Sharp Ar153e N Manual

							39
7
250-SHEET PAPER FEED UNIT (AR-D16)
The paper feed unit provide the convenience of increased paper capacity for the unit 
and a greater choice of paper size readily available for copying.
The procedures for loading paper in the 
paper tray of paper feed unit, changing 
the paper size, and selecting the paper 
tray are same as for the paper tray in the 
unit. See LOADING THE PAPER TRAY 
(p.8) and SELECTING THE TRAY 
(p.19).
Using the paper feed unit with the printer function 
(when the AR-PG2 is installed)
When the printer/scanner expansion kit is installed on the unit, the AR-D16 can also 
be used with the printer function. To use the AR-D16 with the printer function, follow 
these steps to adjust the settings in the printer driver.
1Click the start button.
2Click Control Panel, select Printer and Other Hardware, and 
then click Printer and Faxes.
On Windows 95/98/Me/NT 4.0/2000, select Setting and click Printers.
3Click the SHARP AR-153E printer driver icon and from the 
File menu select Properties.
On Windows 95/98/Me, click the SHARP AR-153E printer driver icon,
select Properties from the File menu, and then click the Setup tab.
4Click the Utility tab.
5Select Two trays for Input tray 
option, and click OK.
The printer driver closes. This completes the 
settings needed to use the AR-D16.
The printer driver cannot be set for use with the AR-D16 when opened 
from the application.
Lower side cover
Tr a y 
						

							40
The procedure for installing the software for the optional AR-PG2 Printer/Scanner
Expansion Kit and the operation of the printer/scanner is explained here. Information
on how to use the online manual is also provided.
Illustrations of driver screens and other computer screens show the screens that 
appear in Windows XP Home Edition. Some of the names that appear in these 
illustrations may differ slightly from the screens that appear in other operating 
systems.
The following term is used in this chapter.
CD-ROM
Means the supplied CD-ROM with the SHARP Personal MFP series software.
SOFTWARE FOR THE SHARP PERSONAL MFP 
SERIES
The supplied CD-ROM includes software for this unit.
MFP driver
Scanner driver
Permits you to operate scanning function of this unit with TWAIN-compliant and 
WIA-compliant application.
Printer driver
Enables you to use the printer function of this unit with your computer.
Print Status Window
The print state and information on current printing are displayed on the status 
monitor window. 
Sharpdesk
An integrated software environment that makes it easy to manage document and 
image files and launch applications.
Button Manager
Button Manager enabling the SCANNER ( ) key located on the unit.
The scanning feature is only available with Windows 98/Me/2000/XP 
using a USB connection. For users running Windows 95/NT 4.0 or using 
a parallel connection, only printing is available.
8INSTALLING THE SOFTWARE 
						

							41
8
HARDWARE AND SOFTWARE REQUIREMENTS
Check the following hardware and software requirements in order to install the software.
*1Compatible with Windows 98, Windows Me, Windows 2000 Professional, Windows XP 
Professional or Windows XP Home Edition preinstalled model with USB interface 
equipped as standard.
*
2Printing is unavailable in MS-DOS mode.
*3The administrators authorization is required to install this software using this installer.
BEFORE INSTALLATION
The following table shows the drivers and software that can be installed for each 
version of Windows and interface connection method.
*1When the unit is connected through the parallel port, the Print Status Window can only 
be used when the parallel port is set to ECP mode. To set the parallel port mode, refer 
to your computer manual or ask the manufacturer of your computer.
*
2Sharpdesk can be installed when using a parallel interface connection, however, the 
unit’s scanner function cannot be used.
Computer type IBM PC/AT or compatible computer equipped with a 
USB1.1*1 or bi-directional parallel interface (IEEE 1284)
Operating system*2Windows 95, Windows 98, Windows Me, Windows NT 
Workstation 4.0 (ServicePack 5 or later)*3, Windows 2000 
Professional*3, Windows XP Professional*3, Windows XP 
Home Edition*3 
Display 800 x 600dots (SVGA) display with 256 colors (or better)
Hard disk free space150MB or more
Other requirement
for hardwareAn environment on which any of the operating systems listed 
above can fully operate
MFP Driver
Button 
ManagerSharpdeskPrinter driver/ 
Print Status 
WindowScanner driver
Users of Windows 
98/Me/2000/XP who 
will use the USB 
interface connection
Available*
1
Available Available Available
Users of Windows 
98/Me/2000/XP who 
will use the parallel 
interface connectionNot AvailableNot 
AvailableAvailable*
2
Windows 95/NT 4.0 
users
Is there another GDI printer driver or a Windows Printing System printer 
driver already installed? If installed, change the printer port setting. For 
the change of the printer port setting, see USING OTHER INSTALLED 
DRIVERS (p.66). 
						

