Sanyo Projector Plv Hd10 Specifications

							Distributed by:
Safety Precautions      
 
Remarks 
*Caution: please consult the instruction manual to ensure safe and proper operation of the product.
 Do not install the LCD projector in areas exposed to water, humidity, dust, oil or smoke or in close proximity to heat sources. Make sure the heat vents are not blocked.  Fire, electrical shock or unit malfunction may 
result if the above precautions are neglected.   Do not look through the lens while projecting as damage to the eyes could result. Take special care when children are close by.  Do not look at the laser beam coming out of 
the remote control unit or direct the laser beam  toward a person. Direct contact with the laser beam may cause damage to the eyes.
 LCD panel manufacturing requires extremely high-precision technology with pixels having a 99.99% quality control rating. However, there does exist a 0.01% or smaller possibility of dead pixels or constantly lit pixels. 
 Please note that product colors in the brochure may differ slightly from those of actual products.  All screen pictures in the catalog are simulated.  Product appearance and specifications subject to change without notice. 
Further details regarding this product can be accessed at http:http://w//www.sanyo-lcdp.com/engw.sanyo-lcdp.com/english/lish/
Real HDTV 1080i Projection
PLV-HD10
Specifications & Dimensions  
(uni t : mm)
Real UXGA Projector 5500 lm
PLV-HD10
UXGA 6,760,000UXGA 6,760,000HDIDHDID    6,220,8006,220,800
32.5 446.0
139.5 112.0
783.0
6.5
581.0
5.7Ã
60.0
PLV-HD10
3-color LCD shutter projection system
Dichoroic mirror separation/prism synthesis sytem
1.65-inch (16:9), x 3, with micro-lens
Polysilicon active matrix TFT
6,220,800 pixels: 2,073,600 (1,920 x 1,080) x 3
Stripe
Optional
250W UHP x 4
40 to 600 inches diagonal
Differs depending on installed lens
Full color (16.77 million colors)
5,500 lumens
90%
1,000:1 (full on/off)
46 dB
3 W + 3 W
Ø7 cm x 2
H-sync: 15–120 kHz, V-sync: 50–120 Hz, Dot clock: 230 MHz (sync on G)
1,920 dots
1,100 TV lines
Input 1: Dual-SDI (HD/ SD-SDI) 
Input 2: RGBHV/Y, Pb/Cb, Pr, Cr (BNC x 5) Audio (RCA x 2), Control (mini DIN8pin)
Input 3: DVI-I (HDCP)
Input 4: (OPEN)
5–35 C
AC 120–240 V, 50/60 Hz, auto voltage
1,500 W
581 x 252 x 783 mm
38 kg
Owner’s manual, warranty card, AC power cord (3 m, x 3), light shield (x 6), lens attachment (x 2), wireless/wired remote control (x 1), 
AA-size dry batteries for remote control (x 2), cable for remote control (x 1), dust cover (x 1), control cable (x 1), 
DVI/D-sub (15pin) adapter, DVI cable (x 1), DVI/Mac adapter (x 1), Real Color Manager CD-ROM (x 1)
Size
Drive system
Number of pixelsConfiguration
RGB
Video Model number
System
Optics
LCD panel
Lens
Lamp
Projection size
Throw distance
Color reproduction
Brightness*
Uniformity*
Contrast ratio*
Noise
Audio output
Speaker
Scanning frequency
Horizontal resolution
Signal Terminals
Operating temperature
Power supply
Power consumption
Dimensions (W x H x D)
Net weight
Standard accessories
Other functions Expected lamp life: 1,500 hours (with lamp replacement LED indication)   Power zoom/focus/lens shift   Freeze   No Show
 6 color system (NTSC, NTSC 4.43, PAL, PAL-M, PAL-N, SECAM)   HDTV-ready (480i, 480p, 575i, 575p, 720p, 1035i, 1080i)
 3D Y/C separation   3D noise reduction   New progressive scan (1080i)   Lamp mode   Color management   Lamp power control
 Auto picture control   Auto fan control   Key lock   Screen adjustment   On-start
 12-language menu (English, German, French, Spanish, Italian, Portuguese, Dutch, Swedish, Russian, Chinese, Korean, Japanese)
 Network-ready   Real Color Manager software supplied
* Measured in compliance with “Guidelines for LCD Projector Measuring Procedures and Measuring Conditions” (June 1999) by the Japan Business Machine Makers Association (JBMA).
SpecificationsExternal dimensions (unit:mm)
SANYO Electric Co., Ltd.AV Solutions Company©2004 SANYO Printed in Japan 2004.5.SI
SML-046 
						

