Sharp Ar153e N Manual

49
8
8Begin installation of the Sharpdesk (This step will start if it was 
selected in step 4).
1After confirming the message in the Welcome to Sharpdesk 
installation window, click the Next button.
2Read the message in the Information window, and then click the 
Next button.
3When the Choose Destination Location window appears, click 
the Next button.
4When the Select Program Folder window appears, click the 
Next button.
The setup program will start to copy the files.
If the dialog box asking If you...

50
Installing onto Windows 95/98/Me/NT4.0/2000
 (Parallel interface)
Before starting the installation, make sure the USB or parallel interface cable is not 
connected to the MFP.
1Insert the supplied CD-ROM into your CD-ROM drive.
2Double-click My Computer ( ), and then double-click the 
CD-ROM ( ) icon.
3Double-click the setup ( ) icon.
4Select the software packages to be 
installed, and then click the Next 
button.
The software packages with checkmark ( ) 
on the list on the screen will be installed....

51
8
7Copying files for MFP driver installation and parallel interface 
setup (This step will start if it was selected in step 4).
1After confirming the message in the Welcome window, click the 
Next button.
2A dialog box appears asking you to verify that the USB or parallel 
interface cable is not connected to the MFP. Make sure that the 
interface cable is not connected and click the Next button.
3Click the Next button in the dialog box to 
install the MFP driver or Cancel to quit the 
installation....

52
8Begin installation of the Sharpdesk (This step will start if it was 
selected in step 4).
1After confirming the message in the Welcome to Sharpdesk 
installation window, click the Next button.
2Read the message in the Information window, and then click the 
Next button.
3When the Choose Destination Location window appears, click 
the Next button.
4When the Select Program Folder window appears, click the 
Next button.
The setup program will start to copy the files.
If the dialog box asking If you have...

53
8
INDICATORS ON THE OPERATION PANEL
The ONLINE indicator and the start ( ) indicator indicate the state of the printer or 
scanner.
Start indicator
On: Indicates the unit is ready for copying or scanning is being performed.
Blinking: The indicator blinks in the following situations:
When a print job is interrupted.
During initialization of the unit. (the cover has been opened and closed 
or the power turned off and on.)
When reserving a copy job.
When toner is being replenished during a copy or...

54
USING THE PRINTER MODE
Opening the printer driver from the start menu
Open the printer driver setup screen by the method shown below.
1Click the start button.
2Click Control Panel, select Printers and Other Hardware, 
and then click Printers and Faxes.
On Windows 95/98/Me/NT4.0/2000, select Settings and click Printers.
3Click the SHARP AR-xxxx (where xxxx is the model name of 
your unit) printer driver icon and from the File menu select 
Properties.
4Click Printing Preferences button in the General...

55
8
4Specify the print settings including the number of copies, 
media type, and print quality, and then click the Print button 
to start printing.
On Windows 95/98/Me/NT 4.0, click the OK button to start printing.
For details on print settings, see the online manual or the help file for the 
printer driver.
About interrupt copying
If you press the start ( ) key to begin a copy job while a print job using the paper 
tray or multi-bypass tray is in progress, the copy job will begin automatically after...

56
USING THE SCANNER MODE
Using the Button Manager
Setting up the Button Manager
The scanner driver for this unit includes an STI (Still image) driver and WIA 
(Windows Image Acquisition) driver. You can install software that supports the STI 
driver and WIA driver to enable scanning using only the operation panel of the unit.
The Button Manager accessory software supports the STI driver and WIA driver. Setup 
that is required in Windows to use the Button Manager is explained in the following.
Windows...

57
8
Windows 98/Me/2000
To scan directly into an application using the Button Manager on Windows 98, 
Windows Me and Windows 2000. Set the Event Manager properties to send only to 
Button Manager as shown below.
1Click the Start button, select Control Panel from Settings, 
and open Scanners and Cameras in start menu. 
2Select AR-xxxx (where xxxx is the model name of your 
unit), and click the Properties button.
In Windows Me, right click AR-xxxx (where xxxx is model name of your 
unit) and click...

58
Scan Button Destination Setting Dialog Box
After you have completed the Button Manager settings in 
Windows, configure the scan settings in Button Manager. 
To configure the scan settings in Button Manager, right click 
the ( ) icon in the Taskbar and select Setting from the 
menu that appears. 
For details on configuring the scan settings in Button 
Manager, see the online manual or the help file.
This is the corresponding setting in the Button 
Manager to automatically send multiple images 
from the...