							42
Flow of installation
Refer to the following table and then begin installation.
Operating
systemInterface Reference pages for how to install
Windows XPUSB/
ParallelInstalling onto Windows XP (USB/parallel interface) 
(p.43)
Windows 98USB
Installing onto Windows 98/Me/2000 (USB interface) (p.47)
ParallelInstalling onto Windows 95/98/Me/NT4.0/2000 
(Parallel interface) (p.50)
Windows MeUSB
Installing onto Windows 98/Me/2000 (USB interface) (p.47)
ParallelInstalling onto Windows 95/98/Me/NT4.0/2000 
(Parallel interface) (p.50)
Windows 2000USB
Installing onto Windows 98/Me/2000 (USB interface) (p.47)
ParallelInstalling onto Windows 95/98/Me/NT4.0/2000 
(Parallel interface) (p.50)
Windows 95/
NT 4.0ParallelInstalling onto Windows 95/98/Me/NT4.0/2000 
(Parallel interface) (p.50) 
						

							43
8
INSTALLING THE SOFTWARE
The following term is used in this section.
MFP 
Means the unit as a printer and scanner.
Installing onto Windows XP (USB/parallel interface)
Before starting the installation, make sure the USB or parallel interface cable is not 
connected to the MFP.
1Insert the supplied CD-ROM into your CD-ROM drive.
2Click the start button, click My Computer ( ), and then 
double-click the CD-ROM ( ) icon. 
3Double-click the setup ( ) icon.
4Select the software packages to be 
installed, and then click the Next 
button.
The software packages with checkmark ( ) 
on the list on the screen will be installed.
Click the Display README button to show 
the information on the selected package. 
For this description, it is assumed that the mouse is configured for 
right hand operation.
To print or scan, the MFP must be in the online state.
The scanner feature only works when using a USB interface cable.
If any error message appears, solve the problem following the 
instructions on the screen. After your problem is solved, the installing 
procedure will be continued. Depending on your problem, you may 
have to exit the installer. In this case, click the Cancel button to exit 
the installer. After solving your problem, reinstall the software from the 
beginning.
When any of Found New Hardware Wizard messages appear during 
the software installation, be sure to click the Cancel button.
If the language selection screen appears after you double click the 
setup icon, select the language you wish to use and click the Next 
button. (Normally, the correct language is selected automatically.) 
						

							44
5Review the software packages to be 
installed on the screen, and then click 
the Start button.
The software packages to be installed will be 
displayed on the screen. If inappropriate 
packages are displayed, click the Back button 
to select appropriate packages again.
6Copying files for MFP driver installation (This step will start if it 
was selected in step 4).
1After confirming the message in the Welcome window, click the 
Next button.
2A dialog box appears asking you to verify that the USB or parallel 
interface cable is not connected to the MFP. Make sure that the 
interface cable is not connected and click the Next button.
3Click the Next button in the dialog box to 
install the MFP driver or Cancel to quit the 
installation.
The setup program will start to copy the files.
If the following screen appears while the files are 
being copied (the message may appear more 
than once), click Continue Anyway. 
4When the The MFP driver installation is complete. dialog box 
appears, click the OK button.
The Button Manager installer will start.
If you are using the parallel interface connection, do not select the 
Button Manager checkbox because this feature is not supported with 
the parallel interface.
If the following screen appears, click the OK button. Review the 
contents in BEFORE INSTALLATION (p.41), and then select only  
appropriate the software packages to be installed. 
						