							The PLV-HD10 multimedia LCD projector uses Sanyos most advanced video, 
optical and digital technologies to deliver precise, true HDTV 1080i projection. 
With a high-contrast optical system that features three 1,920 x 1,080 pixel LCD panels, 
12-bit progressive scanning and a trio of 3D digital circuits, 
the PLV-HD10 provides the superior picture quality demanded in high-level professional applications. 
High-Quality, Real HDTV  1080i Images
12 
						

							
Higher Performance
High-Intensity, High-Precision Projection
High-Contrast Optical System
The PLV-HD10s optical system achieves outstanding 1,000:1 contrast. 
This means easy-to-see images with deep, rich blacks that deliver the fu\
ll
 viewing power of cinema sources.
Four-Lamp Optical System for 5,500-lm Brightness
Four 250-W UHP (1.35-mm short arc) lamps combine to provide 5,500 lumens of brightness. You can also 
stack two PLV -HD10 units for even more powerful projection with double the  brightness Ñ11,000 lm. 
Brightness uniformity exceeds 90%.
High-Color-Purity Optical System
This advanced Sanyo system improves reproducibility of the three 
primary colors (red, blue, and green) to deliver a superior overall co\
lor 
performance thats suitable for digital cinema.
Real HDTV 1080i Projection
The PLV-HD10 employs three 1.65-inch TFT polysilicon LCD panels 
(16:9 aspect ratio) with micro lenses. With  1,920 x 1,080 pixels in each panel 
(for a total of 6,220,800 pixels), the PLV-H D10 can project native HDTV  1080i 
signals in  full resolution.
4
3
Selectable Lighting Modes
Two brightness modesÑhigh-brightness and economyÑlet you select the\
 lighting mode thats best suited to the conditions and
your application. In high-brightness mode all four lamps are turned on. \
Economy mode gives you half the brightness but twice 
the usable time. The PLV-HD10 includes a fail-safe function that automatically switches the mode\
 if a lamp is accidentally 
turned off. It switches from four lamps to two, or from two lamps to one*.
* A switchover to the  one-lamp mode only occurs if an emergency should arise. In one-lamp mode\
, color and brightness correction is not performed. 
						

							Digital Technology for Superb Picture Quality
Beautiful Images from a  Variety of Sources
3D-AUCC Circuit
The 3D Automatic Uniformity Correction Control circuit provides precise compensation at some 7,425 points for smooth , 
natural gradation. Compared with conventional systems*, this provides more than 10 times the control over color problems 
caused by a lack of brightness conformity. yyyyyyyyyyyyyyyyyyy
* Conventional AUCC circuits use 624 correction points.
Crosstalk/Ghosting Canceller
This eliminates ghosts or after-images. The crosstalk canceller reduces signal 
interference between the drive circuits on the liquid crystal panels. Line/dot 
inversion helps reduce the signal interference between pixels.
Triple 3-D Digital Circuits
The PLV-HD10 incorporates three 3-D digital circuits. A 3-D digital progressive circuit provides interlace/progressive conversion of 
1080i signals. A 3-D digital Y/C separation circuit helps boost resolution and reduce noise, and a 3-D motion-adaptive digital noise 
reduction circuit reduces signal interference between pixels.
10-Bit Digital Gamma Correction
A 10-bit digital gamma correction control function provides smoother gradation 
characteristics by adjusting the gradation according to the input image.
New Progressive Scan IC for Smoo th, Clear Moving Pictures
A newly developed progressive scan IC provides 12-bit processing of HDTV 1080i signals. Moving pictures are smooth 
and clear thanks to Sanyos original motion adaptive line interpolation, which greatly improves jagged diagonal lines. 
The PLV-HD10s full 2-3 pulldown compatibility assures superior viewing quality from film sources.
Telecine Corrective I/P Conversion Technology
The PLV-HD10 detects when you input telecine images that have been converted from film to video, and faithfully reproduces the 
original frames. To boost detection accuracy, it evaluates the motion of each pixel and then uses the cumulative value to determine 
whether the image is telecine or conventional.
Intelligent Sharpness Controller
This circuit uses gain-adaptive LTI (Luminance Transient Improvement), gain-adaptive CTI (Color 
Transient Improvement), and gain-adaptive edge emphasizing technologies to sharpen the detail in areas 
where the image signal is shallow, such as in ruled lines and in characters prone to generating bright lines. 
The result is clearer, sharper images from both RGB and video sources.
High-Quality I/P Conversion Technology
This technology reduces jaggedness in diagonal lines by adaptively complementing 
pixels according to a diagonal correlation value determined from 33 horizontal and 
4 vertical pixels. The pixel area sampled is optimized to improve the correlation 
value and motion-detecting precision. This also improves jaggedness in lines that 
are nearly horizontal Ñ something that was difficult in the past.
56 
						

