Sanyo Projector Plv 80l User Manual

51
APPENDIX
AutoPALSECAMNTSCNTSC 4.43PAL-MPAL-N
Video Input
Auto
1035i720p575p480p575i480i
Quit
Full
Zoom
0 - 630 - 630 - 630 - 63
Off/On/Film
Volume
Language
System (3)
System (2)
Image AdjustContrastBrightnessColorTint
RedGreenBlueSharpness
ResetStore
Gamma
Progressive
0 - 630 - 630 - 630 - 310 - 15
Image 1
Image 10
Screen
Sound
SettingEnglishGermanFrenchItalianSpanishPortugueseDutchSwedish
ChineseKoreanJapanese
Store/Reset
Blue/My logo/Black
Off/Countdown Off/On
Logo select
On/Off
On/Off
Off
On/Off...

52
APPENDIX
COMPATIBLE COMPUTER SPECIFICATIONS
–––––––– 
(Interlace)
1024 x 768
(Interlace)
ON-SCREEN
DISPLAYRESOLUTIONH-Freq.
(kHz)V-Freq.
(Hz)
VGA 1640 x 48031.4759.88
VGA 2720 x 40031.4770.09
VGA 3640 x 40031.4770.09
VGA 4640 x 48037.8674.38
VGA 5640 x 48037.8672.81
VGA 6640 x 48037.5075.00
MAC LC13640 x 48034.9766.60
MAC 13640 x 48035.0066.67
MAC 16832 x 62449.7274.55
MAC 191024 x 76860.2475.08
MAC 211152 x 87068.6875.06
45.0060.00
SVGA 1800 x 60035.15656.25
SVGA 2800 x 60037.8860.32
SVGA 3800 x...

53
APPENDIX
NOTE :Specifications are subject to change without notice.
ON-SCREEN
DISPLAYRESOLUTIONH-Freq.
(kHz)V-Freq.
(Hz)
D-VGA640 x 48031.4759.94
D-480p720 x 480
(Progressive)31.4759.88
D-575p768 x 575
(Progressive)31.2550.00
D-SVGA800 x 60037.87960.32
D-XGA1024 x 76843.36360.00
ON-SCREEN
DISPLAYRESOLUTIONH-Freq.
(kHz)V-Freq.
(Hz)
D-WXGA11366 x 76848.3660.00
D-WXGA51368 x 76846.5050.00
D-1035i1920 x 1035
(Interlace)33.7560.00
D-1080i1920 x 1080
(Interlace)33.7560.00
D-1080i1920 x 1080...

54
APPENDIX
• • • on• • • dim• • • off• • • flashing
✽When the life of the projection lamp draws to an end, the LAMP REPLACE indicator lights yellow.  When this indicator lights yellow,
replace the projection lamp with a new one promptly.  Reset the Lamp Replace Counter after replacement of the lamp.  
The projector is being cooled down. It cannot be turned on until
the READY indicator lights green.  
Projector ConditionLAMP
REPLACE
yellow
Indicators
READYgreen
LAMPred
WARNING
TEMP.
red
The projector...

55
Owner’s Manual
AC Power Cord
Wireless/Wired Remote Control Transmitter and Batteries
Control Cable for Serial port 
Lens Cover (PLV-75/PLV-80)
PIN Code Label
Multi-media Projector
Accessories
●Specifications are subject to change without notice.
TECHNICAL SPECIFICATIONS
1.21 TFT Active Matrix type, 3 panels
19.2 lbs (8.7 kg) PLV-75/PLV-80, 16.3 lbs (7.4 kg) PLV-75L/PLV-80L
12.6 x 6.6 x 16.8 (319 mm x 168 mm x 429.5 mm) 
1366 x 768 dots
3,147,264 (1366 x 768 x 3 panels)
PAL, SECAM, NTSC, NTSC4.43,...

56
APPENDIX
This projector is compliant with PJLink Standard Class 1 of JBMIA (Japan Business Machine and Information System Industries
Association). This projector supports all commands defined by PJLink Class 1 and is verified conformance with PJLink Standard
Class 1.
PJLink is a registered trademark of JBMIA.
PJ LINK NOTICE
SANYO Projector Input
RGB (AV HDCP)
RGB (PC (Analog)
RGB (PC Digital)
RGB (Scart)
Video
Y, Pb/Cb, Pr/Cr
RGB
PJLink Input
DIGITAL 2
RGB 1
DIGITAL 1
RGB 2
VIDEO 1
VIDEO 2
Video
Y,...

57
CONFIGURATIONS OF TERMINALS
COMPUTER INPUT-1 TERMINALS (ANALOG)
Terminal : HDB15-PIN 
512341096781514131112
Red Input
Ground (Horiz.sync.)
Green Input
Sense 2
Blue Input
Ground (Red)
Ground (Green)
Ground (Blue)
1
5
2
4
3
6
7
8
+5V Power
Horiz. sync.
Ground (Vert.sync.)
DDC Data
Sense 0
Vert. sync.
DDC Clock
9
13
10
12
11
14
15
Pin Configuration
Terminal : Mini DIN 8-PIN
12
345876
Pin Configuration
CONTROL PORT CONNECTOR
-----
CLK
DATA
GND
-----
-----
GND
-----
R X D
-----
-----
GND
RTS / CTS
T X D...

58
APPENDIX
OPTIONAL PARTS
The parts listed below are optionally supplied.  When ordering those parts, give the name and Type No. to the sales dealer.
●DVI  Cable Type No. : KA-DV20
●HDB 15 pin-SCART 21 pin Cable Type No. : POA-CA-SCART
●Long Zoom Lens  Type No. : LNS-T31A
●Ultra Long Zoom Lens Type No. : LNS-T32
●Short Zoom Lens Type No. : LNS-W31A
●Short Fixed Lens Type No. : LNS-W32
●PJ-Net Organizer Type No. : POA-PN40
LENS REPLACEMENT
The lens of this projector can be replaced with other optional...

59
APPENDIX
Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost the number
and unable to operate the projector, contact the service station. 
Factory default set No:  1 2 3 4*
Factory default set No:  4 3 2 1*
*Should the four-digit number be
changed, the factory set number will
be invalid.
Put the label below (supplied) on in a prominent place of the
projectors body while it is locked with a PIN code.
While the projector is locked with the PIN...

Printed in Japan
Part No. 610 324 1739 (1AA6P1P4949-- M4YA)
SANYO Electric Co., Ltd