Home > Sanyo > Projector > Sanyo Projector Plc Xw15 User Manual

Sanyo Projector Plc Xw15 User Manual

Here you can view all the pages of manual Sanyo Projector Plc Xw15 User Manual. The Sanyo manuals for Projector are available online for free. You can easily download all the documents as PDF.

Page 1

Owners Manual
PLC-XW15
Multimedia Projector
MODEL  

Page 2

2
Before operating this projector, read this manual thoroughly and operate the projector properly.  
This projector provides many convenient features and functions.  Operating the projector properly enables you to
manage those features and maintains it in better condition for a considerable time.
Improper operation may result in not only shortening the product-life, but also malfunctions, fire hazard, or other
accidents.
If your projector seems to operate improperly, read this manual again, check...

Page 3

3
SAFETY INSTRUCTIONS
All the safety and operating instructions should be read before
the product is operated.
Read all of the instructions given here and retain them for later
use.  Unplug this projector from AC power supply before
cleaning.  Do not use liquid or aerosol cleaners.  Use a damp
cloth for cleaning.
Follow all warnings and instructions marked on the projector.
For added protection to the projector during a lightning storm,
or when it is left unattended and unused for long periods of
time,...

Page 4

4
COMPLIANCES
Federal Communication Commission Notice
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part
15 of FCC Rules.  These limits are designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference...

Page 5

5
TABLE OF CONTENTS
FEATURES AND DESIGN 6
BEFORE OPERATION 14COMPUTER MODE 22
VIDEO MODE 29
SETTING 32
APPENDIX 34 PREPARATION 7
NAME OF EACH PART OF THE PROJECTOR 7
SETTING-UP THE PROJECTOR 8
CONNECTING THE AC POWER CORD 8
POSITIONING THE PROJECTOR 9
ADJUSTABLE FEET 9
MOVING THE PROJECTOR 10
CONNECTING THE PROJECTOR11
TERMINALS OF THE PROJECTOR 11
CONNECTING TO THE VIDEO EQUIPMENT 12
CONNECTING TO THE COMPUTER 13
OPERATION OF THE REMOTE CONTROL 14
OPERATING RANGE 14
REMOTE CONTROL BATTERIES INSTALLATION...

Page 6

6
FEATURES AND DESIGN
This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of
use.  The projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal
display (LCD) technology.
Compatibility
This projector widely accepts various video and
computer input signals including;
Computers
IBM-compatible and Macintosh computers up
to 1280 x 1024 resolution.
6 Color Systems
NTSC, PAL, SECAM, NTSC 4.43, PAL-M...

Page 7

7
PREPARATION
NAME OF EACH PART OF THE PROJECTOR
These Air Intake Vents
should not be blocked.
BOTTOM OF THE CABINET
BACK OF THE CABINET
POWER CORD CONNECTOR
FRONT OF THE CABINET
LAMP COVER
ADJUSTABLE FEET
AND 
FEET LOCK LATCHES
PROJECTION LENS
SPEAKER 
(Monaural)
INFRARED 
REMOTE RECEIVER
LENS COVER
This projector is equipped with cooling
fans for protection from overheating.
Pay attention to the following to ensure
proper ventilation and avoid a possible
risk of fire and malfunction.
Do not cover the...

Page 8

NOTE ON THE POWER CORD
The AC Power Cord must meet the requirement of the country where you use the projector.
Confirm the AC plug type with the chart below and the proper AC power cord must be used.
If the supplied AC Power Cord does not match the AC outlet, contact your sales dealer.
SETTING-UP THE PROJECTOR
8
PREPARATION
To the POWER CORD
CONNECTOR on the
projector.
Projector sideAC Outlet side
Ground
To the AC Outlet.(120 V AC)
For Continental EuropeFor the U.S.A. and Canada
This projector uses...

Page 9

9
PREPARATION
POSITIONING THE PROJECTOR
This projector is designed to project on a flat
projection surface.
The projector can be focused from 5.2’(1.6m) ~
26.3’(8.0m).
Refer to the figure below to adjust the screen size.
Screen Size
(W x H) mm
Height (H1)34”
Height (H2)
690 x 518
18.82”(478mm)
1.57”(40mm)
60”
1219 x 914
33.2”(844mm)
2.8”(70mm)
100”
2032 x 1524
55.4”(1407mm)
4.6”(117mm)
150”
3048 x 2286
83.1”(2110mm)
6.9”(176mm)
200”
4064 x 3048
110.8”(2814mm)
9.2”(234mm)
ADJUSTABLE FEET
Picture tilt...

Page 10

10
PREPARATION
When moving the projector, replace the lens cover and retract the feet to prevent damage to the lens and
cabinet.
When this projector is not in use for an extended period,  put it into the case (carrying bag) supplied with this
projector. 
CAUTION IN CARRYING OR TRANSPORTING THE PROJECTOR
Do not drop or bump the projector, otherwise damages or malfunctions may result.
When carrying the projector, use a suitable carrying case.
Do not transport the projector by using a courier or...
Start reading Sanyo Projector Plc Xw15 User Manual

Related Manuals for Sanyo Projector Plc Xw15 User Manual

All Sanyo manuals