Sharp Ar153e N Manual

39
7
250-SHEET PAPER FEED UNIT (AR-D16)
The paper feed unit provide the convenience of increased paper capacity for the unit 
and a greater choice of paper size readily available for copying.
The procedures for loading paper in the 
paper tray of paper feed unit, changing 
the paper size, and selecting the paper 
tray are same as for the paper tray in the 
unit. See LOADING THE PAPER TRAY 
(p.8) and SELECTING THE TRAY 
(p.19).
Using the paper feed unit with the printer function 
(when the AR-PG2 is...

40
The procedure for installing the software for the optional AR-PG2 Printer/Scanner
Expansion Kit and the operation of the printer/scanner is explained here. Information
on how to use the online manual is also provided.
Illustrations of driver screens and other computer screens show the screens that 
appear in Windows XP Home Edition. Some of the names that appear in these 
illustrations may differ slightly from the screens that appear in other operating 
systems.
The following term is used in this...

41
8
HARDWARE AND SOFTWARE REQUIREMENTS
Check the following hardware and software requirements in order to install the software.
*1Compatible with Windows 98, Windows Me, Windows 2000 Professional, Windows XP 
Professional or Windows XP Home Edition preinstalled model with USB interface 
equipped as standard.
*
2Printing is unavailable in MS-DOS mode.
*3The administrators authorization is required to install this software using this installer.
BEFORE INSTALLATION
The following table shows the drivers and...

42
Flow of installation
Refer to the following table and then begin installation.
Operating
systemInterface Reference pages for how to install
Windows XPUSB/
ParallelInstalling onto Windows XP (USB/parallel interface) 
(p.43)
Windows 98USB
Installing onto Windows 98/Me/2000 (USB interface) (p.47)
ParallelInstalling onto Windows 95/98/Me/NT4.0/2000 
(Parallel interface) (p.50)
Windows MeUSB
Installing onto Windows 98/Me/2000 (USB interface) (p.47)
ParallelInstalling onto Windows 95/98/Me/NT4.0/2000...

43
8
INSTALLING THE SOFTWARE
The following term is used in this section.
MFP 
Means the unit as a printer and scanner.
Installing onto Windows XP (USB/parallel interface)
Before starting the installation, make sure the USB or parallel interface cable is not 
connected to the MFP.
1Insert the supplied CD-ROM into your CD-ROM drive.
2Click the start button, click My Computer ( ), and then 
double-click the CD-ROM ( ) icon. 
3Double-click the setup ( ) icon.
4Select the software packages to be 
installed,...

44
5Review the software packages to be 
installed on the screen, and then click 
the Start button.
The software packages to be installed will be 
displayed on the screen. If inappropriate 
packages are displayed, click the Back button 
to select appropriate packages again.
6Copying files for MFP driver installation (This step will start if it 
was selected in step 4).
1After confirming the message in the Welcome window, click the 
Next button.
2A dialog box appears asking you to verify that the USB or...

45
8
7Begin installation of the Button Manager (This step will start if it 
was selected in step 4).
1After confirming the message in the Welcome window, click the 
Next button.
2Read the message in the Please read the following information. 
window, and then click the Next button.
3When a message appears that lets you specify the location for the 
software to be installed, click the Next button.
4If the program displays Do you want the Button Manager added to 
Windows Startup?, check Yes and click the...

46
10Connect the USB interface cable or parallel interface cable. 
(p.67)
Windows will detect the MFP and the Plug and Play screen will appear. If 
you are using Windows XP with the parallel interface, go to step 12.
11Begin installation of the scanner driver.
1SHARP AR-xxxx (where xxxx is the model name of your MFP) 
will appear in the Found New Hardware Wizard dialog box. 
Select Install the software automatically (Recommended) and 
click the Next button.
2The Install hardware dialog box will appear....

47
8
Installing onto Windows 98/Me/2000 (USB interface)
Before starting the installation, make sure the USB interface cable is not connected 
to the MFP.
1Insert the supplied CD-ROM into your CD-ROM drive.
2Double-click My Computer ( ), and then double-click the 
CD-ROM ( ) icon.
3Double-click the setup ( ) icon.
4Select the software packages to be 
installed, and then click the Next 
button.
The software packages with checkmark ( ) 
on the list on the screen will be installed. Click 
the Display README...

48
6Copying files for MFP driver installation.
1After confirming the message in the Welcome window, click the 
Next button.
2A dialog box appears asking you to verify that the interface cable 
is not connected to the MFP. Make sure that the interface cable is 
not connected and click the Next button.
3Click the Next button in the dialog box 
showing the files to be copied for installation 
of the MFP driver.
The setup program will start to copy the files.
In Windows 2000, if the following screen appears...