							Supporting Various User Systems
Superb Expandability
Two lens adapters supplied.
Multi-Versatile Interface Platform (MVIP) System
The PLV-HD10 has four slots for accommodating interface boards, which allows the user to interchange any of supplied board 
with the desired optional board*  The RS-232C input and cross-through output terminals are also provided for easy and flexible 
system conf iguration.    
Optional Network Board
Adding the optional network board enables more precise settings and remote operation than the control via the RS-232C interface.
Power-Driven Lens Shift
The PLV-HD10s power-driven lens shift (up/down and left/right) is especially effective for projection with two units stacked.
Other Features
¥ Intelligent AI
¥ React image function
¥ High-resolution, 30-bit color projection: 1,073,741,824 colors
¥ Multi-color on-screen menu
¥ RS-232C in and out terminals (daisy chain supported)
¥ On-Start: Allows quick projection simply by switching the system on 
¥ Power management function automatically turns the powe off when no signals are entered   
¥ Retractable carrying bar   
¥ Adjustable leg system with a pop-up handle and shuttle dials 
¥ Many presentation support functions, including freeze, No Show and so on  
¥ High-definition digital resizing with DRIT   
¥ Rear and hanging projection capability  
¥ Built-in stereo amplifier and speakers (3W + 3W) 
¥ Wireless/wired mouse remote controller with built-in   
¥ Auto Picture Control  ¥ Auto Lamp Control 
Easy-Replaceable Lenses
Responding to a Host of Large-Screen Needs
Project crisp, sharp images from a variety of 
sources - PCs, document cameras, VTRs and more. 
With the PLV-HD10s high output and brightness, theres no
need to dim the room lights - so viewers can read handouts and 
take notes comfortably during the presentation. Using a PC 
gives you total control over image source switching, for easy, 
flexible large-screen presentations.
Stack two PLV-HD10 units, and you can project images from 
high-definition sources onto a large screen at an even higher 
brightness level. Using a system control PC, all facets of the
presentation - from start-up and brightness adjustment to image 
source switching - can be handled automatically. The PLV-HD10 
is also ideal for electric cinema - a concept now drawing 
attention as a next-generation movie distribution system.Conventions and Other Events
Theaters and Halls
Monitor Control
Choose any of nine optional lenses, from short-throw to zoom magnification. The bayonet-mount system 
makes replacement easy: simply mount the lens in the supplied adapter and screw the adapter in place.
DVD PRO HD VTRHD D5 VTR
DVD Player
Lighting Control S-VHS VTR
Scan ConverterRGB Switcher
Screen HD10 x 2
Video Signal (SDI)
Video Signal (Analog)
Control Signal TBC
PC for
System
Control
Interface
PC 1
CS/BS
Tuner
Security
Camera
SystemDVD
PlayerS-VHS
VTRTeleconference
System
Video Switcher
ScreenHD10
Video Signal (Analog)
Control Signal TBCInterfaceSignal Center
PC 2
Interface
VOD
Document Camera
PC for System Control
Interface
CS/BS
Tuner
Security Camera
SystemS-VHS
VTR Video Switcher
Screen
Video Signal (Analog)
Control Signal TBC Double Speed
Converter
InterfaceRGB Matrix Switcher Workstation 1
(Monitoring)
Workstation 2
(Monitoring)
Workstation 3
(Monitoring)
Interface
PC for System Control
Screen
Interface
PC 1
Real Color Management
This makes it easier to adjust the white balance and gamma curve adjustments: simply compare the projected images from the enclosed 
CD-ROM* with the images on the enclosed photo sheet. Because you can view the image as you adjust the settings, its easy to attain 
faithful color reproduction in almost any projection environment. This function also responds to professional needs by allowing precise 
color settings using the gamma curve for each RGB color. Once settings are correct, you can store them on a PC** and later retrieve 
them for easy set-up.  
  
* Windows 98/Me/2000/XP  ** One batch of settings can be saved in projector memory.
8
7 
						

							Lenses Option
Screen size  Max. zoomMin. zoomMax. zoomMax. zoomMax. zoomMin. zoomThrow/stackpointStack pointThrow
yLNS-W01Zy
45±
F2.5
175±
5.8µ
10:0
0:10
2332
 8G43