Sanyo Projector Plv 1080hd User Manual

31
3D-y/C
Optimally separates the color and brightness signal to reduce 
cross-color and dot interference. Press the Point 
7 8 buttons to 
change the 3D-Y/C mode.
  Off  . . . .   3D-Y/C mode is “Off”
  On  . . . .   3D-Y/C mode is “On”
✔Note:
	 •	 3D-Y/C		may	not	appear	depending	on	the	input	signal.
Custom gamma
Adjust R, G, B to get the desired balance of contrast.
Select Custom gamma in the Advanced menu and press the 
Point 
8 or OK buttons. The custom gamma window appears. Use 
the Point 
ed...

32
COLOR MANAGEMENT LIST
Clear the check mark if 
you do not want to apply 
this adjusted color data 
to the projected image. 
Select [Yes] to delete 
the selected color data.
Select the DEL box 
if you want to delete 
the adjusted data. 
A confirmation box 
appears.
COLOR MANAGEMENT
COLOR MANAGEMENT LIST
 Select Color management in the Advanced menu and then 
press the Point 
8 or OK buttons. The COLOR MANAGEMENT 
LIST appears. You can store up to eight (8) color management 
data in the list. 
  In the...

33
To store the adjusted data, select Store and press the Point 8 or 
OK buttons. The User Image Mode Menu appears. Use the Point 
ed buttons to choose one of the five (5) user image modes and 
press the Point 
8 or OK buttons. A confirmation box appears. 
Select [Yes] and then press the OK button.
To exit the User Image Mode Menu, go to the Quit icon and press 
the Point 
8 or OK buttons. The stored data can be called up by 
selecting “User image 1 – 5” in the Image Mode Selection on 
page 27.
Store To...

34
1Press the Point ed buttons to select the Picture adj. Menu 
and press the Point 
8 or OK buttons to access the submenu 
items. 
2Use the Point ed buttons to select the desired item and 
press the Point 
8 or OK  buttons to access the selected 
item. The adjustment bar is displayed. 
Fine sync
Use the Point 7 8 buttons to adjust the value, eliminating a flicker 
from the image displayed (from 0 to +31).
Total dots
Use the Point 7 8 buttons to adjust the number of total dots in 
one horizontal period...

35
This projector has the picture screen resize function which enables you to customize the image size.Press the Point 
ed buttons to select the Screen Menu and 
press the Point 
8 or OK buttons to access the submenu 
items.
Use the Point 
ed buttons to select the desired screen size 
and press the Point 
8 or OK  buttons. The selected item is 
check marked. 
1
2Screen Menu
Screen Size Adjustment
Direct Operation
Press the SCREEN button on the remote control to select a 
screen size from among Full,...

36
Screen
List of the projected imagesImages in the chart below are the examples and differ from the actual images.
Screen: Look dark in the actual setting.
✽
✔Note:
	 •	 The	Screen	Menu	cannot	be	operated	without	an	input	signal.
	 •	 The	 Vertical	adj.	function	is	operated	only	when	Zoom	or	
Anamorphic	is	selected.
When it is in the Zoom or Anamorphic mode, press the Point ed 
buttons to display the Vertical adj. dialog box. Use the Point 
ed 
buttons to adjust the vertical position. The adjusting...

37
The language used in the On-Screen Menu is available in English, 
German, French, Italian, Spanish, Portuguese, Dutch, Swedish, 
Finnish, Polish, Hungarian, Romanian, Russian, Chinese, Korean, or 
Japanese.
Setting
Setting Menu
Menu position
Menu position
This function is used to change the position of the On-Screen 
Menu. Select Menu position and press the Point 
8 or OK buttons. 
The Menu position screen appears. Use the Point 
ed7 8 buttons 
to select the desired position and press the OK button....

38
HDMI 1 setup/ HDMI 2 setup
Select Normal or Enhanced according to the output signal of video 
equipment. Press the Point 
8 or OK buttons to switch between 
each option.
  Normal  . . . .  When the output of video equipment is set to 
“STANDARD.”
  Enhanced . .  When the output of video equipment is set to 
“ENHANCED.”
The names for the output setting of video equipment vary from 
equipment to equipment. For details, refer to the owner’s manual 
of video equipment.
Background
Select the background...

39
Rename
This function is used to change the name of the Input or the User 
image. Select Rename and press the Point 
8 or OK buttons. The 
Rename window appears. Use the Point 
ed buttons to choose 
either Input or User image and then press the Point 
8 or OK 
buttons to display the rename item selection window.
Use the Point 
ed buttons to choose a desired item and press the 
Point 
8 button to display on-screen keyboard.
✔Note:
	 •	 Custom	is	blank	and	check	mark	cannot	be	placed	when	an	item	is	 not...

40
Power off confirmation
When this function is set to “On,” a confirmation dialog box with 
“Power off?” is displayed when turning off the projector (p.19). 
Press the Point 
8 or OK buttons to switch On/Off.  
Capture
This function enables you to capture an image being projected to 
use it for the starting-up display or interval of presentations. 
Select Capture and press the Point 
8 or OK buttons. The 
confirmation box appears and select [Yes] to capture the projected 
image. The captured image will...