Sharp AR M620N User Manual

SPECIAL MODES
5-5
5
Dual page copy
The dual page copy function produces separate copies of two documents placed side by side on the document glass.
This function is especially useful when copying books and other bound documents.
[Example] Copying right and left pages of a book
1Touch the [DUAL PAGE COPY] key on the
special modes screen.
The [DUAL PAGE
COPY] key will be
highlighted to indicate
that the function is
turned on, and the dual
page copy icon ( ) will
appear in the upper left
of the screen....

SPECIAL MODES
5-6
Pamphlet copy
The pamphlet copy function is used to arrange copies in proper order for eventual centre-stapling and folding into a
booklet. Two original pages are copied onto each side of copy paper. Four pages are, therefore, copied onto one sheet.
This function is convenient for arranging copies into an attractive booklet or pamphlet.
[Example] Copying eight originals in the pamphlet copy mode

Scan the originals from the first page to the last
page. The order of copying will be...

SPECIAL MODES
5-7
5
5Select whether or not you wish to copy on
the cover (YES or NO).
6Select the paper tray for the cover.
The currently selected
paper tray for the
cover is displayed.
The size and type of
paper in the currently
selected tray is
displayed.
In the example screen above, A4 (8-1/2 x 11)
size plain paper is loaded.
To change the paper tray for the cover, touch the
tray selection key. (In the screen example, the
BYPASS TRAY display is the tray selection key.)
The tray selection screen...

SPECIAL MODES
5-8
Job build
Use job build mode when you need to copy more original pages than can be loaded at once in the document feeder
(the maximum number of pages that can be loaded is 150). This function allows the original pages to be scanned in
sets.
[Example] Copying 300 pages of A4 originals
1Touch the [JOB BUILD] key on the special
modes screen.
The [JOB BUILD] key
will be highlighted to
indicate that the function
is turned on, and the job
build icon (
) will
appear in the upper left
of the...

SPECIAL MODES
5-9
5
Tandem copy
Two machines connected to the same network can be used to run a large copy job in parallel.
By dividing the job in half, approximately half the time is required to complete the job.
To use this function, two machines must be connected to your network as network printers. Even if more machines are
connected to the network, this function can only be used to have one other machine share a job.
Server machine and client machine

In the following explanations, the machine on...

SPECIAL MODES
5-10
5Press the [START] key.
NOTES

To perform tandem copying, the server machine
and client machine must meet certain conditions.
After the [START] key is pressed on the server
machine, the server machine verifies that the
conditions have been met. If the conditions have
not been met, tandem copying does not begin
and TANDEM OUTPUT IS NOT ALLOWED.
OUTPUT ALL SETS USING MASTER
MACHINE? appears in the display. To have the
server machine make all the copies, touch the
[OK] key. To cancel the...

SPECIAL MODES
5-11
5
Covers/inserts
A different type of paper can be inserted in positions corresponding to front and back covers of a copy job when the
automatic document feeding function is used. A different type of paper can also be automatically added as an insert
at specified pages.
As an example, tabbed paper can be added as inserts at the beginning of chapters or at other pages to create an
indexed document.

Covers/inserts can be disabled in the key operator programs (page 11 of the key operators...

SPECIAL MODES
5-12

 Procedure for inserting front and back cover paper
The paper for the front cover is called the front cover paper (FRONT COVER in the touch panel). The paper
for the back cover is called the back cover paper (BACK COVER in the touch panel).

Examples of insertion methods for the front and back cover paper are given on pages 5-17 to 5-20.
1Touch the [COVERS/INSERTS] key in the
special modes screen (2nd screen).
2Touch the [PAPER TRAY SETTINGS] key.
3Select the tray used for the...

SPECIAL MODES
5-13
5




 
Procedure for adding inserts
You can have different paper automatically inserted as an insert at a specified pages. Two types of insert paper
can be used. These are specified with the [INSERTION TYPE A SETTING] key and [INSERTION TYPE B
SETTING] in the touch panel. Tabbed paper can be used as an insert.
Examples of insertion methods for insert paper are given on page 5-21.
1Touch the [COVERS/INSERTS] key in the
special modes screen (2nd screen).
2Touch the [PAPER TRAY...

SPECIAL MODES
5-14
8Touch the [INSERTION SETTINGS] key to
specify the pages where you wish to insert
the insert papers of [INSERTION TYPE A
SETTING] and [INSERTION TYPE B
SETTING].
9Touch the [INSERTION TYPE A] key or the
[INSERTION TYPE B] key, enter the page
number where you wish to insert the insert
paper with the numeric keys, and then
touch the [ENTER] key.
(X) shows the total number of inserts. Up to 100
inserts can be added. When inserting multiple
inserts, touch the [ENTER] key after each entry...