (for facsimile).
1. OPERATION PANEL
The operation panel of the MX-M350U/M450U/M350N/M450N is different from the panel described in the Operation
manual...

[SYSTEM SETTINGS] Key
The [SYSTEM SETTINGS] key on the operation panel is called the [CUSTOM SETTI NGS] key in the Operation
manual (for facsimile). When configur ing system settings, refer to the illustra tion below. At other places in the
Operation manual that refer to the Custom Settings, substitute System Settings.
* With respect to the administrator settings, see the following.
2. ADMINISTRATOR SETTINGS
The Administrator Settings in the system settings are referred to as Key Operator Programs in the...

3. INBOUND ROUTING SETTINGS
Received faxes can be automatically forwarded to an e-mail address. This function can be used to forward received
faxes directly to an e-mail address without printing the faxes.
Configuring Inbound Routing Settings
Inbound routing settings are configured in the Web pages. For the procedure for accessing the Web pages, see
ACCESSING WEB PAGES in the Operation manual (for image send). After configuring the settings, be sure to click
[Submit] to save them.
■ Enabling inbound...

■Storing a forwarding table
Specify a sender and a forwarding destination to create a table (list) that combines the sender and the
forwarding address to which faxes from  that sender are sent. The table will be  added to the list of tables in the
Inbound Routing Settings screen. Up to 50 tables can be stored.
7Click Inbound Routing Settings in the
menu frame.
The Inbound Routing Settings screen appears.
8Click [Add].
The Table Registration screen appears.
9Enter a table.
● Table Registration
Ta b l e  N...

■Activate the table
Activate the stored table to use it for forwarding.
11Click Inbound Routing Settings in the
menu frame.
The Inbound Routing Settings screen appears.
12Select the [Forward Activated] checkbox of
the table that you wish to activate.
To delete a table, select the checkbox of the table
and click [Delete].
13Click [Submit].
■ Configuring advanced inbound
routing settings
Advanced inbound routing settings can be
configured for such purposes as prohibiting the
storing of tables and...

4. OTHER CHANGES
When using the fax function on the MX-M350U/M450U/M350N/M450N, make the following substitutions in the
Operation manual (for facsimile).
PageChangesLocation in Operation Manual  (for facsimile) When using the MX-M350U/M450U/
M350N/M450N
0-1 INTRODUCTION Operation manual (for network scanner) Operation manual  (for image send)
1-4   in the Condition
settings screen
Use this key when the network scanner
option is installed to switch between the E-
MAIL/FTP and INTERNET FAX screensUse this...

0-1
INTRODUCTION
Thank you for purchasing this product. This manual only explains the facsimile functions of the product. For safety
precautions and general information on using the machine such as loading paper, clearing misfeeds, and handling
peripheral units, see the Operation manual (for general information and copier operation). For other functions, see
the following manuals as appropriate:
Copier function: See Operation manual (for general information and copier operation).
General and...

0-2
CONTENTS
Page
INTRODUCTION ........................................................ 0-1
TO USE THIS PRODUCT CORRECTLY AS A
FACSIMILE ................................................................. 0-4
OIMPORTANT SAFETY INFORMATION .................. 0-5
ONOTICE FOR USERS IN AUSTRALIA AND NEW 
ZEALAND ................................................................ 0-5
CHAPTER 1
BEFORE USING THE FAX FEATURE
POINTS TO CHECK AND PROGRAM AFTER
INSTALLATION...