Sharp Ar153e N Manual

INDEX
CONTENTS
15
3
Preview screen
Preview window
Click the Preview button in the Set-up 
screen to display the scanned image. You 
can specify the scanning area by dragging 
the mouse inside the window.
Auto Scan Area Adjustment button
Click when the preview screen is displayed to 
automatically set the scanning area.
Click the Auto Scan Area 
Adjustment button to adjust 
the scanning area 
automatically.Entire preview screen
Brightness/Contrast button
Click to change to the Brightness/Contrast 
screen...

INDEX
CONTENTS
16
3
If you are using Windows XP, you can use the WIA driver to scan from Sharpdesk, Paint and other WIA-compliant 
applications. The procedure for scanning using Paint is explained in the following.
1Place the original you wish to scan on the original 
table/RSPF/SPF.
Reference:For information on setting an original for scanning, refer
to ORIGINAL PLACEMENT in the Operation Manual.
2After starting Paint, click the File menu and select 
From Scanner or Camera.
The scan screen of the WIA...

INDEX
CONTENTS
17
3
3Select the paper source and picture type, and click 
the Preview button.
The preview image will appear.
If you placed the original on the original table, select 
Flatbed for the Paper source.
If you placed the original in the RSPF/SPF, select 
Document Feeder for the Paper source and specify 
the original size in Page size.4Click the Scan button.
Scanning begins and the image is acquired into Paint.
Use Save in your application to select a file name and 
folder for the scanned image,...

INDEX
CONTENTS
18
3
The procedure for scanning with the Scanner and Camera Wizard in Windows XP is explained here. The Scanner 
and Camera Wizard lets you scan an image without using a WIA-compliant application.
1Place the original you wish to scan on the original 
table/RSPF/SPF.
Reference:For information on setting an original for scanning, refer
to ORIGINAL PLACEMENT in the Operation Manual.
2Click the start button, click Control Panel, click 
Printers and Other Hardware, and then click 
Scanners and...

INDEX
CONTENTS
19
3
5Select the Picture type and Paper source, and 
click the Next button.
If you placed the original on the original table, select 
Flatbed for the Paper source.
If you placed the original in the RSPF/SPF, select 
Document Feeder for the Paper source and specify 
the original size in Page size.
You can click the Preview button to display the 
preview image.6Specify a group name, format and folder for saving 
the image, and then click the Next button.
JPG, BMP, TIF or PNG can be selected...

INDEX
CONTENTS
20
3
7When scanning ends, the following screen will 
appear. Select the next task you wish to perform, 
and then click the Next button.
If you are ready to end the session, click Nothing. Im 
finished working with these pictures.8Click the Finish button.
The Scanner and Camera Wizard closes and the 
scanned image is saved in the specified folder.
Scanning an Image from the Scanner and Camera Wizard (Windows XP) (part 3) 

INDEX
CONTENTS
21
3
Button Manager is a utility software to link scanning functions to the SCANNER key on the unit. This software enables 
you to set scanning functions to six different scan menus, which will be linked the SCANNER key on the unit.
Reference:To begin scanning using the units operation panel, settings must be established in the Control Panel after the Button Manager  is 
installed. For information on installing the Button Manager, establishing the Control Panel settings, and scanning using...

INDEX
CONTENTS
22
3
After being installed, Button Manager normally keeps active under the Windows operating system. Follow the steps 
shown below to set scan options as you like.
For details on the settings in the setting screen of Button Manager, see Button Manager Help.
1Right-click the Button Manager icon ( ) on the task 
bar.
2Select Settings from the displayed pop-up menu.
The setting screen of Button Manager will open.
Reference:Outline of Button Manager
3Click the tab of the scan menu you want to...

INDEX
CONTENTS
23
4
When any trouble has occurred in the unit, first, verify whether you can make a copy or not with the unit. Check the 
items shown below when the unit does not work properly but it can make a copy.
Reference:If any copier trouble occurs, refer to TROUBLESHOOTING in the Operation Manual.
If you fail to solve the problem after verifying all the items listed above, please 
contact your authorized SHARP service center.
Note
Make sure that the unit is not working. You cannot print from your...

INDEX
CONTENTS
24
4
CHECK1Is the interface cable compatible with the 
unit and computer?
Interface cables compatible with this unit are USB 
and parallel cables. Check which type of cable is 
supported by your computer, and then purchase 
one of the following cables accordingly:
USB cable
Shielded twisted pair cable (6 feet Max.: high-speed 
transmission equivalent)
Parallel interface cable
IEEE 1284 - Shielded type bi-directional parallel 
interface cable (6 feet Max.)
CHECK2Is the interface cable...