							45
8
7Begin installation of the Button Manager (This step will start if it 
was selected in step 4).
1After confirming the message in the Welcome window, click the 
Next button.
2Read the message in the Please read the following information. 
window, and then click the Next button.
3When a message appears that lets you specify the location for the 
software to be installed, click the Next button.
4If the program displays Do you want the Button Manager added to 
Windows Startup?, check Yes and click the OK button.
The setup program will start to copy the files.
5Click the Finish button when the message informs you that 
setup is successful.
The Sharpdesk installer will start.
8Begin installation of the Sharpdesk (This step will start if it was 
selected in step 4).
1After confirming the message in the Welcome to Sharpdesk 
installation window, click the Next button.
2Read the message in the Information window, and then click the 
Next button.
3When the Choose Destination Location window appears, click 
the Next button.
4When the Select Program Folder window appears, click the 
Next button.
The setup program will start to copy the files.
5Click the Finish button when the message informs you that 
Setup is complete.
9Click the Close button when the 
message informs you that Setup has 
finished. When the Now connect the 
MFP interface cable to the PC dialog 
box appears, click the OK button.
After the installation, a message to 
restart your computer may be 
displayed. In this case, click the Yes 
button to restart your computer. 
						

							46
10Connect the USB interface cable or parallel interface cable. 
(p.67)
Windows will detect the MFP and the Plug and Play screen will appear. If 
you are using Windows XP with the parallel interface, go to step 12.
11Begin installation of the scanner driver.
1SHARP AR-xxxx (where xxxx is the model name of your MFP) 
will appear in the Found New Hardware Wizard dialog box. 
Select Install the software automatically (Recommended) and 
click the Next button.
2The Install hardware dialog box will appear. Click the Continue 
Anyway button.
3When installation of the driver is completed, click the Finish 
button to finish the scanner driver installation.
12Begin installation of the printer driver.
1SHARP AR-xxxx (where xxxx is the model name of your MFP) 
will appear in the Found New Hardware Wizard dialog box. 
Select Install the software automatically (Recommended) and 
click the Next button.
2The Hardware Installation dialog box will appear. Click the 
Continue Anyway button.
3When installation of the driver is completed, click the Finish 
button to finish the printer driver installation.
You have completed the installation of all the software. 
						

							47
8
Installing onto Windows 98/Me/2000 (USB interface)
Before starting the installation, make sure the USB interface cable is not connected 
to the MFP.
1Insert the supplied CD-ROM into your CD-ROM drive.
2Double-click My Computer ( ), and then double-click the 
CD-ROM ( ) icon.
3Double-click the setup ( ) icon.
4Select the software packages to be 
installed, and then click the Next 
button.
The software packages with checkmark ( ) 
on the list on the screen will be installed. Click 
the Display README button to show the 
information on the selected package. 
5Review the software packages to be installed on the screen, 
and then click the Start button.
The software packages to be installed will be displayed on the screen. If 
inappropriate packages are displayed, click the Back button to select 
appropriate packages again.
When any of Hardware Found, or Found New Hardware Wizard 
messages appear during the software installation, be sure to click the 
Cancel button.
If the language selection screen appears after you double click the 
setup icon, select the language you wish to use and click the Next 
button. (Normally, the correct language is selected automatically.)
If the following screen appears, click the OK button. Review the 
contents in BEFORE INSTALLATION (p.41), and then select the 
appropriate driver software packages to be installed. 
						

							48
6Copying files for MFP driver installation.
1After confirming the message in the Welcome window, click the 
Next button.
2A dialog box appears asking you to verify that the interface cable 
is not connected to the MFP. Make sure that the interface cable is 
not connected and click the Next button.
3Click the Next button in the dialog box 
showing the files to be copied for installation 
of the MFP driver.
The setup program will start to copy the files.
In Windows 2000, if the following screen appears 
while the files are being copied (the message 
may appear more than once), click Yes in 
Windows 2000. 
4The following screen appears when all of the 
files for the USB interface connection have 
been copied. If you are not using a parallel 
interface cable for connection to the MFP, 
please click the No button.
5When the The MFP driver installation is complete. dialog box 
appears, click the OK button.
The Button Manager installer will start.
7Begin installation of the Button Manager (This step will start if it 
was selected in step 4).
1After confirming the message in the Welcome window, click the 
Next button.
2Read the message in the Please read the following information. 
window, and then click the Next button.
3When a message appears that lets you specify the location for the 
software to be installed, click the Next button.
4If the program displays Do you want to add Button Manager to 
Startup program?, check Yes and click the OK button.
The setup program will start to copy the files.
5Click the Finish button when the message to inform you of the 
completion of the installation appears.
The Sharpdesk installer will start.