Sanyo Projector Plv 30 User Manual

11
CONNECTING THE PROJECTOR
TERMINALS OF THE PROJECTOR
COMPUTER INPUT TERMINAL
Terminal : HDB15-PIN 
Connect the display output terminal of the computer to COMPUTER INPUT terminal of this projector with the VGA Cable
(not supplied).  When connecting the Macintosh computer, the MAC Adapter (not supplied) is required.
512341096781514131112
Red Input
Ground (Horiz.sync.)
Green Input
Sense 2Blue Input
Ground (Red)Ground (Green)Ground (Blue)
1
5
2
43
678
No Connect
Horiz. sync.
Ground (Vert.sync.)
Sense...

12
CONNECTING THE PROJECTOR
CONNECTING TO THE VIDEO EQUIPMENT
COMPUTER IN
COMPUTER
SERVICE PORT
RESET
AUDIO
INAUDIO   OUT
S – VIDEO
AV
Y  –  Pb/Cb – Pr/CrVIDEO
Video Source (example)
Video Cassette Recorder Video Disc Player
Video Cables 
(RCA x 1)S-VIDEO 
Cable
Audio Amplifier Audio Speaker (stereo)
Audio
Cable ✽
Terminals 
of the Projector
Use any of VIDEO jack Y-Pb/Cb-Pr/Cr
jacks or S-VIDEO jack.
•When both VIDEO jack and S-
VIDEO jack are connected, the S-
VIDEO jack has priority over the
VIDEO...

13
CONNECTING THE PROJECTOR
S – VIDEO
SERVICE PORT
RESET
AUDIO
INAV
Y  –  Pb/Cb – Pr/Cr
COMPUTER IN
COMPUTERAUDIO   OUT
VIDEO
13 MODE (640 x 480)
16 MODE (832 x 624)
19 MODE (1024 x 768)OFF ON ON
ON ON
ON ONOFF OFF OFF
OFF OFF OFF OFF
OFF OFF OFF OFF1234 56
OFF OFF ON ON ON ON 21 MODE (1152 x 870)
ON
1DIP23456
ON
OFF
CONNECTING TO THE COMPUTER
IBM-compatible computers or Macintosh computers (VGA / SVGA / XGA / SXGA)
VGA Cable 
✽
Monitor Output Desktop type Laptop typeAudio Speaker
(stereo)
Audio...

14
BEFORE OPERATION
VIDEOCOMPUTER ON – OFF
KEYSTONED.ZOOM VOLUME
MENU
SELECT
NO SHOW
FREEZE NORMALMUTE
AUTO
IMAGEP
 – TIMER
MUTE BUTTON
Used to mute sound.(P20)
NO SHOW BUTTON
Used to turn the picture into
black image.  (P20)
AUTO IMAGE BUTTON
Use to operate AUTO
IMAGE function.  (P26)
VOLUME BUTTONS
Used to adjust volume.  (P20)
D.ZOOM BUTTONS
Used to select DIGITAL
ZOOM mode and resize the
image. (P27)
KEYSTONE BUTTONS
Used to correct the
keystone distortion.
(P19, 27, 31)
FREEZE BUTTON
Used to freeze...

15
ON – OFFMENU
MODENORMAL
LAMP
REPLACEWARNING
TEMP.READYLAMP
WIDETELE
BEFORE OPERATION
TOP CONTROLS AND INDICATORS
Used to open or close
the MENU operation.
(P16, 17)
MENU BUTTON
MODE BUTTON
READY INDICATOR
SELECT BUTTON
POWER ON–OFF BUTTON
NORMAL BUTTON
WARNING TEMP. INDICATOR
LAMP INDICATOR
POINT BUTTONS
LAMP REPLACE INDICATOR
Used to select input source
either Computer or Video.
(P21, 28)
This indicator lights
green when the projector
is ready to be turned on.
And it flashes green in
Power...

16
MENU
SELECT
NO SHOW
FREEZE NORMALMUTE
BEFORE OPERATION
HOW TO OPERATE ON-SCREEN MENU
FLOW OF ON-SCREEN MENU
Display ON-SCREEN MENU
Press MENU button to display the ON-SCREEN MENU
(MENU BAR).  The red frame is the POINTER.
Select the ITEM by pressing SELECT button.  The dialog
box of the ITEM appears.
Move the POINTER (red frame) to the ITEM ICON that
you want to select by pressing POINT RIGHT/ LEFT
buttons.
Move the POINTER to the ITEM that you want to adjust
and adjust the ITEM by pressing SELECT...

17
BEFORE OPERATION
MENU BAR
SYSTEM MENU
Used to select a
computer
system.
(Refer to P21)
IMAGE MENU
Used to adjust the
computer image. [Fine sync
/ Total dots / White Balance /
Contrast / Brightness /
Gamma]
(Refer to P25)
PC ADJUST MENU
Used to adjust the
parameters to
match with the input
signal format.
(Refer to P22, 23)
SETTING MENU
Used to adjust Volume,
set the Display Menu and
reset Lamp Replacement
Monitor Timer. 
(Refer to P32, 33)
MODE MENU
Used to select
the Computer
input mode.
(Refer to...

18
BASIC OPERATION
TURNING ON THE PROJECTOR
Connect the projectors AC Power Cord into a wall outlet.  The
LAMP indicator lights RED, and the READY indicator lights
GREEN.
Press the power ON-OFF button on the Remote Control Unit or
on the Top Control to ON.  The LAMP indicator dims, and the
Cooling Fans start to operate.  The Preparation Display appears
on the screen and the count-down starts.  The signal from the
source appears after 30 seconds.
2
3
TURNING OFF THE PROJECTOR
Press the power ON-OFF button...

19
BASIC OPERATION
ADJUSTING THE IMAGE
KEYSTONE ADJUSTMENT
1Press the  KEYSTONE /buttons on the Remote Control Unit
or select the Keystone on the SCREEN menu.  (Refer to page
27, 31.)  The message “Keystone” is displayed.
2Correct the Keystone distortion by pressing the KEYSTONE
/buttons or the POINT UP/DOWN buttons.  Press the
KEYSTONE button or the POINT UP button to reduce the
upper part or the image, and press the KEYSTONE button or
the POINT DOWN button to reduce the lower part.  
The message...

20
BASIC OPERATION
Press the VOLUME (+/–) buttons on the Remote Control Unit to
adjust the volume.  The Volume dialog box appears on the
screen for a few seconds.The VOLUME (+) button increases
the volume, and the VOLUME (–) button decreases the
volume.
The sound volume can be adjusted through the ON-SCREEN
MENU.  (Refer to page 32.)
Press the MUTE button on the Remote Control Unit to mute the
sound.  To restore the sound to its previous level, press the
MUTE button again or press the VOLUME (+/–)...